Hand tools in the US.
-
@Pacu said:
I've busted a knuckle or two on wrecked half inch Craftsman ratchets. When i took them back to Sears for replacement i got alot of negative attitude from the tool clerks. (2 different occasions at 2 different Sears).My snap-on ratchets still going...for me the extra price is worth it. I mix and match though..some stuff is better than others in tools. Klein screwdrivers beat all, Knipex cutters are better than craftsman, craftman sockets are the best value, Husky and Kobalt have nice handtools too.
For a time period, I had the EXACT same experience at Sears. I stopped buying Craftsman tools for a while. Sears contacted me at one point after I sent a nasty email to them about their "Lifetime" warranty.
I let them have it. I told them that I was buying Husky and Ridgid brand tools for non-critical purposes. I was done with craftsman.
Then, a year and a half ago, I was in Sears replacing broken screwdrivers, I brought a broken socket handle with me, expecting a big hassle.
They didn't have the socket handle in stock,so they replaced it with the smallest socket set with the same handle. Clearly they heard the same from a LOT of former Craftsman owners.
-
at flea markets and garage sales i buy old craftsman sockets and tools..seem better built than what's on the shelves now. Sockets seem thicker heftier back then. I got a good vintage 3/8 collection of deep sockets going. :D
-
I do agree with most on here. I love my snap on tools. The boxed end of the wrenches have a thin wall that gets in tight spots. Crafstman wrenches have a thicker wall and weaker steel. I have bent the steel on opened end wrenches the very first time I used them. I too gave up on crafstman. They are the tools that stay out in the garage while my snap on ect... stay locked inside. I have some mac but the chrome plating chipped off. For a more affordable tool I really like Proto. I think mac tools own them. They have the thin walls like snap on and they are very strong. Two other names worth mention are SK and Matco, both great tools.
-
I'm not sure Craftsman is getting enough love here. I see a few folks commenting on them then moving on to something else. I have been using a lot of Craftsman tools for some time now and I am happy as anything with them. I have screwdrivers, sockets, wrenches etc and I think they are great. I don't think you can beat them. Yes, I agree that Snap On and Mac may be a little bit nicer and higher quality, but I don't think the increase in price is justified by the increase in quality. It's the difference of having a car that does 150mph and one that does 152mph- chances are you'll never have the opportunity to test it at that level, and in the off chance you do, the difference is negligeable.
Plus, there is no hesitation when it comes to replacing Craftsman tools. I got a bunch of broken tools from someone a while back- he saved up all his broken tools to return at once rather than replacing them as they broke, and they were obviously abused. Still, when I walked into Sears and dropped all these second hand, abused tools on the counter, the sales guy ran around picking out replacements, printed off a reciept as a record for the transaction and sent me on my way. It couldn't have been easier.
Def
-
@Grant Lamontagne said:
I'm not sure Craftsman is getting enough love here. I see a few folks commenting on them then moving on to something else. I have been using a lot of Craftsman tools for some time now and I am happy as anything with them. I have screwdrivers, sockets, wrenches etc and I think they are great. I don't think you can beat them. Yes, I agree that Snap On and Mac may be a little bit nicer and higher quality, but I don't think the increase in price is justified by the increase in quality. It's the difference of having a car that does 150mph and one that does 152mph- chances are you'll never have the opportunity to test it at that level, and in the off chance you do, the difference is negligeable.Plus, there is no hesitation when it comes to replacing Craftsman tools. I got a bunch of broken tools from someone a while back- he saved up all his broken tools to return at once rather than replacing them as they broke, and they were obviously abused. Still, when I walked into Sears and dropped all these second hand, abused tools on the counter, the sales guy ran around picking out replacements, printed off a reciept as a record for the transaction and sent me on my way. It couldn't have been easier.
Def
Yes. As I said, in the last year or two, Sears seems to have reversed course and are honoring the Craftsman warranty like they used to.
However, for critical tools (I'm thinking my torque wrenches), The SnapOn's are just better. As in WAY better. (As someone mentioned, the SnapOn sockets and closed ring wrenches are thinner walled and stronger too--but again, for MOST applications, the Craftsman tools are just fine)
-
snap-on ratchets > craftsman ratchets imo


that craftsman is my 3rd one...plastic tab on the back keeps breaking

-
I have Snap On stuff that has seen heavy industrial use since the eighties , a couple of the pieces were bought used , they are still in very good condition . Lots of luck getting that kind of service from Craftsman ( OK tools for amateurs ) . Hazet of Germany make some lines as good as Snap On , ditto Gedore - I mention these in passing , as they might be easier to find in the old world .
Chris
-
I'm not a mechanic, but I like hand tools. Usually they are quite small, like one might use for electronics work and such.
I use Craftsman for my large toolset, it a few decades old now, sockets wrenches and stuff. Really I could not afford SnapOn or I probably would have bought a few items like ratchets there.
I do own some SnapOn mini-cutters, mini-pliers, and things. At the time there were the best tools I could find by far so I got them. My Craftsman tools are on the larger side and I don't really need them anymore. I have a set of Craftsman screwdrivers that have served me well, but there are much better systems like Xcelite and some German makers that make my Craftsman set look primative. I will say screwdrivers sound simple, but if you need to use them a lot, quality can make a huge difference. A quality tool is always a joy to use, so anything that's used frequently should be the best quality. Finding the best "value" (quality vs. price) can be very difficult without extended use.
Since the buyer is in Norway I'm not sure the warranty is too important since he'll have a heck of a time replacing them no matter what.
I would not hesitate to recommend Craftsman for sockets and wrenches, it does not sound like his applications are going to be really high torque you might find in mechanics or industrial machinery.
Now if OP could find some used SnapOn tools, that would be ideal, shipping to Norway is not going to be cheap, so I'm not sure how that affects the value poposition of buying from the US.
-
Mostly I use Teng Tools, they are Scandinavian IIRC. That should make them perhaps more easy (read: cheaper) for Medic to buy. My experience is excellent with that brand. Maybe not as smooth and slick to look at but functional for sure. Good waranty as well so I'm told. Luckily I've never had to find out my self ;)
The second brand I have are Beta tools, looks a bit smoother if that's important. And great stuff and good waranty as well. And it is made in the old world as well so maybe less expensive for you.
Good luck with finding the right tools

-
Snap-On and other high quality tools that you are familiar with in the states are no problem in getting hold of in Norway, they just cost 2-3 times more in Norway than in the US so if the shipping runs up to 40-50 $ I will still save lots of money. ICanFixThat is right, I won’t be doing high torque jobs so my demands for über good quality is not there.
I have found some wrench and socket wrench sets from Teng for an OK price but they are still more expensive than the sett’s from Craftsman I have seen and as far as I know the quality is the same. It’s looking like I am going to go with Craftsman tools since they have nice price, the quality seams good and I want to try them before going with Snap-On or Mac.
-
Maybe you should check for Stahlwille tools, German made and easy to find in Europe.
-
I like my craftsman tools, dont get me wrong. But I work on my cars often and my snap-ons feel better to me. All of the maint. men at my work that repair the machines every day, all use proto. I think the cost for proto wrenches is way less than snap-on but more than craftsman. For average use and value, crafstman would be a good choice. If you do alot of work on cars , tractors, machines, ect... You may want to use something better. Not to say that craftsman wont work in those cases because I have used craftsman in all of those cases and they worked just fine. I still use them and have had them for years. The others just fit and feel better to me.

-
I know what you mean, but I don’t work on cars like a mechanic does and I won’t have use for tools that have high torque tolerance like Snap-On and other high quality tools have.
-
@sparky415 said:
Another one for the good toolmakers list is Teng for sockets etc (only by reputation I've never played with any)Some other makes that I have just thought of are Bahco and wiha
Both make good quality tools
-
Another one for the good toolmakers list is Teng for sockets etc (only by reputation I've never played with any)
Some other makes that I have just thought of are Bahco and wiha
Both make good quality tools
I have used Bahco tools and they are very good.
-
another vote for bahco
-
bahco is great....i think snap on owns some of it somehow. I know my ace hardware ratchet is bahco rebrand.
Some Husky tools are JH Williams/Stanley rebrand i believe. Great ratchets and sockets there.
Cresent tools are well made too. Not a big fan of Greenlee electrician tools. Klein fishtapes suck..always binding up.
The newer Kennedy toolboxes are a shadow of their former self. Waterloo is still decent. Craftsman toolboxes are waterloos. I really want that rally box for my multi collection.
-
@Pacu said:
bahco is great....i think snap on owns some of it somehow. I know my ace hardware ratchet is bahco rebrand.Some Husky tools are JH Williams/Stanley rebrand i believe. Great ratchets and sockets there.
Cresent tools are well made too. **Not a big fan of Greenlee electrician tools. Klein fishtapes suck..always binding up.
**
The newer Kennedy toolboxes are a shadow of their former self. Waterloo is still decent. Craftsman toolboxes are waterloos. I really want that rally box for my multi collection.I'm so glad you posted that. I thought that somehow I was too inept to use it correctly. Just a PITA to pull back into the carrier.
-
I'm a diehard Kline fanboy but don't use their tapes either , Greenlee hand tools ( with the exception of the KO punches ), seem pretty lethargic .
Chris
-
@Styerman said:
For pliers and such , I'm a big fan of Kline tools . Knipex from Germany is also very good .Chris
+1.
Wiha makes some good stuff as well.
I also agree with the comments that Snap-On and MAC are a step above Craftsman. Almost all of my tools, however are Craftsman due to the lower cost and lifetime warranty. I got tired of breaking by 1/4" ratchet, so now all of my ratchets are MAC or Snap-On.
I would think the long-term value of Craftsman tools for you would depend on how easily you could return them for warranty replacement if needed.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login