Charge saws
-
-
I'll pationlly wait.

-
@Xelkos said:
I made the one in my avatar a few days ago. $2 saw blade + dremel + cutting wheel + chainsaw sharpener = cheap and cheerful fun. Works pretty well, too. The solid side panels on the Charge might be sturdier in the long run than my Wave, though.
How did you use the Chainsaw Sharpener to cut yours, SlackOne?
The chainsaw sharpener was one of the Dremel grinding bits I had on hand...long and thin to get into the teeth of chainsaw blades. It just happened to also be an elegant shape to do clean up on the cuts I did with the cutting wheel.
-
Getting a Surge in the new year would be happy to test it out for you :)
am always dithering about with knives cutting away unwanted things. -
Bad news:
The saw blade idea will NOT work in my Surge. :( It has a little cast rounded D-shape component at the end of the handle, which is only held in place with the one screw. During sawing motion, the Sawzall blade overpowers this one screw and flops around uncontrollably.I beg to differ. I am working on a solution for the moving clip for the Surge and I will send you the particulars soon. I believe it can be done. If I am wrong I will admit in this forum.
-
J-Sews
The blade works GREAT! Used it to cut a few knobs of metal, and even some wood. Marred up the paint so stripped it off, polished it up, and now EDCing it in the leather Charge sheath. Soon as I get over this bug am going to get some carbon sawsall and keyhole blades to hopefully whittle out to fit.
Soon as I got time to do something I got held hostage by an alien virus. Knew I should of gotten that flu shot this year... :'(
-
@Xelkos said:
I made the one in my avatar a few days ago. $2 saw blade + dremel + cutting wheel + chainsaw sharpener = cheap and cheerful fun. Works pretty well, too. The solid side panels on the Charge might be sturdier in the long run than my Wave, though.
How did you use the Chainsaw Sharpener to cut yours, SlackOne?
The chainsaw sharpener was one of the Dremel grinding bits I had on hand...long and thin to get into the teeth of chainsaw blades. It just happened to also be an elegant shape to do clean up on the cuts I did with the cutting wheel.
Seen a tungsten carbide one for $14, almost got it. Need to get some more fiberglass cut-off wheels too.
<3 your blue blade. Wonder if I can find one in red? >:D
-
@Xelkos said:
J-SewsThe blade works GREAT! Used it to cut a few knobs of metal, and even some wood. Marred up the paint so stripped it off, polished it up, and now EDCing it in the leather Charge sheath. Soon as I get over this bug am going to get some carbon sawsall and keyhole blades to hopefully whittle out to fit.
Soon as I got time to do something I got held hostage by an alien virus. Knew I should of gotten that flu shot this year... :'(
Good to hear its working out for you! :) (hope you're feeling better soon too) :-\
-
Love this thread! Way to go Bob!
The original idea for this seems truely inspired, but it's nice to read how it came about from just a regular multitool user's needs.
Something like this could make one buy the tool just to test this great idea and to see how many more 'attachments' one could make. With the saw blade being so thin and fitting in the pouch, they are a true classic.
-
J-Sews does such a wonderful job.
No way can an amateur with a Dremel match the superiority of a machine that J-Sews uses.

-
The Saw blades can also be used on the Surge as the play problem is now solved:
/topic/25502 -
Would like to get a few more of these precision fitting blades. Snipped off the lanyard loop on my Charge to use the Charge Saw Blades without having to remove the pocket clip.
The only Leatherman I used the lanyard clip was on a Squirt S4 and lost it for a few days when it caught on something during a 2010 Census contact. The recluse had junk all around the house and was difficult getting to the front door. Was like a castle fortress. :o
-
I have just found earlier today this topic and I really think it is a great mod! Well thought of and well executed by J-sews!
The machine you used is a manually controlled one or a CNC? I would like to add a set of saw blades to the Wave I am gonna buy soon and was thinking to ask whether you still have the file (program) if you used a CNC and would share it, 'cos I know friend who knows a friend that has access to a CNC machine ;)
Thank you!
-
Sorry to bump up an older topic but are you planning on making any more of these please J-Sews?
-
Have you seen Tofty's saw holder?
</topic/47167
-
@Cupboard said:
Have you seen Tofty's saw holder?</topic/47167
Yes, funnily enough after J-sews topic here and some time back I looked into making a commercial holder myself and did some designs (I'm involved with a large UK engineering company) but the tricky design, limited market size and (as can be seen by Tofty's product) cost meant it didn't get far. I like the J-Sews simplicity.
-
I have had several requests recently, so yes I will make another small run.
I will make a post in this thread when they are ready.Bob :)
-
Awesome, thanks Bob - not sure what blades you'll be doing but I for one will happily purchase a set of various tpi's if you make them.

-
@J-sews said:
I have had several requests recently, so yes I will make another small run.
I will make a post in this thread when they are ready.Bob :)
I like the Charge-Saw too. This cut allows one to extend their handle for ease in cutting, and for longer reach, or fold up the handle if desired.

The one on the bottom was one I had made, but the cut wasn't as exact as yours and wobbled a lot. Is great to have a precision-cut set of metal, all-purpose, and a wood saw blade. (Again, I emphasize the longer reach is desirable - least for me.)
Also had removed the annoying and hard-to-get-out lanyard loop. Can use the Charge-Saw blade while having the pocket clip still attached.

-
EDC Source still selling these Charge Saws, by none other than the famous J-Sews?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login