Tool Quality Question
-
I agree with what has been said. Is the phillips ground well, is the knife ground well also, is there play in the pliers or tools (wiggle)
-
I like a nice tight tool with implements that work well. Nothing worse than having a can opener that doesn't open cans, or an awl that isn't sharp.
-
My impressions of quality begin the moment I lay eyes on a tool. Even in a store, hanging on a rack, still in the blister pack, I'm evaluating it's quality. Is there plastic used in the construction? I'd rather there wasn't. Are the handles cast metal, or stamped? They'd better be stamped. Do the individual tools appear useful and well-formed, or are they just "filler" meant to give the appearance of adding more functions. Polished or sanded metal finishes imply attention to detail to me. Bead blast metal finishes imply just the opposite. The plier head itself should have crisp edges all around, inside the jaws and out, not rough inconsistent bevels that look like they were done by hand on a snag grinder.
All of these are quality cues I try to notice before even handling a tool.
-
@J-sews said:
My impressions of quality begin the moment I lay eyes on a tool. Even in a store, hanging on a rack, still in the blister pack, I'm evaluating it's quality. Is there plastic used in the construction? I'd rather there wasn't. Are the handles cast metal, or stamped? They'd better be stamped. Do the individual tools appear useful and well-formed, or are they just "filler" meant to give the appearance of adding more functions. Polished or sanded metal finishes imply attention to detail to me. Bead blast metal finishes imply just the opposite. The plier head itself should have crisp edges all around, inside the jaws and out, not rough inconsistent bevels that look like they were done by hand on a snag grinder.All of these are quality cues I try to notice before even handling a tool.
Seems like a waste of time in your case since your gonna buy at least one of everything anyway. Good or bad quality :D
-
My impressions of quality begin the moment I lay eyes on a tool. Even in a store, hanging on a rack, still in the blister pack, I'm evaluating it's quality. Is there plastic used in the construction? I'd rather there wasn't. Are the handles cast metal, or stamped? They'd better be stamped. Do the individual tools appear useful and well-formed, or are they just "filler" meant to give the appearance of adding more functions. Polished or sanded metal finishes imply attention to detail to me. Bead blast metal finishes imply just the opposite. The plier head itself should have crisp edges all around, inside the jaws and out, not rough inconsistent bevels that look like they were done by hand on a snag grinder.
All of these are quality cues I try to notice before even handling a tool.
Seems like a waste of time in your case since your gonna buy at least one of everything anyway. Good or bad quality :D
Oi!

:D
How will I know the good ones if I don't have the bad ones to compare them too? :D :D
-
I naturally agree with all of the above.

May I also add, to a lesser extent of course, the relation of the purchase cost to the perception of quality.I am annoyed by a minute rubbing on the cutting bit of my swisstool pliers (which could be necessary for good cutting performance, for all I know) and I don’t really care about the 2mm+ misalignment in the handles of the Bahco multitools I have (at least it is the same in both of them, so they have good consistency here), or the 1mm misalignment on the pliers head of one of them.
Talking of consistency, most multitools are able to get the blades they have reasonably right, that is, they are reasonably sharp, cut when needed, appear strong enough for the occasional use. However, better quality multitools get other things right too, a typical example that was mentioned many times by others is the Philips driver design (that is, they actually should fit Philips screws). Also files that actually can file something, scissors that work etc.
Also a good “solid” feel (read heavy), good “snap”, good feel of materials (G10 feels, to me, better than FRN, though, funnily enough, I am quite happy with the Victorinox plastic scales…), strength proportional to the size of the multitool, good finish, no ratling etc.
-
@dks said:
I naturally agree with all of the above.
May I also add, to a lesser extent of course, the relation of the purchase cost to the perception of quality.I am annoyed by a minute rubbing on the cutting bit of my swisstool pliers (which could be necessary for good cutting performance, for all I know) and I don’t really care about the 2mm+ misalignment in the handles of the Bahco multitools I have (at least it is the same in both of them, so they have good consistency here), or the 1mm misalignment on the pliers head of one of them.
Talking of consistency, most multitools are able to get the blades they have reasonably right, that is, they are reasonably sharp, cut when needed, appear strong enough for the occasional use. However, better quality multitools get other things right too, a typical example that was mentioned many times by others is the Philips driver design (that is, they actually should fit Philips screws). Also files that actually can file something, scissors that work etc.
Also a good “solid” feel (read heavy), good “snap”, good feel of materials (G10 feels, to me, better than FRN, though, funnily enough, I am quite happy with the Victorinox plastic scales…), strength proportional to the size of the multitool, good finish, no ratling etc.
I love the snap of Vic knives. That's one thing that bugs me about my LM's, the only models that really snap are the Juices, and they don't snap much. BUT, my steadfast companion for awhile now is the LM Pulse, with no end in sight. (kinda taking a liking to my new gerber mp450, but it is my around the house tool)
-
@Mercury said:
I love the snap of Vic knives. That's one thing that bugs me about my LM's, the only models that really snap are the Juices, and they don't snap much. BUT, my steadfast companion for awhile now is the LM Pulse, with no end in sight. (kinda taking a liking to my new gerber mp450, but it is my around the house tool)+1!
I think Victorinox multitools are on top-drawer when it comes to quality (fit & finish, consistency, snap or "walk and talk", as mentioned above). However, if you were to ask me to empty my pockets, 90% of the time you would have an LM Pulse laid out in front of you. The original LM frame design (PST, Pulse, ST200, etc.) was a quality product without being overcomplicated and overburdened with weight, unlike many of the more modern designs. I guess what I'm getting at is that I think quality can manifest itself in the efficiency of the overall design--it isn't always a tangible characteristic.
-
I love the snap of Vic knives. That's one thing that bugs me about my LM's, the only models that really snap are the Juices, and they don't snap much. BUT, my steadfast companion for awhile now is the LM Pulse, with no end in sight. (kinda taking a liking to my new gerber mp450, but it is my around the house tool)
+1!
I think Victorinox multitools are on top-drawer when it comes to quality (fit & finish, consistency, snap or "walk and talk", as mentioned above). However, if you were to ask me to empty my pockets, 90% of the time you would have an LM Pulse laid out in front of you. **The original LM frame design (PST, Pulse, ST200, etc.) was a quality product without being overcomplicated and overburdened with weight, **unlike many of the more modern designs. I guess what I'm getting at is that I think quality can manifest itself in the efficiency of the overall design--it isn't always a tangible characteristic.
Totally agree with this. (Well except that I didn't like the ST200 locks). In fact, I sorta shelved my original Wave, preferring the PST. The PST was compact, light and extremely functional. It didn't move out of EDC until I picked up a Skeletool.
-
@Mr. Whippy said:
I love the snap of Vic knives. That's one thing that bugs me about my LM's, the only models that really snap are the Juices, and they don't snap much. BUT, my steadfast companion for awhile now is the LM Pulse, with no end in sight. (kinda taking a liking to my new gerber mp450, but it is my around the house tool)
+1!
I think Victorinox multitools are on top-drawer when it comes to quality (fit & finish, consistency, snap or "walk and talk", as mentioned above). However, if you were to ask me to empty my pockets, 90% of the time you would have an LM Pulse laid out in front of you. **The original LM frame design (PST, Pulse, ST200, etc.) was a quality product without being overcomplicated and overburdened with weight, **unlike many of the more modern designs. I guess what I'm getting at is that I think quality can manifest itself in the efficiency of the overall design--it isn't always a tangible characteristic.
Totally agree with this. (Well except that I didn't like the ST200 locks). In fact, I sorta shelved my original Wave, preferring the PST. The PST was compact, light and extremely functional. It didn't move out of EDC until I picked up a Skeletool.
The PST is a wonderful tool, and I (rarely) edc it sometimes. The pulse is what I consider to be a perfected PST, and since buying the pulse, I have not had the desire to swap it out for something else as far as EDC goes.
-
On the question as to what quality is my thoughts are pretty simple; can it do the job it was designed to do? Is it well enough built to last a long time doing that job?
Within those two questions are many little decisions to be made; how comfortable is it, will it rust away, can I get the components out, will it actually turn a Phillips screw etc etc. But really it's covered by the two basic questions.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login