Show your slip joint's thread!
-
Ok, so others can see them.
dks, it might be something with your set-up that is blocking the pics. Possibly your service provider.
2xTap
-
Here's another I just got recently. This one a new release by Kissing Crane.........


A Scout pattern done in the standard 4-blade configuration. Closed length is 3 3/4" with 420 stainless steel mainblade/awl/bottle opener-screwdriver/can opener. Bolsters and shield are nickle/silver, and the liners and pins are brass. Blades and backspring area are brush finished with a mirror polish everywhere else. Scales are Olive Green jigged bone.

Fit and finish is very good with even edge grinds that are sharp, zero blade play anywhere, backsprings have a good stoutness on all four, bail swings tight, the only fault I could find was in the backspring area where there are a few minor hairline gaps........

Overall not a bad piece at all. These are still made in China and are of the most recent releases since the brand is no longer associated with the Robert Klaas name. Not bad for a Scout costing a little over $20 but the Rough Rider version I believe is still a better buy in this pattern.
2xTap
-
@2xTap said:
Here's another I just got recently. This one a new release by Kissing Crane.........

A Scout pattern done in the standard 4-blade configuration. Closed length is 3 3/4" with 420 stainless steel mainblade/awl/bottle opener-screwdriver/can opener. Bolsters and shield are nickle/silver, and the liners and pins are brass. Blades and backspring area are brush finished with a mirror polish everywhere else. Scales are Olive Green jigged bone.

Fit and finish is very good with even edge grinds that are sharp, zero blade play anywhere, backsprings have a good stoutness on all four, bail swings tight, the only fault I could find was in the backspring area where there are a few minor hairline gaps........

Overall not a bad piece at all. These are still made in China and are of the most recent releases since the brand is no longer associated with the Robert Klaas name. Not bad for a Scout costing a little over $20 but the Rough Rider version I believe is still a better buy in this pattern.
2xTap
i really like that 2xtap , ive not seen the RR scout as i dont think HH do it on there site, ill have to take another look
love the scales on thay, -
sorry for mulit post i had problems posting this am :-[
-
-
Zed,
The Rough Rider versions are still being made, not sure of the place where you buy yours but they can be found. The Rough Rider Scout is a bit more burly than this KC version, and it's also designed off of a much older version of the Scout. And the RR version has a nicer finish being all mirror polished......as well as being cheaper. I picked up both of my Rough Rider Scouts combined for the cost of this single KC version.
2xTap
-
The Rough Rider versions are still being made, not sure of the place where you buy yours but they can be found. The Rough Rider Scout is a bit more burly than this KC version, and it's also designed off of a much older version of the Scout. And the RR version has a nicer finish being all mirror polished......as well as being cheaper. I picked up both of my Rough Rider Scouts combined for the cost of this single KC version.
2xTap
cheers 2xtap ill see what comes up, HH dont have it on there site so ill google and see :D

-
:ahhh this am postelk ridge stockman

schrade custom series whittler

RR peanut

Kissing cranes congress

-
Good buys, I have been wondering about Elk ridge knives for some time, but that wooden scaled one looks very nice. Nice bone on the Kissing Crane too.

I like the schrade´s pattern too, though I have found their finish hit and miss, usually the ends of the knife’s blade (I am sure they have a name..) touching the springs are not polished properly making them feel rough when opening or closing.
I am sure you will enjoy them all, the RR should be the best quality one, I assume.
Any, preliminary, observations?

As for the scout knives, if you are interested, I got one some time ago of THE auction site, for a very reasonable price nad they can still be found there, I posted a bit about it in the review section a few weeks back (yes I know, shameless self promotion >:D ).
-
@dks said:
Good buys, I have been wondering about Elk ridge knives for some time, but that wooden scaled one looks very nice. Nice bone on the Kissing Crane too.
I like the schrade´s pattern too, though I have found their finish hit and miss, usually the ends of the knife’s blade (I am sure they have a name..) touching the springs are not polished properly making them feel rough when opening or closing.
I am sure you will enjoy them all, the RR should be the best quality one, I assume.
Any, preliminary, observations?

As for the scout knives, if you are interested, I got one some time ago of THE auction site, for a very reasonable price nad they can still be found there, I posted a bit about it in the review section a few weeks back (yes I know, shameless self promotion >:D ).
well the RR peanut all seems solid for its little size, the cane creek has a 2 stop click (think thats what its called lol) very solid and fit and finnish spot on, the elk ridge doesnt have the same snap to the blades when opend but all finnish is very nice, main blade is like a toothpick in shape, scales really nice, my favourite is the schrade, the fit and finnish is very good and all blades snap nicely into place, i love the scales and there well fitted, all good ,
oh all blades pretty sharp , the peanuts are very sharp out the box as usual, -
-
Good buys, I have been wondering about Elk ridge knives for some time, but that wooden scaled one looks very nice. Nice bone on the Kissing Crane too.

I like the schrade´s pattern too, though I have found their finish hit and miss, usually the ends of the knife’s blade (I am sure they have a name..) touching the springs are not polished properly making them feel rough when opening or closing.
I am sure you will enjoy them all, the RR should be the best quality one, I assume.
Any, preliminary, observations?

As for the scout knives, if you are interested, I got one some time ago of THE auction site, for a very reasonable price nad they can still be found there, I posted a bit about it in the review section a few weeks back (yes I know, shameless self promotion >:D ).
well the RR peanut all seems solid for its little size, the cane creek has a 2 stop click (think thats what its called lol) very solid and fit and finnish spot on, the elk ridge doesnt have the same snap to the blades when opend but all finnish is very nice, main blade is like a toothpick in shape, scales really nice, my favourite is the schrade, the fit and finnish is very good and all blades snap nicely into place, i love the scales and there well fitted, all good ,
oh all blades pretty sharp , the peanuts are very sharp out the box as usual,I did wonder if the Schrade was made by the same people as the RR's ... the design looks a little **TOO ** similar to the RR stoneworx versions on HH's site ... same scalloped nail nicks, same bolsters, same scale design etc etc
-
@50ft-trad said:
Good buys, I have been wondering about Elk ridge knives for some time, but that wooden scaled one looks very nice. Nice bone on the Kissing Crane too.

I like the schrade´s pattern too, though I have found their finish hit and miss, usually the ends of the knife’s blade (I am sure they have a name..) touching the springs are not polished properly making them feel rough when opening or closing.
I am sure you will enjoy them all, the RR should be the best quality one, I assume.
Any, preliminary, observations?

As for the scout knives, if you are interested, I got one some time ago of THE auction site, for a very reasonable price nad they can still be found there, I posted a bit about it in the review section a few weeks back (yes I know, shameless self promotion >:D ).
well the RR peanut all seems solid for its little size, the cane creek has a 2 stop click (think thats what its called lol) very solid and fit and finnish spot on, the elk ridge doesnt have the same snap to the blades when opend but all finnish is very nice, main blade is like a toothpick in shape, scales really nice, my favourite is the schrade, the fit and finnish is very good and all blades snap nicely into place, i love the scales and there well fitted, all good ,
oh all blades pretty sharp , the peanuts are very sharp out the box as usual,I did wonder if the Schrade was made by the same people as the RR's ... the design looks a little **TOO ** similar to the RR stoneworx versions on HH's site ... same scalloped nail nicks, same bolsters, same scale design etc etc
yeah i thought that too alan, the blades look the same built quility, plus etching 440 razor sharp looks the same,
-
Maybe these are but I doubt, from my experience, that all Schrades are made by the same factory as RR, the quality of some that I have is way below RR... mind you I got some steel warrior and some buck creek, supposedly German, knives today and their quality was nothing to shout about..... I will post some pictures later, I am trying to sort the whole thing out with the dealer.
-
The Taylor Brand Schrades that are made in China are not made by the people that build the Rough Riders. While some of the patterns produced by both will be similar.....you will find the same when comparing some of these to the likes of Case and other bigger brands (alot of them are designed from original classic patterns from these bigger name brands).
Also, the quality from Taylor in their Schrade line is consistantly not as good as that of the Rough Riders, nor of many other import lines.
dks,
The Steel Warriors I haven't been all that impressed with myself. Some are quite good but they don't quite compare overall to the Rough Riders. But, I do have two Frost Family Brand Trappers that are of the same build as the Steel Warriors (same materials, same patterns, built by the same people) and they are as good or better than most of my Rough Riders. But these I believe are the exception, not the rule.......particularly when speaking of Frost Cutlery.
As to the Buck Creeks you mention, what is wrong with the ones you got?
I picked up a pair of Buck Creek Large Stockmans a while back and was quite impressed by their quality considering the price.........

Very good F&F on these two.........

And while German made they ain't quite up to the level of Friedrich Olbertz or Boker, their price makes up for the slight difference.
2xTap
-
part 1, what I got that was reasonably OK
-
part 2, The problems...
A crack, scales falling off (steel warrior), off centre blade, bolt sticking out, flaking Buck Creek, soft, flaky stag buck creek.
As I said, I am in contact with the seller and he is more than happy to replace any of them... I am trying to see if postage cost will be covered.
The stag on the buck creek is very similar to some stag I got on some, much cheaper, schrade deerslayers, i.e. not the most brilliant quality.
I have had problems with scales on buck and RR before so I know these occur with other, good quality, slipjoints.
For me, the Buck Creek are reasonably expensive knives (luxury items where looks and finish are very important) so I expect a much better level of finish than with the chinese made knives. I think Buck Creek and to the extend that I know, German Bulldog knives are not of the most brilliant quality, they seem to be below, similarly priced Case knives, from my limited experience...Zed, I still cant see the pictures...
-
@dks said:
part 2, The problems...A crack, scales falling off (steel warrior), off centre blade, bolt sticking out, flaking Buck Creek, soft, flaky stag buck creek.
As I said, I am in contact with the seller and he is more than happy to replace any of them... I am trying to see if postage cost will be covered.
The stag on the buck creek is very similar to some stag I got on some, much cheaper, schrade deerslayers, i.e. not the most brilliant quality.
I have had problems with scales on buck and RR before so I know these occur with other, good quality, slipjoints.
For me, the Buck Creek are reasonably expensive knives (luxury items where looks and finish are very important) so I expect a much better level of finish than with the chinese made knives. I think Buck Creek and to the extend that I know, German Bulldog knives are not of the most brilliant quality, they seem to be below, similarly priced Case knives, from my limited experience...Zed, I still cant see the pictures...
what pics ? :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
