Show your slip joint's thread!
-
powernoodle,
Nice collection you got going there, you got good taste in slippies!

2xTap
-
Case sodbusters are classics, the larger ones especially feel like tanks. I must get a yellow one, one day. -
Whenever I see a little Butterbean I think "powernoodle" just like whenever I see a big ol' Gunboat I think "2xTap". I dig those Old Timers, too.

-
I wouldn't mind getting one of the carl schliepper sodbusters, they come in backlocking as well as slipjoint varieties and lots of scale variations.
-
Got a couple more the other day to add to the collection. These two being #75 Large Stockman's from Case.
This first one is of very recent production and part of Case's Walnut Bone Silverscript Series......


It's a #75 pattern Large Stockman at 4 1/4" closed and is of 2011 production. It sports polished Tru-Sharp Stainless blades, brass liners and pins, nickle/silver bolsters and Silverscript shield. Scales are Walnut Jigged Bone.....

The knife is virtually flawless sans one small area. Along the backspring area there is a gap about a inch and half long running between the main blade's backspring and spacer....

It affects nothing but is noticeable. Aside from that the blades have zero play, no other gaps anywhere, blade edges are clean and sharp, and backsprings have a good stoutness to them.
Now this next one is a #75 pattern Large Stockman as well, but of much older stock.......


This one is of 2000 production and was part of Case's "Millenium" series. It is a serialized piece and has Case's unique CASE MM shield and tang stamp.......


It is 4 1/4" closed with polished Tru-Sharp stainless blades, brass liners and pins, nickle/silver bolsters and shield, and the scales are done in Jigged Old Red Bone. This is a unused mint piece but came from a collection without any box or paperwork.
The fit and finish is excellent with good stout backsprings, zero blade play throughout, clean even edges that are quite sharp, and a virtually gap free fit. Although there are some very short, tiny gaps between backsprings at both ends of the knife.......

Barely noticeable and don't affect anything. Otherwise a nice and very clean knife that's over a decade old.
2xTap

-
Honestly 2xTap, every time you post I end up looking at buying another traditional slippy. ::) Thanks for sharing mate. :)
-
-
@Gareth said:
Honestly 2xTap, every time you post I end up looking at buying another traditional slippy. ::) Thanks for sharing mate. :)Well, that's a good thing. You can never have too many slippies. ;)
@NutSAK said:
Yeah, I just bought two Queen slipjoints yesterday after looking at this thread. These will be the first I've ever bought. I hope I can control myself!Really, your first Queens! So what did you get......enquiring minds want to know?

2xTap
-
I bought a #40 ACSB Gunstock and a #51 BEM Dogleg Jack.
The pictures you've posted of your #40's had me
In the meantime I saw the #51 for a good price, and I like the clip/pen combo, so I picked that up too. ::) I started out trying to be a good boy and just buy a Queen City #40 delrin/1095 and black wood/1095 copperhead, as these will be users. However, I waited too long and can't find them in stock anywhere now.What I meant above was that these will be the first traditional slipjoints of any make that I've ever bought. I've had a few handed down to me in the past, but I've always carried SAKs. Now that I tend to carry a plier MT most of the time and use a knife mostly just for cutting duties, I'm thinking I'd like a little US-made craftsmanship in my pocket. I'm pretty excited about getting these, but I hope it doesn't turn into a habit. ;) Looking back through all of the pics in this thread, I've already formed a preference for Queen, and I like the company's history.
-
Well I've just ordered a Rough Rider Whittler in orange bone. ::) It's all your fault 2xtap. >:(
:D

My own pics after it arrives. :)
-
NutSAK,
The first traditional slippies you ever bought! :o
Man, have you been missing out. Well I hope when your Queens arrive you become a fan of them. There is just something about these classic styles and design that can really get you and pull you in. And if nothing else I'm pretty sure the ACSB on that Gunstock just might do it by itself.
And if you like Dogleg Jacks you should see some of the new ones coming from Great Eastern, these are really sweet.......
They are also making them in a barehead version with a Spear Point master......
They are also making a slightly larger version in their Dogleg Trapper Jack.........
.jpg)
Gareth,
For the money it's hard to beat a Rough Rider. I look forward to hearing your thoughts on that Whittler when you get it.

2xTap
-
@2xTap said:
They are also making a slightly larger version in their Dogleg Trapper Jack..........jpg)
I like the appearance of the doglegs built on the trapper frames, such as Queen does and that one above. With the swell of the handles on the other two, I bet they would fit nicely in the hand though. They're all very nice, but don't go talking me into GEC before I get my Queens!
-
NutSAK,
Speaking of #40 pattern Gunstocks, just ordered myself another one...........

...........in Curly Zebra Wood.

2xTap
-
very nice!

That looks like a collectorknives.net picture. That's where I got my ACSB.
I've had my eye on a Case Harvest Orange Pocket Worn Canoe today. :ahhh
-
Ooh, that Dogleg in snakewood is lovely... now I've found myself at the GEC site again :D
-
These arrived last week.
The main reason I got them was that I did not have them, or anything similar.The Rough Rider, apart from the expected embarrassing shape (I wonder if anybody actually uses these type of knives regularly..) was fine; smooth and sharp. I suspect the shoe part could be used as a bottle opener, but I have not tried it yet.
The EKA sweede 8, handle appeared to be made from the same plastic they used to make telephone handles in the eighties and came with an off-centred blade and loads of side to side play.
The play was corrected very easily, and it was a breath of fresh air to see a company use “normal head” screws for adjusting the blade (ok, Svord does it too). It makes you wonder why most companies make the adjusting and taking apart of their knives so complicated.
The blade itself was fine, made with Sandvic stainless steel and did not have any problems. -
NutSAK,
Yeah, I got it from Collectorknives.net........I've bought alot of knives from him over the years. Most of my GEC collection has come from him, as well as alot of Queens and S&M's, some Case, Henckels, and a slew of others. He's one of my preferred dealers. Plus, his shipping is fast and he's a great guy too.
Nuphoria,
I tell this to everyone......if you don't own a GEC yet, you need to get one. They build the finest quality production slipjoints out there. Not to take anything away from Queen or Case, or some others, but there is a bit more to the GEC's. If you are eyeing one, get it! Trust me, you won't be disappointed.
Although I will say many of their patterns aren't for the "weak nailed".......GEC puts some heavy backsprings into alot of their patterns.
dks,
Can't say as I know anyone who uses a Lady Leg regularly. Don't know many people who own them. I know there is a collector market for them and over the years there have been many makers who have made the pattern in one form or another. The pattern has been around for a while.
2xTap
-
I bought my first Case today--a 1970 Redbone Barlow. The scales are a little beat up, but I think she's got some good character and the blades are in great shape w/very little discoloration. I probably paid a little more than I should have, but it called to me. I think I'm developing a nasty habit! :ahhh
These are the seller's pics, I'll take some better ones when it arrives:
-
NutSAK,
Nice pick up bud. Good old pattern in Sawcut bone. It does look to be in very good condition for it's age, especially since it has CV blades. Fairly light pepper on them, not bad at all.
2xTap
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login