Hand tools in the US.
-
Mostly I use Teng Tools, they are Scandinavian IIRC. That should make them perhaps more easy (read: cheaper) for Medic to buy. My experience is excellent with that brand. Maybe not as smooth and slick to look at but functional for sure. Good waranty as well so I'm told. Luckily I've never had to find out my self ;)
The second brand I have are Beta tools, looks a bit smoother if that's important. And great stuff and good waranty as well. And it is made in the old world as well so maybe less expensive for you.
Good luck with finding the right tools

-
Snap-On and other high quality tools that you are familiar with in the states are no problem in getting hold of in Norway, they just cost 2-3 times more in Norway than in the US so if the shipping runs up to 40-50 $ I will still save lots of money. ICanFixThat is right, I won’t be doing high torque jobs so my demands for über good quality is not there.
I have found some wrench and socket wrench sets from Teng for an OK price but they are still more expensive than the sett’s from Craftsman I have seen and as far as I know the quality is the same. It’s looking like I am going to go with Craftsman tools since they have nice price, the quality seams good and I want to try them before going with Snap-On or Mac.
-
Maybe you should check for Stahlwille tools, German made and easy to find in Europe.
-
I like my craftsman tools, dont get me wrong. But I work on my cars often and my snap-ons feel better to me. All of the maint. men at my work that repair the machines every day, all use proto. I think the cost for proto wrenches is way less than snap-on but more than craftsman. For average use and value, crafstman would be a good choice. If you do alot of work on cars , tractors, machines, ect... You may want to use something better. Not to say that craftsman wont work in those cases because I have used craftsman in all of those cases and they worked just fine. I still use them and have had them for years. The others just fit and feel better to me.

-
I know what you mean, but I don’t work on cars like a mechanic does and I won’t have use for tools that have high torque tolerance like Snap-On and other high quality tools have.
-
@sparky415 said:
Another one for the good toolmakers list is Teng for sockets etc (only by reputation I've never played with any)Some other makes that I have just thought of are Bahco and wiha
Both make good quality tools
-
Another one for the good toolmakers list is Teng for sockets etc (only by reputation I've never played with any)
Some other makes that I have just thought of are Bahco and wiha
Both make good quality tools
I have used Bahco tools and they are very good.
-
another vote for bahco
-
bahco is great....i think snap on owns some of it somehow. I know my ace hardware ratchet is bahco rebrand.
Some Husky tools are JH Williams/Stanley rebrand i believe. Great ratchets and sockets there.
Cresent tools are well made too. Not a big fan of Greenlee electrician tools. Klein fishtapes suck..always binding up.
The newer Kennedy toolboxes are a shadow of their former self. Waterloo is still decent. Craftsman toolboxes are waterloos. I really want that rally box for my multi collection.
-
@Pacu said:
bahco is great....i think snap on owns some of it somehow. I know my ace hardware ratchet is bahco rebrand.Some Husky tools are JH Williams/Stanley rebrand i believe. Great ratchets and sockets there.
Cresent tools are well made too. **Not a big fan of Greenlee electrician tools. Klein fishtapes suck..always binding up.
**
The newer Kennedy toolboxes are a shadow of their former self. Waterloo is still decent. Craftsman toolboxes are waterloos. I really want that rally box for my multi collection.I'm so glad you posted that. I thought that somehow I was too inept to use it correctly. Just a PITA to pull back into the carrier.
-
I'm a diehard Kline fanboy but don't use their tapes either , Greenlee hand tools ( with the exception of the KO punches ), seem pretty lethargic .
Chris
-
@Styerman said:
For pliers and such , I'm a big fan of Kline tools . Knipex from Germany is also very good .Chris
+1.
Wiha makes some good stuff as well.
I also agree with the comments that Snap-On and MAC are a step above Craftsman. Almost all of my tools, however are Craftsman due to the lower cost and lifetime warranty. I got tired of breaking by 1/4" ratchet, so now all of my ratchets are MAC or Snap-On.
I would think the long-term value of Craftsman tools for you would depend on how easily you could return them for warranty replacement if needed.
-
I think most of my work box is currently Klein, with a fair amount of Channellock, Husky, Crescent and more. I'm not particularly loyal (altho I do have a soft spot for Klein as I do a lot of electrical work). Really I just try to buy the best tool for the job from whoever makes it best.
-
What about Kobalt? Some of there stuff seems pretty good.
-
@gafftapegreenia said:
I think most of my work box is currently Klein, with a fair amount of Channellock, Husky, Crescent and more. I'm not particularly loyal (altho I do have a soft spot for Klein as I do a lot of electrical work). Really I just try to buy the best tool for the job from whoever makes it best.i'm a diehard Klein fan. Their tools are extremely well made ( except for their fishtapes ) :D
-
got one of these on the way now - perfect for the job im doing on friday :)

-
@ducttapetech said:
What about Kobalt? Some of there stuff seems pretty good.IME Kobalt is on par with Craftsman. If Lowes is closer than Sears, I'd go with Kobalt.
-
In Australia a lot of guys including myself use Sidchrome. http://www.sidchrome.com.au You can search on Google or www.ebay.com.au for 'Sidchrome' It is sort of our version of Snap On in USA
-
I'm looking for a 1/4" ratchet at the moment. I have looked at the worshiped snap-on tools but the ratchet head seems huge for a 1/4" ratchet :ahhh Any thoughts on that?
-
Whats the part number for it? I have a printed version of the Snap on catalogue with dimensions.
Snap on make several types of ratchets also. There is one with a quick release button that releases the socket and anotther version that has more gear teeth than normal plus they have different handle types and angled heads etc.
They also do a 'Blue Point' series which are cheaper more affordable versions with manufacturing from outside USAI want to get this
3/8
I already have the quick release one but it doesn't accept the comfort handle so i want to get the comfort handle version but that one is not quick release though.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login