Charge saws
-
@Grant Lamontagne said:
Did you see the video?Def
I so want a set.

-
We are working on it. Really...
Def
-
Did you, or whomever makes these, create a jig to cut them out?
-
Bob, aka J-Sews, aka the man whut done them, is a machinist. He magicked them up with his michinistry. :D
Def
-
I would love a wood and metal or an entire set. Longer or shorter ones are fine.
-
@Grant Lamontagne said:
Bob, aka J-Sews, aka the man whut done them, is a machinist. He magicked them up with his michinistry. :DDef
Think he could make an attachable awl to fit there too? That would solve a huge problem with awls on the Charge & Wave. Have an elongated thread-bore too. This way the awl can be used pushing, pulling, and moderate twisting.
The large bit driver versions are only good for twisting and pushing. Pulling the awls get pulled out of the bit driver, this useless for emergency sewing needs.
-
It's been done, but damned if I can find a thread about it other than mentioning Chaka from EDCForums (not Chako) was working on selling some awls made from S30V but they got binned when his company was hit by layoffs. I know someone has a working example of this type of mod, but I can't find it :/
-
You shouldn't be quite so subtle around here. I mean, I know you are trying to tell me something but I'll be damned if I know what it is....
Def
-
Oh, the
?
Posted the YouTube video on the Leatherman FB page, it drew attention. Maybe y'all will get more memberships going, for the discount. :DLeatherman is giving away a MUT tomorrow morning for naming ideas. <-- Changed the wording.
I'm a slacker, only in that I have far less
than it may appear. -
I don't usually join in with Leatherman's giveaways, or anyone else's really. I would hate for anyone to think any manufacturer was officially endorsing a bunch of yahoos like us, and you know how rumors get started....
Anyways, yes, we are working on them, and as soon as I have anything to report, I will report it. Until then, I've not got a lot to say about it unfortunately. We are at the same impasse we have been at for a while on them.
Def
-
I went an snipped that remark like a

Was a bad smurf, I edited out that thing and changed message slightly more to what I was referring to. I know, am in the doghouse for doing that.

-
No problem- I just like to take the opportunity every now and then to remind everyone that we are an independent organization, and because of that I don't enter contests because you never know how the masses may interpret something, regardless of how above board it may be. :D
As for re-posting our videos, pictures etc, well, they are out there on the Web, so by all means, use them wherever you like.
Def
-
Say, you experts over here making and using saw attachments, have to ask: Have you ever damaged the end of your Charge/Wave/Surge by using a saw blade there?
I'm staring at the metal and looks to me the blade metal would break way before damaging the Leatherman, and that bolt that holds the drivers in is solid - never seen nor heard of anyone breaking that.
There's some debate over on the Leatherman FB page that a few are thinking making an attachment there is going to damage the tool and void the warranty.

Myself I would think extending the tabs just a bit longer would cause less wobble/slop, but that's just a minor observation.
Heard y'all say that Leatherman's developers were looking at them saw attachments. Did they ever comment anything about them, or anything negative? Did Leatherman make any official post saying that by using the saws or any attachment there past their accessories woudl void the warranty?
-
Don't know about the warranty part
but my saw blade locks in very tight and allows for hardly any play at all so it doesn't seem to be affecting my Wave at all 
-
Couple of us have noticed a lot more play in the pocket clip and lanyard attachment on the Surge. Would that also affect using saws on the Surge, if someone wanted to go that way to avoid blade exchanger issues?
Seems the blade exchanger is a bit too thick and people have had to cut the end of a t-base off to use as a shim in order to use that as a saw attachment. Unsure of the Super Tool 300 EOD has the same issue with its blade exchanger or not. Anyone have one yet?
Wonder if by extending the tabs down another half of an inch, would that provide better stability on Surge ends?
-
2nd try on a Charge saw. The 1st one wobbled too much and wasn't staying engaged. This second version was more tighter and held in better in use.

Extended the bottom tab in further which kept the blade from wobbling so much during use. Also, this design also works well with the Surge, barely any wobble up and down.
Anyone have a close-up shot of theirs to compare with? -
Now that is a SAW 8) 8) 8).
Top stuff X

-
Hoping it warms up just a tad more. Studied the thread in a more relaxed mode, and seems maybe keeping the saw blade the way J-Sews did is would be better in that the closed handle supports the saw blade from wobble.
Need to shorten this Sawsall blade anyhow (so it can fit in the sheath for EDC) and have enough Dremel sanding drums to work that shoulder curve.
Wished I could get a set, or a few, from J-Sews. :D
-
@Xelkos said:
Hoping it warms up just a tad more. Studied the thread in a more relaxed mode, and seems maybe keeping the saw blade the way J-Sews did is would be better in that the closed handle supports the saw blade from wobble.Need to shorten this Sawsall blade anyhow (so it can fit in the sheath for EDC) and have enough Dremel sanding drums to work that shoulder curve.
Wished I could get a set, or a few, from J-Sews. :D
The guy can be a real scrooge, but I'll talk to him and see what he says. ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

