Drop resistant flashlight
-
....
-
I would still get that Energizer Hard Case. Rated to survive a 30 foot drop.
It would be interesting to see if you could kill one of those during normal usage. :D
-
@Chako said:
I would still get that Energizer Hard Case. Rated to survive a 30 foot drop.It would be interesting to see if you could kill one of those during normal usage. :D
Chako that light has been higher than that and dropped,I was just trying to make a point led in general(whatever the brand) will take knocks ;)
oh and note: I threw it ;)
-
Yes, but that still does not mitigate gafftapegreenia's statement of breaking flashlights.
So why not go for one that is rated for a 30 foot drop by the manufacturer, and is designed for the construction industry. Your cheap flashlight may take several bounces, but will eventually fail as it was not rated for such abuse. LED or not.
Just my two cents.
-
@Chako said:
Yes, but that still does not mitigate gafftapegreenia's statement of breaking flashlights.So why not go for one that is rated for a 30 foot drop by the manufacturer, and is designed for the construction industry. Your cheap flashlight may take several bounces, but will eventually fail as it was not rated for such abuse. LED or not.
Just my two cents.
Actually you are totally wrong every led is rated for shock proof,now how the Manufactures bond them to a flashlight is totally different ;) it all depends on what quality bonding they choose to make
oh and don't read to much into ratings ;) -
And just to end I indeed had one(rated) from sunlite who are for industry and it failed,$128 is not cheap ;)
[edit] But the $1 light still shines

-
You might try peli lights, they're a little behind the group on led tech but as far as cases, water proofing and just taking a beating they are top notch,
They also have a life time no quibble guarantee, which means what ever happens just take it to a dealer and they'll give you a new one there and then, doesn't matter how trivial the damage is either I've seen this happen when someone snapped off the pocket clip off theirs
-
Fair enough. I know myself; I have broken a few LED flashlights. Yes, they are not as fragile as bulbs...but I can still break them unfortunately. You probably are right also, the LEDs could still be good, but it doesn't seem to do me a lot of good when everything else fails around them.
-
@Chako said:
Fair enough. I know myself; I have broken a few LED flashlights. Yes, they are not as fragile as bulbs...but I can still break them unfortunately. You probably are right also, the LEDs could still be good, but it doesn't seem to do me a lot of good when everything else fails around them.everything around it,PROTECTS IT

-
Get a decent LED light and wrap it in paracord to add some protection. If something breaks it will be the Cree LED falling off the PCB from the shock.
-
Super glue for the paracord you mean? The cree LED is naturally on the PCB when you buy the flashlight -__-
I have had the actual LED fall off the PCB on a stock flashlight, hence why I know that is the failing point -
@Andreas said:
Super glue for the paracord you mean? The cree LED is naturally on the PCB when you buy the flashlight -__-
I have had the actual LED fall off the PCB on a stock flashlight, hence why I know that is the failing pointyou can have your opinions but how the led is bonded to the board makes a difference ;)
-
Sure, but how in heck am I supposed to know what manufacturers use for that procedure? You comment asking me if I use super glue makes absolutely no sense, that's like asking someone what type of brass rod they used to put together a SAK they just bought from a store
-
@Andreas said:
Sure, but how in heck am I supposed to know what manufacturers use for that procedure? You comment asking me if I use super glue makes absolutely no sense, that's like asking someone what type of brass rod they used to put together a SAK they just bought from a storeNo! I said you like super glue SO WHAT!. What I'm trying to say is: led boards DON'T use super glue ::) ;)
-
That doesn't mean they can't fall off. I've had it happen. After all, most of the electronics in such a light is protected within the light, but the reflector can transfer shock to the LED itself, and that might make it come off if its surface mounted like most are. I'm not saying it will happen, I'm just saying that if anything on the light is going to break, that's likely to be it.
Also I don't like super glue in any particular way; I use it on SAK scales because it works perfectly. I still fail to see what me using super glue for SAK scales have to do with manufacturers not using super glue for LED flashlights.
-
@Andreas said:
That doesn't mean they can't fall off. I've had it happen. After all, most of the electronics in such a light is protected within the light, but the reflector can transfer shock to the LED itself, and that might make it come off if its surface mounted like most are. I'm not saying it will happen, I'm just saying that if anything on the light is going to break, that's likely to be it.Also I don't like super glue in any particular way; I use it on SAK scales because it works perfectly. I still fail to see what me using super glue for SAK scales have to do with manufacturers not using super glue for LED flashlights.
Then it makes no difference who makes it ;) cheap/expensive makes no difference if they bond it in the same way

-
I never said they bond it the same way... I think you need to start reading sentences better, would help avoid a lot of confusion
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
you use super glue yes? well FYI the led is held in place with what you choose