March Break Project (Model Train Build)
-
No. They come pre-made. It would take me forever to do that sort of detail.
Update time.
I just finished installing the edge boards. I started off by fitting them in place. Then I cut out the paper templates last night while watching TV. This morning, I glued the edge boards together and then to the base. I then placed my paper templates onto the walls, and traced them using a pencil. The next step was to use my new fancy wire foam cutter. This was money well spent. It heats a nichrome wire which goes through the foam like it does not exist. I used this foam wire cutter to make my profile. Afterwards, I used an Exacto knife with a long blade to cut out the access ports in the back (The Leatherman MUT's saw does make a mess of Styrofoam). These will allow access to the track inside to fix any problems that might happen inside the mountain.
My next step after all of this is to make foam tunnel ceilings...and then the fun part of newspaper bundles and then plaster cloth over that to make the mountain.
Here are the photos.
The edge boards are now glued to each other and the base.

Next is to trace the paper template.

Is it wrong that I love my hot wire foam cutter so much? The tool made a tough job supper easy. Here you can see that I have finished using it, and have cut out two of the 3 tunnel access portals.

Onto the next step I guess...but I need a little break.

-
Wow, I didn't know there were going to be such large mountains! :) Looks like you're well on your way to an N-scale Gorre and Daphetid

-
Tell me about it. I was a little surprised at how high that corner mountain will be.
Well, looks like my next step might be to paint some burnt umber in the visible parts of those tunnels. I still haven't placed ballast in those locations yet either. I think it might be wise to eliminate as much of that white right now while I can.
-
That is going to be awesome.
Godd work Chako! -
Well not much time to work on the display due to work...however, this hasn't stopped me from buying a few more items for the build. This means that I will have to wait a few more weeks to know exactly what I am going to do as far as the town layout will be. I did buy a few wide track kits, controller, and motorized Tomix articulated tram. The idea is to somehow have a tram system incorporated into the town along with the train rail system. I am thinking a tram system from the train station into town and back again. This will be on a separate mini N scale rail system. I did receive my Bachmann Dynamis DCC system, but no DCC enabled engines yet to try it out.
So this is the plan.
- Two trains, one a freight train with a Kato Sound enabled DCC engine. The other is a Bachmann Amtrak Acela that is also DCC enabled... with no sound...but it does feature lighted cars. Not sure if this will work with my current track layout. If it doesn't, I have plans for it regardless. In that even, I will have to get another DCC enabled train engine...but I will cross that bridge if and when I get there.
- A tram system to freight people to and from the town.
- Seeing that the village is mostly made up of Japanese Tomytec buildings, I am thinking of going with that theme, even though the trains are North American. I bought a few more buildings, a train shed, and a few Japanese vendor stalls and sidewalk scenes from Tomytec. Guess I am not going with a 100% realistic set up, but it should prove interesting nonetheless.
Tomorrow should see me getting a few more things done on the display.

-
I finally got to adding some ballast at those tunnel entrances. I even added some scenic cement to the ballast between the ties. If this part doesn't look all that good once the display is finished, I can always get in there at a later date. So with that said, the tunnels are now finally completed. I just finished gluing the tunnel roofs into place. This part does not need to look good as it won't be seen later.
Here you can see the ballast added to the tunnel entryways. I paid attention to the center of the track, figuring I can add more to the outside later on.

Yay! the tunnel roof is now finally installed. I had hoped to be at this stage a week ago while I was still on vacation.

-
I won't be able to do anything now until a few more things come in.

I did migrate the buildings I currently have to see how they will fit onto the display. I now have to wait for that tram system and other building items to come in before I can plaster cloth everything.
Anyways, here is a test shot of the village area. Nothing is set in stone yet. So much for getting this done anytime soon. :D

-
Is it too late to consider a stream, with perhaps a waterfall coming off one of the hills? :)
-
There will be some sort of small stream coming down that mountain. That low spot in the front will also feature two culverts that came with the kit. I did buy special waterfall scenic glue for just that purpose. :D
-
Update time.
Not a whole lot to report on the build. Right now waiting on several key pieces. A few little items did come in this week but nothing major. But alas all is not good.
-
I bought a sound enabled diesel from Australia and it hasn't arrived. I checked eBay and found that the seller is no longer registered on eBay. I am going to give it a few more days and see what happens next. I am hoping beyond hope that it was sent to me and is on its way. I somehow have my doubts though. I may have to open a dispute claim if it doesn't arrive soon. :(
-
I received my Bachmann Amtrak Acela model and quickly found out that it doesn't run on tight curves. It is a beautiful train and I did buy 3 extra business cars for it. When I attempted to use the track that it does come in, it was too wide for my display table...so I set it up on the floor. The details are fantastic and DCC is definitely the way to go. You get a much smoother power band transition from DC. I guess that is one of the benefits of AC. On the plus side, I can at least try out the Bachmann Dynamis DCC controller. It works like a charm, and the cordless design is great. The train just won't fit on my display however.
-
I am still waiting for the Tomix tram track and Tram.
-
I also just purchased this morning a Tokyo Tomix Bus system. It is a rechargeable N scale bus that runs along special roadbed with a metal wire imbedded inside. The bus follows the wire via a small magnet. The bus system also comes with a bus station that the bus stops at and then continued on its way in a loop. More curious then anything else...and if I can incorporate this into the display along with that tram, it should give me some much needed movement and possibly interest in the final product.
Still unsure how both the tram and bus system will work on the display. I will need to get them first before I can do much more on the build in terms of the building area. The DCC sound enabled Diesel is my biggest concern right now, as a lot was planned around it. The Acela doesn't like tight track curves combined with the inability of the Dynamis DCC controller system in operating the regular DC engines, means I may be buying DCC enabled engines in the near future.
If all goes as planned, I should have a few more photos in here tomorrow.
-
-
ive been working on full sized steam engines today at the bluebell railway, now covered in soot

good fun though
-
That sounds like a lot of fun ryan1835.
Well not much to report other than a few pieces have come in. I haven't had a chance to do anything on the build until a few more key pieces come in. Then I will have to figure out how to integrate what I want before I can proceed any further.
In the mean time, here are a few photographs...
Here is the pride of my display. This is a Kato Sound enabled DCC EMD E8/9A. It has engine noise and all.

The tram just came in today. It is a Tomytec Tetsudou low floor articulated tram. Interestingly enough, these units come as a static display with fixed plastic wheels molded into a removable floorboard with molded seats. The neat part is that you can also buy a motor unit for them. Apparently there are a series of motor units that fit corresponding body shells. Simply pry off the shell and place it onto the motorized unit and you have a working tram.
Here, you can see the cheap plastic floorboard with the plastic static display track and articulated tram on its motorized base.

The articulated tram is a little larger than I expected. I have a few N scale static trams from another manufacturer, and the newer articulated tram design is a larger unit then these.

Here is the separate motorized base unit along with part of the upper tram shell.

Today, some of the tram track also came in. Unfortunately, I still do not have the tram control battery pack. I understand these tram systems run on 100 Volts and not 110. The tram track is called wide track and it is from Tomix. This track simulates tram rails imbedded in concrete.

Here is the articulated tram on the tracks.

I was thinking of making a party scene or special event scene. I have bought several Japanese Tomytec food vendors.

Here are two Japanese street scenes from Tomytec glued together.

Still waiting for the tram controller and a few more pieces of track, along with the tomytec bus stop system. I understand it is designed to connect with the tram tracks. Once I get that in, I should be ready to go.
-
just call me ryan, today i went back and we were removing the super heater elements from an engine very messy job and hard everything had baked tight so we had to heat everything up with propane before it would budge!
your model railways coming along nicely
-
Easter Monday is a good time to do a little more on the project. I still don't have all the pieces, however, I can't wait forever. With the nice weather hopefully around the corner, the call of the motorcycle will become a greater force. That and I have a friend who is competing with me in a friendly fashion. His layout is an HO scale, and it is big. We have egged each other on all winter, and I fear he might be winning...so I am going to try and do as much as I can today.
Time to continue my step by step illustrations...
I finally got around to cutting the last flat pieced for the village and factory. Before I install all of the pre-fitted foam pieces, I have to glue down the support pillars.

Now that all of the flat pieces are now glued, the next step is a bit time consuming. I have spent a few hours folding newspaper to act as a support for the plaster cloth covering.

Yay, this part is done! Only 5 newspapers had to be used. I am going to take a break, and then comes the real fun and messy step, plaster cloth covering of everything.

I find it a little ironic and amusing to think that this was the step I thought I would be back in March as I was going back to work from my holidays. I had it right, only wrong holiday. :D
-
I am starting to plaster. Now things are starting to look a little better. :D

-
I enjoy watching this thread, excellent job you're doing there Chako!
Can't wait to see it finished. -
-
Your mountain is beginning to look mountainous :)
-
Oh yeah. I gained a day! :D
-
If you plug the tram into a 220 volt socket will it go twice as fast?

Just kidding, nice work Chako!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



