Vic Deluxe Tinker vs LM Juice CS4
-
Good job!I'll stick with the quality feel of the Vic. ;)
-
Enjoyed reading your review. Well done.

-
Nice comparison review.
Don't forget, too, that you can add a mini screwdriver to your Leatherman's corkscrew to add another tool without taking up additional space. 
-
Welcome to the forums,and thanks for a great review.

-
Thanks for the feedback guys
@Sazabi said:
Nice comparison review.
Don't forget, too, that you can add a mini screwdriver to your Leatherman's corkscrew to add another tool without taking up additional space. 
That's a fair point, but a moot point if it doesn't get carried/used. To be honest I keep picking it up, looking at it, and putting it back in favour of the Vic. I have considered doing some work to it to make it into the tool it should have been in the first place, but a few things concern me.
Sharpening the awl, modifying the can opener and dressing the scissor blades are relatively straight forward - however, fixing the saw/awl/scissor stowage issues could be a biggie. I think the scissors are catching on both sides (i.e. the slot it stows in is too narrow - incorrect spacing), and I reckon the saw is either bent or drilled out of square (possibly even ground "off-axis" to the hinge section).
I can't decide how to move forward on this - paying more than twice the cost of a vic for something less functional smarts a
bitlot. I'm not confident a return trip to LM would see the issues fixed ..... it needs a few coats of looking at I reckon.Anyone got any thoughts how to salvage this?
-
Oh wow! :D I pretty much like the CS4. :sak:

-
First off I loved the comparison/review.
It pretty much sums up my feelings about both tools. I've often wished it were possible for manufacturers to legally build the designs of others. I'd love to see a CS4 design made by Victorinox. Victorinox in general has amazing build quality but the designs aren't ideal for my usage. That's why I carry a Charge TTi.
Again, nice review.
-
My biggest issue with the Juice models has always been the can opener. To put it bluntly, it sucks. Come on LM, you can do better than that.
-
This Juice CS4 just gets WORSE!!!
I must start out by saying I haven't carried this tool yet due to the highlighted issues, all I've done is picked it up occasionally, fiddled with it, sighed, and put it back. The only work it's done is open a couple of beers when I left my SAK at work one day.
This evening after finding out I'd won Neil's givaway on SAK parts for modding (cheers feller
), I picked up the Juice to have another look over it and ponder if any of the SAK parts could be used to salvage this pathetic offering from a company I am growing to loathe more and more. I opened the scissors to again consider how best to remedy the stowage issue, and they've gone VERY floppy! These operated quite smoothly before, although gritty at the tip due to the badly ground micro serrations, but now after <u>NOT DOING ANY WORK</u> there is about 1/8" of play (rocking) at either end on the movable blade - almost as if the pivot has moved in one of the two halves.
**
Leatherman - if you're reading this - THIS IS A DISGRACE!!!! **Here's what you get for £70 folks ...
- An awl that doesn't even work
- A saw that doesn't stow away properly (very poor alignment)
- Uneven handles
- A can opener that doesn't even work
- Scissors that don't stow properly (wider than the slot they're supposed to fit in)
- Scissors whose hinge is so weak it is sprained cutting nothing but AIR
- Screwdriver bits that are stiff to open, then stab you in the back of your finger when they finally yield to your command
.... and I still haven't tested the corkscrew yet, but have read reports that it ain't that great, and the assist has chipped bottles.
This company is now PROUDLY moving into cheaper tools, hoping to encourage people to buy a full price tool later ... WHAT!! If this is the quality you get at this price ... what debacle awaits the poor unfortunates who buys cheaper versions? Sorry guy's but I can't accept that I've just just been unlucky here. Unlucky is getting a tool which has one, or maybe even two defects which slip through inspection ... this is not the case. I now believe my much hated GERBER SUSPENSION is better designed and better manufactured than this and cost less than half the price. In my opinion based on both my purchases Leatherman should either:
a) sell up to Victorinox/Wenger,
b) sell up to Spyderco, or
c) simply start designing tools that work, manufacturing them correctly, inspecting them correctly, and stop selling substandard productPersonally I'm in favour of options A & B

End of rant ... for now!!As always your mileage may vary, and I really REALLY hope it does!!
-
It's a shame your having so much trouble with your CS4. Over the years I've had various LM models and have not had any issues with QC what so ever. I currently own 2 Juice models, the S2 and the Pro. I agree that the can opener and awl are poorly designed and LM could have done better. I honestly think you got a lemon. Why don't you send it back to LM under warranty and have them send you a new one and if you feel that the QC still sucks you can always sell or trade it.
-
@EZ822 said:
It's a shame your having so much trouble with your CS4. Over the years I've had various LM models and have not had any issues with QC what so ever. I currently own 2 Juice models, the S2 and the Pro. I agree that the can opener and awl are poorly designed and LM could have done better. I honestly think you got a lemon. Why don't you send it back to LM under warranty and have them send you a new one and if you feel that the QC still sucks you can always sell or trade it.OK, a good sleep and a couple of fried egg butties later, and I've decided to email LM for their comments.
I'm not prepared to start spending further cash on P&P etc to risk being further disappointed until I've heard what they have to say for themselves and their products. I am going to point out that I actually want to like, trust, and be inspired by their products. I'm going to tell them how the Juice line in my opinion could have been the epitome of pocket tools. I'm also going to be clear and level headed about my feelings with what I have actually experienced so far.
I'll keep you guys informed

-
very cool comparison
i do like the look of the not tested here wenger grip, one on my ever growing list , -
@Zed said:
very cool comparison
i do like the look of the not tested here wenger grip, one on my ever growing list ,Thanks Zed

I'm pretty sure there are reviews of the wengergrip here somewhere ... possibly in the main MTO pages or on the wiki. I fell lucky and grabbed the last one from Heinnie, but they do pop up here on the trade section from time to time. I've got the pocketgrip too now (thanks donvito) but the bigger brother wins out for me so far.
-
Nice review. I caught something interesting, about you favoring the Wenger can opener design over the Vic design. This is interesting, since I have read about a lot of people who find the Vic setup to be the best. I have used my Vic can openers and though they work very well, I usually just break out a Swing-A-Way! I need to put my Wenger can opener to the test today, to see how it compares. I actually like the Wenger can opener design as it sort of works as a rough blade for random tearing/cutting duty. If I am going to cut open a tapped box, I always use the Wenger can opener, so as not to gunk up and dull my main blade. I actually started using the awl's on my Vics for this same purpose. Considering how useless the medium screwdriver is on that same tool, you may have a point of Vic just ditching that tool. Hell why not skip them both and use the combo-tool. I find that tools bottle opener is superior to the standard bottle opener, and the screwdriver works comparable to the large screwdriver. The only loss would be the can opener function. Since I rarely need it, I would be fine.
-
@Aloxfan said:
Nice review. I caught something interesting, about you favoring the Wenger can opener design over the Vic design. This is interesting, since I have read about a lot of people who find the Vic setup to be the best. I have used my Vic can openers and though they work very well, I usually just break out a Swing-A-Way! I need to put my Wenger can opener to the test today, to see how it compares. I actually like the Wenger can opener design as it sort of works as a rough blade for random tearing/cutting duty. If I am going to cut open a tapped box, I always use the Wenger can opener, so as not to gunk up and dull my main blade. I actually started using the awl's on my Vics for this same purpose. Considering how useless the medium screwdriver is on that same tool, you may have a point of Vic just ditching that tool. Hell why not skip them both and use the combo-tool. I find that tools bottle opener is superior to the standard bottle opener, and the screwdriver works comparable to the large screwdriver. The only loss would be the can opener function. Since I rarely need it, I would be fine.Cheers mate

I'm with you on the "scoring" potential of the wenger style, and as for pitching one opener against another, it was interesting to see the LM making a neater job (once the Vic had got it started). Another member did a head to head between three openers recently, and the Vic came first, and the Wenger last ... maybe style / technique come into it
To me the Wenger just looks and feels like a can opener should, plus has the ability to score through tape and be a general purpose pokey thing. While I've not timed myself with the two different brands - I'm pretty sure I'd do just as well with the Wenger ... based on my pics in this thread I couldn't do much worse with the Vic :DI've not tried the combo tool to be honest (only discovered there is one earlier today :-[), but I certainly want to try one out. Bottle opening is far more frequent than can opening (for me anyway), and I'm surprised we don't see more of the combi
-
@50ft-trad said:
OK, a good sleep and a couple of fried egg butties later, and I've decided to email LM for their comments.I'm not prepared to start spending further cash on P&P etc to risk being further disappointed until I've heard what they have to say for themselves and their products. I am going to point out that I actually want to like, trust, and be inspired by their products. I'm going to tell them how the Juice line in my opinion could have been the epitome of pocket tools. I'm also going to be clear and level headed about my feelings with what I have actually experienced so far.
I'll keep you guys informed

Hi, I'm in the market for a Juice CS4 and the follow up posts you made really bug me. I read your review a wile ago on that "other forum" but the problem with the scissors is a big one for me. Did you get any reply from Leatherman. They always did right by me.
As for Vic or Wenger buying of Leatherman. I always suspected Leatherman to have some sort of partnership with Wenger. Leatherman uses some of Wengers designs like the spring for the scissors or the can opener (wave, surge,...). Maybe a merger :) I'd prefer the steel of the SAKs on my Leathermans.
-
@50ft-trad said:
OK, a good sleep and a couple of fried egg butties later, and I've decided to email LM for their comments.I'm not prepared to start spending further cash on P&P etc to risk being further disappointed until I've heard what they have to say for themselves and their products. I am going to point out that I actually want to like, trust, and be inspired by their products. I'm going to tell them how the Juice line in my opinion could have been the epitome of pocket tools. I'm also going to be clear and level headed about my feelings with what I have actually experienced so far.
I'll keep you guys informed

Hi, I'm in the market for a Juice CS4 and the follow up posts you made really bug me. I read your review a wile ago on that "other forum" but the problem with the scissors is a big one for me. Did you get any reply from Leatherman. They always did right by me.
As for Vic or Wenger buying of Leatherman. I always suspected Leatherman to have some sort of partnership with Wenger. Leatherman uses some of Wengers designs like the spring for the scissors or the can opener (wave, surge,...). Maybe a merger :) I'd prefer the steel of the SAKs on my Leathermans.
What can I say
- I didnt follow it through :-\I came to the conclusion that manufacturing issues aside, I didn't like the design of some of the tools - so it's pending modification. When I get some free time I'll have a pop at making it how I want it - getting a well made one would only address some of the issues IMHO, so it needs some thought and cross-breeding with other tools. It's a crying shame there aren't more options at this size for pliers based tools.
C'mon Victorinox - there's an opportunity here for ya

-
I was really wanting to buy a Juice too but after reading this im not sure, your review has me worried. It sucks because its just another thing i would really like to get but im not going to be happy with junk quality you can find on chinese made tools. Its just really frustrating when a product is ment to be good quality, made in USA etc and you end up getting bad product. Cant manufacturures understand that 99% of people into multi tools or knives etc just want something good quality and are prepared to pay a little extra $ to get a good product. We dont want to see manufacturing moved off shore or the quality lowered to make the tool 'cheaper'. There was a time when i bought a lot of cheaper tools, torches and things and the damn things just do not last at all and are just rubbish quality. I got sick of it I said enough is enough and after much shopping around i bought a Fluke multi meter valued at $800 AUD (although i sourced it much cheaper in USA) as i wanted something that was good quality and going to last rather than a cheap $25 one. So far i have been nothing but very impressed with all the Victorinox SAKs i have. They are not 100% perfect, but they are very, very good, you can hardly complain. All other manufacturers should take a good hard look at what Victorinox does.
I think you should of complained to Leatherman because otherwise they will think they can just keep selling this sort of quality to people and think 'well no ones complained so far, we must be doing everything alright'
-
It's true that some Juices have these issues, my Xe6 has exactly the same issues with the saw as 50ft had here for example, but it should also be noted that neither of mine have any issues with the scissors. In fact they're both rather good. Certainly it'd be unfair to compare either of them to some junk Chinese MT, they're much better than that.
-
@Cyclone82 said:
I think you should of complained to Leatherman because otherwise they will think they can just keep selling this sort of quality to people and think 'well no ones complained so far, we must be doing everything alright'I suspect for many users, the tool would actually be acceptable. I was expecting quality of Victorinox standard, and far superior design. In my opinion, these fall well short on both counts, but many folks seem happy with their Juices despite a great many having the same weaknesses. My findings are that many of the issues I've highlighted are typical for the Juice line, but people (such as Gareth) still find them go be worthwhile purchases. I like the pliers, i like the size, and i like the external access - however I PERSONALLY find the design and quality of the accompanying tools to be poor. LM's QA dept, and design dept have decided these are fit for market, and many users agree. I'll not complain, I'll just spend my money elsewhere on makers whose products I'm happier with. I'd love have a Juice I am happy with, but do not believe LM can deliver that, so I'll have to try and achieve that myself. However based on how people like these tools despite their issues, I now feel I cannot justify buying any of LM's higher end tools. Yes, other folks rave about them too - but if folks actually like these Juices, then maybe people have different expectations to me - and I'm not going to pay double (or more) market price for a tool which is not two or three times as good as the alternatives. If this is a measure of what LM offer, and most users like them, then good luck to them - but I'll be shopping elsewhere.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login