Kender's Collection Thus Far
-
Any pics yet.. ??

...
What about now..?? :ahhh :ahhh
...
PICS!!

:D
-
@Kender said:
Iknowiknowiknow! There will be pics just as soon as I can find my camera. Patience!Also, is there any way to hide portions of my post and make those sections expandable? May be necessary.
Also also, I got another Leatherman today...
Well does this forum have spoiler tags?
Spoiler:
Guess not :(
-
Alright--camera found, pics taken. Gonna do some editing and then they'll be added into my original post. Be patient, there are a lot of them!
I got pics of the new one too, and I'll post those when I get there. :P
-
Great..

-
It doesn't seem to want to let me edit my first post, so pictures go here instead!
Without further ado:
PST - Circa 1985-1989; Japan







PST - October/December 1994; USA; Marlboro Country Store





PST - Circa Late '80s/early '90s; USA


PST II - January 1996







Super Tool - November/December 1995



A couple of Super Tool/PST size comparison pics:


Micra - October 2009




I found a leather case that's perfect for a Micra, so I keep it in this so that my keys don't damage it. I actually bought three of this case. Thrift stores are great. :)



New Wave - September/October 2010




Juice C2 (Red) - September 2001







Squirt P4 (Glacier Blue) - August 2007 and June 2002
Since they're identical, save for wear and date codes, these two were photographed together.


Style CS - September 2010



Next up, the new Leatherman tool that I got today.
-
Great pics of some well loved and well used tool

-
New addition:
Blast - September 2006
Acquisition: Purchased from a man off of Craigslist. In like-new condition, it appears to never have been used. It was a steal at $20 (I see it retail for about $60.)
Markings: Inside both scales, underneath the tools are the markings "1B", and the base of the Phillips screwdriver has the marking "B1" (not "1B" again).
Notes: I believe this to be an unremarkable Blast, although any interesting markings have been noted.
I have also noted the lack of any sort of "USA" marking on any portion of the tool itself.




And with that, I bid you a good night! Enjoy!
-
@Kender said:
It doesn't seem to want to let me edit my first post, so pictures go here instead!Without further ado:
PST - Circa 1985-1989; Japan







PST - October/December 1994; USA; Marlboro Country Store





PST - Circa Late '80s/early '90s; USA


PST II - January 1996







Super Tool - November/December 1995



A couple of Super Tool/PST size comparison pics:


Micra - October 2009




I found a leather case that's perfect for a Micra, so I keep it in this so that my keys don't damage it. I actually bought three of this case. Thrift stores are great. :)



New Wave - September/October 2010




Juice C2 (Red) - September 2001







Squirt P4 (Glacier Blue) - August 2007 and June 2002
Since they're identical, save for wear and date codes, these two were photographed together.


Style CS - September 2010



Next up, the new Leatherman tool that I got today.
Schweet!
-
Thanks for the update,great pictures.

-
Juice Pro - February 2002
Acquisition: Purchased from a pawn shop in January 2011, Portland, OR. ($20, with sheath)
Markings: The Phillips screwdriver bears the mark "1F"--same as the Juice C2. The base of the pliers also bear markings on both sides just above where they connect to the scales: With the tool open and the Leatherman logo facing the viewer, "1" is on the left plier, and "F" on the right. On the other side, "1" and "C". Meaning is currently unknown.
Notes: I believe this to be an unremarkable Juice Pro, although any interesting markings have been noted.
Like the Juice C2, the knife blade on the Juice Pro does not have "LEATHERMAN" stamped on it.
It's also worth noting that the Juice Pro does not say "USA" anywhere on the tool.
The Juice Pro was produced for only four years from 2001-2005.
I forgot to photograph the tweezers--I do hope this is acceptable.
I like this one, and I think I got it at a pretty good price. It was $25 at a pawn shop, and I talked her down to $20 (USD). For a tool as hard to find as this one, I think I got a good deal.







-
love all the pics.
I need to get a juice s2! -
You sure do. I love the Juice design, but I have to say this: I have not had a good time with the Juice corkscrews. I think that if I were actually going to EDC a Juice (I don't) I would probably want one that does not have a corkscrew. Maybe it was just that the cork in the bottle of wine I had was in too tight, but I could not get it open with my Juice Pro. My hand still hurts from trying.
The foil cutter was excellent, though. :P
-
Mini Tool - Manufacture Date Unknown
Acquisition: Purchased at a flea market in Gresham, OR. January 22nd, 2011. $4.
Logo: Small "LEATHERMAN® MNI TOOL"
Below Logo/Trademark: "US PAT 4744272"/"PORTLAND OR"
Scale Joints: Knurled screws; lanyard attachment
Ruler: Inches/centimeters
Pliers: Stamped "LEATHERMAN USA"
Knife Blade: Clip point; stamped "LEATHERMAN USA" (Broken tip)
File: No stamp (Almost completely broken)Additional notes:
Has a "Full Circle" advertising logo. Was very dirty but cleaned up nicely. All the mechanics of opening and closing the tool work smoothly, and the pliers are in great shape. The knife blade has the tip broken off, and the file is broken all the way down to about 1/4" above its base. The handle "extensions" are in good shape and show fairly little wear.This tool did not have a sheath.






A few pictures of the Mini Tool with a PST and a Super Tool for size comparison:
Top to bottom: Super Tool, PST, Mini Tool
The unfortunate damage on the knife and file.


And a closeup of the pliers for comparison.
Top from left to right: Super Tool, PST
Bottom: Mini Tool

So I know it's a long shot, but does anyone for some bizarre reason happen to have any parts lying around that might happen to include a Mini Tool knife blade and/or file? If so,

-
That Pro for $20 was a steal! Great finds mate.
-
Thanks! I'm happy with it. Just need to work a nick out of the blade. You should have seen it when I got it, though. Dirty, and it looked as though someone had tried to jam a cookie into it. It was pretty bad. Cleaned up nicely, though.
-
@Kender said:
You sure do. I love the Juice design, but I have to say this: I have not had a good time with the Juice corkscrews. I think that if I were actually going to EDC a Juice (I don't) I would probably want one that does not have a corkscrew. Maybe it was just that the cork in the bottle of wine I had was in too tight, but I could not get it open with my Juice Pro. My hand still hurts from trying.The foil cutter was excellent, though. :P
good to know.
I was considering it, but I don't have a need for a corkscrew and I like the looks of the juice w/o the corkscrew. (I'm picky) -
Universal Tool Adapter - March 2000
Acquisition: Purchased from a man in California via Craigslist in January 2011
This is, as far as I know, a Universal Tool Adapter and not the Standard Tool Adapter. It seems to fit my (New) wave the best, but also seems to work well with my Blast, PST, and (surprisingly) Juice Pro. It does not fit the Juice C2 well. It does not fit the original Super Tool at all.
I like it more than the Removable Bit Driver for the Kick/Blast/Fuse series. The UTA feels more solid to me, and I like the ability to set it to 45- or 90-degree positions as well.
Unfortunately, it didn't come with a case or sheath. However, I don't mind so much because it actually fits quite nicely into the front compartment of the Premium sheath that I keep my Wave in. I haven't quite worked out where I'll carry the bits.
A few pictures:





A couple of pictures of the UTA on my Wave:



And a picture of it in the sheath with my Wave:

Coming next, the Removable Bit Driver.
-
Removable Bit Driver - 2005
Acquisition: Purchased from eBay in January 2011.
This was my first foray into the realm of using 3d bits with my Leatherman tools. It's nice, but I prefer the Universal Tool Adapter so far.
It fits my Blast, but the result is a very long implement that, to me, feels like it might bend--possibly even bend the main tool--if much torque were applied. It holds bits pretty securely, but by snapping the bits into place and not with a magnet.
This came new in box with a sheath. The sheath is great. It has room for my bit kit (the two bit cards with flat bits for the flat bit driver), the Removable Bit Driver in its card, a pencil and a bit extender (not the Leatherman bit extender, but a regular 1/4" hex screwdriver extender that holds bits with magnetism rather than snapping them in). It also has a smallish front pocket that I'm not sure is intentional (it's created by the velcro closure) that is the right size to hold three long 1/4" hex bits: one for a large slotted bit, a large Phillips bit, and a bit for the security screws that are used in NES cartridges. There are a huge number of bits in this one pouch. I like it.
The card itself also has two spaces that are capable of holding 1/4" hex bits. In one, I keep a spare large slotted driver bit, and in the other, a 1/4" ratchet adapter. I don't really see myself in a situation where i'll need the ratchet adapter, have access to ratchet bits, and yet not a ratchet, but hey--what the heck, right?



-
I had a pretty good haul yesterday between a Craigslist transaction and a good pawn shop find. To sum it up, I got a fair-condition Kick, poor-condition Pulse, and excellent-condition PST-II for $35, and a brand-new Fuse for $15. Four tools for $50 - not too shabby for a day's hunting.
The Craigslist thing was a good find. I was initially the most excited about the Pulse, but less so once I saw the state it was in. It's pretty beaten up, but actually is functionally fine. The Kick is in good shape, but one of the screwdrivers needs reshaping. The PST-II, though--that's where I got most excited. It was listed just as a "Leatherman Tool" which a lot of people would call it since that's what it says on the handle. I assumed the listing referred to a PST, which I already have three of, but figured it's always nice to have another. I was delighted to find that it was a PST II, and in excellent shape. It has the newer style ("pivot-out") screwdrivers, but not the PST II logo. It was funny, as my girlfriend was with me at the time and looked them over as well. As we were walking away after I purchased them, she said "that's a PST-II, isn't it? Aren't they more valuable?" I've taught her well.
As for the Fuse, I found it at a pawn shop. They wanted $20, but I took a shot in the dark and managed to get it for $15.
Note: For some reason, there's some weird color stuff going on in my pictures, especially the PST-II and the Pulse.
Kick - October 2005
Acquisition: Purchased from a man off of Craigslist in February 2011. In fair condition, the only major defect being a chipped screwdriver tip, which should be easily fixed. Was very dirty but cleaned up nicely. Purchased alongside a Pulse and PST II for $35. No sheath was included with this tool.
Markings: The only marking other than Leatherman logos is "E1" stamped on the Phillips driver.
Notes: I believe this to be an unremarkable Kick, although any interesting markings have been noted. The thumbnail nick on the knife is on the outboard side.
I have also noted the lack of any sort of "USA" marking on any portion of the tool itself.



PST II - April/May 1998
Acquisition: Purchased from a man off of Craigslist in February 2011. In good condition. Purchased alongside a Kick and Pulse for $35. This tool came with a sheath that has a "BP" shield logo on it. It was a little dirty but has no damage and cleaned up very nicely.
Markings: This tool lacks the "REG TM" marking. The Phillips driver has "B" stamped on one side and "3" on the other. The Phillips driver is the "pivot out" (newer) style of driver, so it seems likely that whatever the symbols mean, the second one was picked up in the switch to the pivot-out drivers. The only other interesting marking is on the blade tang. It reads "LEATHERMAN USA" like most do, but the USA portion has dashes on either side ("-USA-") which is a trait I have not seen on any other Leatherman tool.





Pulse - July 2000
Acquisition: Purchased from a man off of Craigslist in February 2011. In poor condition. Seller said he thought it must have been run over by a car. Handles were loose but I was able to tighten them up. The plier jaws are a little loose but functional. Surprisingly, while the tool bears considerable cosmetic damage, the tools are actually all in good working condition. Purchased alongside a Kick and PST II for $35. No sheath was included with this tool. This tool has a "Khamsai Vue" logo on it. ("Khamsai Vue", as far as I can tell, is either the name of an Asian person to whom the tool may have previously belonged, or possibly a dry-cleaning service or contractor.)
Markings: This tool is the first Leatherman tool I have seen yet to have a Phillips driver with absoultely no marking on it or under the scale near it. In fact, save for Leatherman logos (on the scales, pliers, knife and file), the Khamsai Vue logo, and the date code, there are no markings on this tool whatsoever.
Notes: Like previously stated, this tool appears heavily damaged at first glance and is a bit loose. However, all of the tools and locks are completely functional.




Fuse - December 2010/January 2011
Acquisition: Purchased from a pawn shop in February 2011. This tool is practically brand new and shows no signs of use or wear. I was able to talk them down from the asking price of $20 to a mere $15. This tool did not have a sheath.
Markings: Phillips driver has a marking of "A1" on it, and a marking of "B3" on the scale beneath it. There is a marking of "4A" on the scale under the can opener. There is a marking of "I" under the scissors. "2A" under the knife, "B3" under the medium-size slotted driver, and "I" again near the lanyard ring. This tool has the most markings that I've seen. Whether the markings on the scales beneath the tools refer to the tools themselves, I don't know. Maybe it's reference for the assembly process?
Notes: This tool was purchased effectively brand new. How it made its way into a pawn shop so quickly after its manufacture (purchased Feb 5, 2011, and it has a date code of January 2011) is a mystery and a surprise to me, although I suppose it could have been an undesired gift or something like that.
This tool does have a defect, which may also be the reason that it found its way to a pawn shop so quickly. The "medium" sized slotted screwdriver is not tipped--that is, the tool is the full thickness all the way to the tip, and the taper down to screwdriver size was never ground into it, making it non-functional. This is the tool's sole imperfection, and it is otherwise perfect.
Also of interest, two of the scales on the Fuse have the same resting bumps found on the Zytel inserts of the Blast--despite the fact that the Fuse doesn't have a file or any other tool that utilizes them. This suggests that the Fuse and Blast use scales from the same stock.




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login