Bye bye Gerber!
-
@Grant Lamontagne said:
Thanks Gareth- I knew there was something else I was forgetting! :DDef
Actually the credit goes to Roadie for pointing it out in another thread not too long ago. :D
-
I like Gerbers. They are my second highest metal count after Leatherman in numbers.
-
No manufacturer gets it all right all the time. In general the multitool Gerber lineup doesn't do much for me but there are still some that I would like to try out like the Grappler and the Octane.
-
I cant even believe I am going to Gerbers defence. But to play devils advocate... You can still get some decent gerber stuff. Most of the new stuff is kinda junky but really think about it.
You can allways buy a.......... or you can ..........
Aww forget it I got nothing.
But remember there is great old tools still out there. Just trade for the old stuff and leave the new stuff alone if ya wnat.
-
anyone think the diesel is up to snuff? I haven't played with one yet...but if its like the 400/600 id buy that for a dollar. :D
-
@Pacu said:
anyone think the diesel is up to snuff? I haven't played with one yet...but if its like the 400/600 id buy that for a dollar. :DI've only played with one for a few minutes but initial impressions were OK. My friend, who owns it, swears it's better than any other MT out there, thought I think that's going a bit far IMO. :D Myself I'd say it's not got a great leg up on the MP600, but if I found one for a good price I'd certainly think about it.
-
There is still some good stuff but the octane is too thin in the liner lock
-
It's true they innovate with things like the replaceable carbide cutters and blade exchanger ect. no denying that, but the quality of these last imported tools I bought was just horrible. No Leatherman, SOG, or Vic I ever bought has been anywhere near that junky. I mean you can argue about the features you like or hate on this Leatherman or that SOG ect. but I would grab any smaller tool from those makers, like say a Skeletool, Kick, or SOG PPP, or Vic Spirit and not be afraid to deploy the blade and cut up a larger cardboard box, something I do often at my job. But I would be afraid to do that with the Crucial FAST or Octane, as I just don't think the blades would take it, especially the Octane, as the little nubbin the back of the blade bears against when you cut is very small and weak compared to how the blade locks up on the competing tools I mentioned. The Octane's internal tools and pliers were not bad (except the anvil wire cutters which totally suck). It had the potential to be a great tool. Too bad they couldn't integrate the blade inside the tool like on a 400 or 600 so it would lock up solidly. And yes, Leatherman seems to be taking cosmetic cues from Gerber with their new tools coming out this fall, I just hope they don't also copy Gerber's imported tool construction quality. :P
-
I'm solidly of the opinion that Gerber has great designers. Unfortunately somewhere between the designers and the consumers stands the accountant.
-
-
I still have some hope that they will be getting better in the future, but I am willing to bet that no.
Shame to. Some of the stuff looks good, but unfortunatly they just seem to junk it up in construction. However we all know accountants jsut care about the bottom line, and it seems the rest of them there see it the same way. Profit over quality.
-
My old multiplier was great. Solid, well built, and clever.
My Pro Scout was the same.
So I figured a Diesel would be wonderful. Boy was I wrong. The blade tip broke off when I cut a small zip tie.. The Phillips driver stripped out the first time I used it.. It also just plain felt cheaper than my old Gerbers that I loved.
I'd carried a ST200 in between the Pro Scout and Diesel. It was an undeniable step up in quality, if not a step back in clever design.
I wound up modding it into a Diesel/Scout combo out of parts from each (my scout was trashed anyway). Even that was not enough to keep the ST200 off my belt. It just felt solid and I knew it was tough.
I'm not done with Gerber. I carry my EAB every day as a money clip and just love it. But I won't buy another MT from them. Not without some serious persuading via reviews. I rarely even stop in here, so low is my interest in Gerber.
I used to champion them back when I had my first two. Now? The opposite.
Hear that Gerber? You lost a vocal fan and turned him into a vocal opponent.
Quality. That is the final word for me. Gerber is not a name associated with quality. You take a chance anytime you buy something with their name on it.
The EAB is exceptional. But even it had to be recalled at first. Too bad.
-
i just bought the splice, i didnt pick up the vise becouse from the box it looked like sh*t plus there was noise coming out of it,the pliers didnt match that mean one side was bigger than the other , the finish looked like it was meant to be "made in china" there were sharp edges all around
now i took the splice just because i sayed i wanted to try a gerber
i have the spice for one day now and you can notice the deference between it and the leatherman its like the difference between toyota civic (the old ones) and a new bmw 3 :S
i heard something that cheered me up a bit that i can return the splice add money and get a beter gerber that mean they will give me back 100% of the product's price so i can buy a new one
although its not that good the fact that i can get a better gerber in the future make it not suck as bad:S -
I've got my first "proper" Gerber coming soon, a 600 DET. I'm interested to see what the quality is going to be like on this. To be honest the plier heads are not in keeping with what I need from a tool, and am thinking about swapping them out for the shears from a Paul Chen Multitasker - I think the mix of those big shears with the rest of the toolset should make for a very interesting combo
-
I've not owned either the Splice or Vice but I do remember picking one up and not being impressed. :-\ Gerber do seem to have such wide variation in what they see as acceptable; From the abysmal Suspension (that I wouldn't touch with 50ft's boat poll) through to the nicely designed and decent quality MP400 and 600 etc.
-
Gerber produced the Radius to prove a point...that they could make a Gerber Suspension look good in comparison.

-
-
-
@Gareth said:
I've not owned either the Splice or Vice but I do remember picking one up and not being impressed. :-\ Gerber do seem to have such wide variation in what they see as acceptable; From the abysmal Suspension (that I wouldn't touch with 50ft's boat poll) through to the nicely designed and decent quality MP400 and 600 etc.
I actually bought my Suspension for use at the boat - I was young and naive back then :PIt's good to hear someone still praising the 400 & 600 (seen as I have one coming) despite their apparently continual descent into poor quality. It's wierd really. Such good designs and poor quality - it's like they're making cheap knockoffs of THEIR OWN GEAR. If only they'd look at producing a PRO range of each of their designs. Standard cheapo model at Joe Bloggs friendly prices, and a superior properly made version for those who expect more from a tool
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

(unfortunately) :-\