My Wave Mod-a-malgamation
-
Indeed, I guess I should have patented it :D
It's such an easy (well I guess that's relative, it took me forever too but it's still not like evil510s mods) mod that don't require a big investment so it's nice to see people do it -
It was kind of a no-brainer for me to try. I'd bought a couple of SAKs exclusively to mod, and had modified one of the scissor back springs to work with the Vic saw, leaving me with a pair of scissors just floating around. It's too bad that adding in other SAK pieces (like the combo tool) would require some welding in order to get them to lock up.
-
Those scissors really do look as if they fit there perfectly :)
-
Great going there on the mods SlackOne

@Andreas said:
Indeed, I guess I should have patented it :D
It's such an easy (well I guess that's relative, it took me forever too but it's still not like evil510s mods) mod that don't require a big investment so it's nice to see people do it*Yes as mentioned before, your version is a more viable and feasible option for the masses since the scissors are readily available. My scissors were built from the ground up and basically one of a kind, until I create more of them. The investment in materials was minimal in comparison to the time invested.....
~ evil ~*
-
In the theme of amalgamation, I'm also modding a Sawzall blade to fit into the Wave's lanyard-loop-holder. The shaping is done (which is quick) and now I need to do a bit of tweaking (which is less quick.) I've used it to saw through some trim and scrap wood lying about, and it is a quicker cut than the Wave's normal saw, and seems to bind less. Harder to get started in the material though, as its teeth are wider. Almost worth it to start the cut with the small saw and move up to this one. I also did the cuts "upside down" of the J-Sews original. This was so that the Wave could be opened up to give something to pull on instead of having to death-fist the body of the tool. Sawzall blades cut on the pull, which is why I did that.
Getting the shape of the lanyard attach was no biggie...traced on and Dremeled in a few minutes. The rub is that the Irwin blade I'm using is apparently a bit thicker than the ones J-Sews was using, or the Charge's lanyard hole is different than the Wave's. The blade is juuuuust thick enough to bind up on the built-in "washer" molded into the Wave's endcaps, so I'm having to bevel the u-notch on the "outside" so it will get past that. I did that, but had to deepen the U a bit, and need to redo it. Pics when I get it working 100%.
-
@SlackOne said:
In the theme of amalgamation, I'm also modding a Sawzall blade to fit into the Wave's lanyard-loop-holder. The shaping is done (which is quick) and now I need to do a bit of tweaking (which is less quick.) I've used it to saw through some trim and scrap wood lying about, and it is a quicker cut than the Wave's normal saw, and seems to bind less. Harder to get started in the material though, as its teeth are wider. Almost worth it to start the cut with the small saw and move up to this one. I also did the cuts "upside down" of the J-Sews original. This was so that the Wave could be opened up to give something to pull on instead of having to death-fist the body of the tool. Sawzall blades cut on the pull, which is why I did that. If I remove the tooth closest to the Wave, it'll work with the tool closed as well.Getting the shape of the lanyard attach was no biggie...traced on and Dremeled in a few minutes. The rub is that the Irwin blade I'm using is apparently a bit thicker than the ones J-Sews was using, or the Charge's lanyard hole is different than the Wave's. The blade is juuuuust thick enough to bind up on the built-in "washer" molded into the Wave's endcaps, so I'm having to bevel the u-notch on the "outside" so it will get past that. I did that, but had to deepen the U a bit, and need to redo it. Pics when I get it working 100%.
-
Erm...I have no idea where that post where I quoted myself came from.

Anyways, here are pics.
<a href="http://www.flickr.com/photos/bekkiandquanah/4974117539/" target="_blank" rel="noopener noreferrer"><img src="http://farm5.static.flickr.com/4154/4974117539_7dc5a5ccb0.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Wave detachable saw by Bekki And Quanah, on Flickr<a href="http://www.flickr.com/photos/bekkiandquanah/4974117329/" target="_blank" rel="noopener noreferrer"><img src="http://farm5.static.flickr.com/4085/4974117329_15afe6f301.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Wave detachable saw by Bekki And Quanah, on Flickr<a href="http://www.flickr.com/photos/bekkiandquanah/4974117167/" target="_blank" rel="noopener noreferrer"><img src="http://farm5.static.flickr.com/4086/4974117167_7ee8d43e9c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Wave detachable saw by Bekki And Quanah, on FlickrWorks pretty well now. Later when I have another couple of spare bucks, I'll do a metal or grit saw. I'm going to leave it full length for now as it'll most likely end up in the man bag and not on my person most of the time, as I don't holster-carry my Wave.
-
That be a Bob mod.

-
Yup tried to give Bob/J-Sews props a couple posts back. Now I'm up to Bob, Evil, and Andreas as the sources for the mod. Removing the lanyard in order to mount both the clip and the lanyard simultaneously was actually from your Kwakster-modded Charge :)
-
That's a long saw blade! :D I never tried one that long. Does it want to bend/bind up on you during use?
-
So far, no. But I've mostly tested it on stuff like scrap trim and some 3/4" flooring plywood. I doubt it will bind too much since it's not double cut...I don't apply much pressure at all on the push, only on the pull. The real test will be putting it to some living green wood. Trimming limbs always seems to bind my regular Wave saw, we'll see what this thing does :)
Oh...and I only got one this long because it was as short as I could get without buying a whole pack of the things. I don't have a Sawzall, so I'd have ended up with a bunch of blades if this wasn't my thing.
Then again...might have been a good (weak) excuse to get a Sawzall :)
-
Sawzall's are damn handy to have around for sure.
If you get the chance, grab one of the 18volt battery ones. For the occasional sawzall user, the battery charge lasts plenty long enough, and it is well worth it because of how convenient it is to use. :) -
Yeah, I'd love a Sawzall of any flavor. The battery power ones do look nice...I'd like to convert over to battery for a number of things, like our drill. I tend to tie myself up in the cords, especially when I'm on a ladder :-[
Tried the saw out on live wood, trimming a few limbs to stick up a baby swing for lil' Slack Two. The blade whizzed through 1 1/2" limbs quite nicely, on a tree that's given my stock Wave saw fits. No binding or bending at all, just lost a little paint on the teeth.
-

Amazing mods! 90° lock?? Now this I have to see.
Starting to wish I would of found MTO <u>before</u> ordering a Surge, could of had it all in Wave size!
I ♥ my Surge though, projects seem to go much easier. Screws even cringe at the sight of a BIG BLACK OXIDE SURGE!Now we need a sticky that links all the cool mods into one [u]Easy To Find directory, by maker and/or tool. Oh waiter!
-
Off you go then

-
Thanks Xelkos. You'll find that the more you look around on this site, the more fab ideas you find lurking in the back corridors. My task now is to try and find something original to do with the Wave :) I have an idear, but I'll have to back burner it for a while since I'm slowly but surely bashing out the tile floor in my bathroom :/
In the meantime, that mini driver and can opener just gots to GO. Think I'll post in the wanted tools for a couple of bits from a Charge, if anyone has any spares floating around...
-
Not too keen on the mini bit driver - those should be on mini-tools like the Squirts. To think a guy actually broke one in his teeth thinking it was a steel toothpick. Yeowch!
♥ the Can/Bottle Opener/Wire Stripper. Some times I wonder if the mini-bit driver was used more for "filler" than anything else. Rather of had a (
) fold out carabiner there! 
-
I've been trying to figure out what to do further with my Wave as well. TBH it's become seriously redundant since I got the PS4, the latter does most the things I used the Wave for and more. Only useful tool I find on the inside of the Wave is the bit driver but I don't have anything to put in there more useful than the other tools that are already there. Frankly I want a Juice S2 :ahhh but that one would be redundant as well
-
I will end up with a Juice S2 or a Freestyle. I'm up in the air at the moment which would suit me better. The Freestyle would better compliment the custom SAK I'm putting together, but the S2 is just such a sweetheart. Bah.
In other news, I just flattened the shank to a Torx 25 driver to fit into my Wave's bit holder. Doesn't take long, but doing it with a vice, a rotary sanding drum, and the Mk.1.0 Eyeball meant for a bit of try it-grind it-try it action. Why a T-25? Well, I want to do a long Phillips but I have a bunch of T-25 power bits lying around and wanted to get some practice in first. I use Torx woodscrews, and every box has another bit in it...why do I need a half dozen? :P
-
@SlackOne said:
I will end up with a Juice S2 or a Freestyle. I'm up in the air at the moment which would suit me better. The Freestyle would better compliment the custom SAK I'm putting together, but the S2 is just such a sweetheart. Bah.In other news, I just flattened the shank to a Torx 25 driver to fit into my Wave's bit holder. Doesn't take long, but doing it with a vice, a rotary sanding drum, and the Mk.1.0 Eyeball meant for a bit of try it-grind it-try it action. Why a T-25? Well, I want to do a long Phillips but I have a bunch of T-25 power bits lying around and wanted to get some practice in first. I use Torx woodscrews, and every box has another bit in it...why do I need a half dozen? :P
Sale on T-25's today? :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login