Rusty scissor pivot
-
What do you recommend to remove the rust from the scissor pivot on my beloved Explorer? I don't have a problem anywhere else on this tool, yet, I use the scissors a lot and would appreciate ideas on how to make them less sticky. (It has a rivet for a pivot)
Tried 3 in 1, TriFlo, dish soap and warm water, all to no avail. What do you think? ???
Thanks! -
I had some rust on the can opener on my Juice S2. I used WD40 and very fine sandpaper to get it out. Worked well for me.
-
Rust on a Vic?!?! I thought that wasn't possible. :D
-
I usually start with a razor blade and scrape any visible areas around the pivot point and then work some oil into it.
It might be worth giving some dental floss a shot with some oil on it. Just work it in and around the joint to try and loosen it up.

-
Thanks! I'll give these a try and report back in a few days.

-
If that don't work,try liquid wrench penetrating oil.

-
Or just be sure to work the wd-40 into the pivot and let it sit for some time. I think maybe you were not patient enough.
-
all good suggestions.
I'd soak it in mineral spirits and scrub it with a soft copper brush.
-
Soft copper or brass bristle brush is a good idea, it won't mar or scratch up the steel. Should work great, but soak it in some sort of oil ect. first to soften up the rust.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
