Small knife rust resistance experiment
-
Yes, the non rusty blade had many more visual scratches than the non rusted. Also, the non rusted was in the same salt conditions for a week as the rusted and didnt show any rust at all, even though the first blade in salt got obvious rust in the first week.
In the controlled jar, the rust from the blade being exposed to air/water showed no more rust at the surface level than that which was submerged all the time (the tip)
I would assume the non rusted is newer, and obviously pitting etc on the older blade can be smaller than seen by the naked eye, but you would have thought visual scratches were just as detrimental as unseen pitting?
Also related to that, would the cutting edge not be one of the first expected areas to rust? - its not polished to the degree that the blade is.
Can anyone approximate the ages of the blades based on the nail nicks? -
@HawkeyX said:
Yes, the non rusty blade had many more visual scratches than the non rusted. Also, the non rusted was in the same salt conditions for a week as the rusted and didnt show any rust at all, even though the first blade in salt got obvious rust in the first week.I thought the non-rusted had always been in plain water - first fully submerged then partially

@HawkeyX said:
In the controlled jar, the rust from the blade being exposed to air/water showed no more rust at the surface level than that which was submerged all the time (the tip)That did surprise me - certainly very different from what I've seen before. But that was over FAR greater periods of time and not on stainless knives :D
@HawkeyX said:
I would assume the non rusted is newer, and obviously pitting etc on the older blade can be smaller than seen by the naked eye, but you would have thought visual scratches were just as detrimental as unseen pitting?
Also related to that, would the cutting edge not be one of the first expected areas to rust? - its not polished to the degree that the blade is.
Can anyone approximate the ages of the blades based on the nail nicks?I'd have expected that too - lots of surprises so far

Lets hope they're both still there next week :) -
@50ft-trad said:
Yes, the non rusty blade had many more visual scratches than the non rusted. Also, the non rusted was in the same salt conditions for a week as the rusted and didnt show any rust at all, even though the first blade in salt got obvious rust in the first week.
I thought the non-rusted had always been in plain water - first fully submerged then partially

Sorry for the confusion. I placed the fresh water one in salt water with the other blade last week.
Fingers crossed the blades survive the wilderness. Would be great to see how the non rusted goes over a week!
Stormy conditions at the moment however, so will have to wait and 'sea' -
Ha Vegemite again :). I actually just had a Vegemite sandwich 20 minutes ago, something i haven't had in a long time!
This is going to be real interesting to see how they go being left out in the sea. such a good idea

I would have thought the metal is the same make up throughout so it would not matter if there was scratched or not. Theres no coating so i dont think scratches would rust any more.
-
@50ft-trad said:
Yes, the non rusty blade had many more visual scratches than the non rusted. Also, the non rusted was in the same salt conditions for a week as the rusted and didnt show any rust at all, even though the first blade in salt got obvious rust in the first week.
I thought the non-rusted had always been in plain water - first fully submerged then partially

Sorry for the confusion. I placed the fresh water one in salt water with the other blade last week.
Sorry - must have missed an episode. I'm back on track now :D -
Update time! :_c:
So I managed to catch low tide today and wandered down to the secret cove of the blades...
I forgot to take my camera, but was also 50/50 they would be there. About 30m away from the spot I saw a shimmering light that could only be a swiss blade (well, ok, any shining metal).
On close inspection, both blades are doing pretty darn good. The rustless one finally has a small rust stain, but this is at the pivot point, under the fishing line holding it there.So they are holding up very well to the ocean so far (and are still there!). I'll try to get a pic before easter is over.
@Cyclone82 said:
I would have thought the metal is the same make up throughout so it would not matter if there was scratched or not. Theres no coating so i dont think scratches would rust any more.Im no metallurgist, but thats a good point. I guess the only difference would be areas that are not as finely polished (e.g. bade edge), but so far neither scratch or cutting edge is showing to be any less resistant than other areas.
-
Just managed to catch the tide before sun down today.
Both blades still hanging around, both doing pretty good after a week in the ocean (sorry for the amount of noise in images, had to use a fairly high iso!):

As in last post, only the small bit of rust stain on the pivot point of 'non rust' blade. Rust blade is looking no worse than several weeks ago.

-
This is such a great thread

If now the pivot point is rusting it would kind of back up the theory that high friction/use area rust faster. Or it would prove that rust is completely random ::) :D
-
Wow, this is an amazing test. :) After seeing how quickly rust developed during the submerged-in-salt-water-jar test, I expected we'd see a lot more rust by now on the blades tied to the oceanside rock. These results so far are most surprising.

-
So another week update.
I only just caught the tide again today and initially could only see the fishing line and not the blades. Luckly they had just tucked behind the rock and have survived another week.
So hows the rust going? - lets see:


Not bad at all!!!
Im going to give them one more week in the ocean and then bring them home for some closeups and to see how well I can clean them up again.
Might be time for a fuller experiment to be formed me thinks :sak: -
It's a good question, not only how widespread the rust is, but how deeply has the rust taken hold?
-
AMAZINGLY little corrosion for the environment and length of time those blades have been exposed to it.
Heck, I can still see your reflection in the second photo!! :o :D -
This is such a great topic
.And I think the small knives are doing an amazing job, impressive results :o.
(next test with some Leatherman knives ... ?
) -
Without getting close up yesterday, I think the only potentially bad rust is on the tip of what was the salt blade. Im pretty sure the rest will polish off next week (but we will have to wait to find out). I have an alright closeup lens, so will make sure I get pics.
I'd be happy to do a Leatherman test, but I only own a Juice and Squirt and dont want to experiment with them lol. (donations accepted
)Related however, I do plan to up the ante with another Vic test. I just need to gather all the pieces and finish this one before I reveal it!
-
The metal quality must be pretty good. Those blades are holding out fantastically.
-
Been a bit busy of late, but finally have got around to the update.
So as usual, waiting for low tide I made my way down to the 'spot'

As with every other time, I was happy to see the blades were still there, not stolen or swept away by the tide (we had a particularly big storm the week leading up to collection)

If anything, they almost looked better than the week before I think!

So thats the end of their venture at the beach. Before closing this section of the test and moving onto bigger experiments I will find some time in the week to take some closeup shots of the blades as they are, plus see how good I can clean them up :)

-
This has been a great experiment , thanks mate

-
Great info. Thanks.

-
What an eye opener! :o
Great experiment.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login