Charge saws
-
@Grant Lamontagne said:
Did you see the video?Def
You realize, as being a near-n00b here, I have to
this! -
Bob and I discussed producing a number of these for sale to members, and it is indeed a possibility.
Def
-
I made the one in my avatar a few days ago. $2 saw blade + dremel + cutting wheel + chainsaw sharpener = cheap and cheerful fun. Works pretty well, too. The solid side panels on the Charge might be sturdier in the long run than my Wave, though.
-
@SlackOne said:
I made the one in my avatar a few days ago. $2 saw blade + dremel + cutting wheel + chainsaw sharpener = cheap and cheerful fun. Works pretty well, too. The solid side panels on the Charge might be sturdier in the long run than my Wave, though.Not meant to troll the thread, but what Dremel did you use? Seen Dremel has a lot of different models out compared to the old black one I used to have. Been considering buying a new one.
-
The one I used for this was actually my wife's Black and Decker Wizard, so not a real Dremel. I'm not sure they even make it any more, came in a set with a Mouse mini sander. Not a bad one at all, variable speed and a good chuck.
-
@Xelkos said:
I made the one in my avatar a few days ago. $2 saw blade + dremel + cutting wheel + chainsaw sharpener = cheap and cheerful fun. Works pretty well, too. The solid side panels on the Charge might be sturdier in the long run than my Wave, though.
Not meant to troll the thread, but what Dremel did you use? Seen Dremel has a lot of different models out compared to the old black one I used to have. Been considering buying a new one.
Get either the 300 or 4000. 4000 is the fancy version, get that one if you can afford it. The 300 is the "normal" one. Don't get any of the battery powered ones, the engraver, the stylus or any of that. Also get a flex shaft attachement, that is a must have on a Dremel
-
@Grant Lamontagne said:
Did you see the video?Def
I so want a set.

-
We are working on it. Really...
Def
-
Did you, or whomever makes these, create a jig to cut them out?
-
Bob, aka J-Sews, aka the man whut done them, is a machinist. He magicked them up with his michinistry. :D
Def
-
I would love a wood and metal or an entire set. Longer or shorter ones are fine.
-
@Grant Lamontagne said:
Bob, aka J-Sews, aka the man whut done them, is a machinist. He magicked them up with his michinistry. :DDef
Think he could make an attachable awl to fit there too? That would solve a huge problem with awls on the Charge & Wave. Have an elongated thread-bore too. This way the awl can be used pushing, pulling, and moderate twisting.
The large bit driver versions are only good for twisting and pushing. Pulling the awls get pulled out of the bit driver, this useless for emergency sewing needs.
-
It's been done, but damned if I can find a thread about it other than mentioning Chaka from EDCForums (not Chako) was working on selling some awls made from S30V but they got binned when his company was hit by layoffs. I know someone has a working example of this type of mod, but I can't find it :/
-
You shouldn't be quite so subtle around here. I mean, I know you are trying to tell me something but I'll be damned if I know what it is....
Def
-
Oh, the
?
Posted the YouTube video on the Leatherman FB page, it drew attention. Maybe y'all will get more memberships going, for the discount. :DLeatherman is giving away a MUT tomorrow morning for naming ideas. <-- Changed the wording.
I'm a slacker, only in that I have far less
than it may appear. -
I don't usually join in with Leatherman's giveaways, or anyone else's really. I would hate for anyone to think any manufacturer was officially endorsing a bunch of yahoos like us, and you know how rumors get started....
Anyways, yes, we are working on them, and as soon as I have anything to report, I will report it. Until then, I've not got a lot to say about it unfortunately. We are at the same impasse we have been at for a while on them.
Def
-
I went an snipped that remark like a

Was a bad smurf, I edited out that thing and changed message slightly more to what I was referring to. I know, am in the doghouse for doing that.

-
No problem- I just like to take the opportunity every now and then to remind everyone that we are an independent organization, and because of that I don't enter contests because you never know how the masses may interpret something, regardless of how above board it may be. :D
As for re-posting our videos, pictures etc, well, they are out there on the Web, so by all means, use them wherever you like.
Def
-
Say, you experts over here making and using saw attachments, have to ask: Have you ever damaged the end of your Charge/Wave/Surge by using a saw blade there?
I'm staring at the metal and looks to me the blade metal would break way before damaging the Leatherman, and that bolt that holds the drivers in is solid - never seen nor heard of anyone breaking that.
There's some debate over on the Leatherman FB page that a few are thinking making an attachment there is going to damage the tool and void the warranty.

Myself I would think extending the tabs just a bit longer would cause less wobble/slop, but that's just a minor observation.
Heard y'all say that Leatherman's developers were looking at them saw attachments. Did they ever comment anything about them, or anything negative? Did Leatherman make any official post saying that by using the saws or any attachment there past their accessories woudl void the warranty?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login