March Break Project (Model Train Build)
-
just call me ryan, today i went back and we were removing the super heater elements from an engine very messy job and hard everything had baked tight so we had to heat everything up with propane before it would budge!
your model railways coming along nicely
-
Easter Monday is a good time to do a little more on the project. I still don't have all the pieces, however, I can't wait forever. With the nice weather hopefully around the corner, the call of the motorcycle will become a greater force. That and I have a friend who is competing with me in a friendly fashion. His layout is an HO scale, and it is big. We have egged each other on all winter, and I fear he might be winning...so I am going to try and do as much as I can today.
Time to continue my step by step illustrations...
I finally got around to cutting the last flat pieced for the village and factory. Before I install all of the pre-fitted foam pieces, I have to glue down the support pillars.

Now that all of the flat pieces are now glued, the next step is a bit time consuming. I have spent a few hours folding newspaper to act as a support for the plaster cloth covering.

Yay, this part is done! Only 5 newspapers had to be used. I am going to take a break, and then comes the real fun and messy step, plaster cloth covering of everything.

I find it a little ironic and amusing to think that this was the step I thought I would be back in March as I was going back to work from my holidays. I had it right, only wrong holiday. :D
-
I am starting to plaster. Now things are starting to look a little better. :D

-
I enjoy watching this thread, excellent job you're doing there Chako!
Can't wait to see it finished. -
-
Your mountain is beginning to look mountainous :)
-
Oh yeah. I gained a day! :D
-
If you plug the tram into a 220 volt socket will it go twice as fast?

Just kidding, nice work Chako! -
Well, I just finished plastering the whole thing with one layer. That took a long time. :o



That is it for me tonight. It was a good day of progress, and it wasn't on a Monday at that.
:D -
Finished a second layer of plaster. Now the whole thing is easier to pick up and move, as that plaster surface gives the whole piece some much needed structural integrity.
-
You've made some great progress.... looking forward to the next bit :D
-
Looking good!

-
Well Nuphoria, not sure if the next step is all that exciting.
After work today, I trimmed the plaster cloth to fit the 4 tunnel caps. Now they look a lot better, not to mention they now fit.


I also mixed 7 Oz of water with 2 1/2 cups of hydrocal. I poured this into the rubber rock face moulds after wetting them with some soapy water to prevent bubbling.


Now all I have to do is wait a full day or so to see if my castings are successful.
-
Another busy day on the build. The rocks turned out great. I haven't installed them yet, as I am sure that will take a lot of fitting to make them look good. However, today, I finished gluing down the track bed and track.
Here is one of those rock castings...the largest of the lot.

Here, I am using some heavy glue containers to keep the track in contact with the track bed. The instructions tell to use foam tack glue, and that is what I did. The glue is slow drying and becomes very tacky after a few minutes. Great stuff to work with as it allows you to make corrections 10 minutes later with ease. The glue needs to dry overnight.

-
I hadn't checked this thread in a few weeks. Awesome progress Chako!

-
Thanks. I wished I was a lot closer to being finished, but slow and steady usually gets me there in one piece. :D
-
I just received something in the mail today, and I am stoked. A little back-story is in order first.
Several months ago, I decided that I would like a DCC controller as I would like a train engine with sound. Well, I bought a Bachmann Dynamis IR system for that purpose. I then looked online for any N scale engines with sound. I was lucky enough to have found one and placed a winning bid on it. Well, because the seller soon got his eBay registration revoked, I was very worried I wouldn't get the engine. That and it did take its sweet time getting to me. So long was the time, that I had a PayPal case on the seller.
While I was worrying about the sound enabled engine, I did some reading and found that Backmann had an N scale Amtrack Acela with lighted cars that was DCC enabled out of the box. I bought that off of eBay. Well, the Acela came in before the engine, and I quickly found out it would not fit on my tight curved track. And I thought I had done my research. While puzzling this one over, and quickly realizing that I only had a few DC only engines, and no DCC, the sound enabled engine came in.
After quickly testing the engine out, and canceling the PayPal case against the seller, I really liked the engine and was quite happy I had went this route with the train. I placed the engine in storage while I continued my build of the display.
Well, a few weeks ago, I decided to try the engine with some of my rolling stock, and quickly found out that the Kato coupler is not compatible with the Bachmann couplers. Argh! After digging around on the net, I found out that the Kato couplers are for Kato passenger cars. I could replace the couplers, but that would mean opening up a very expensive engine. I had originally wanted a passenger train anyways (remember that Acela), so I looked once again on eBay and found a 10 car starter set that matched. I bought it...and it just came in today.
Well I must say, I am super impressed with the quality and details of the cars. I think the Southern Pacific Daylight colours are the nicest on a train. I tried it out on my track, and it all works great.
Photo time.
The engine and 10 car basic set is long. Interestingly enough, there are a few articulated cars in this basic set.

Here you can see a pair of articulated cars. The details on this Kato set is astonishing. The rear observation car even has rear lights and a lighted name panel. Very nice touches.

The colours are very nice.

As for my Bachmann freight, I guess I can either buy a DCC enabled engine for my bachmann rolling freight, or leave it as part of the decoration. Not sure what I am going to do just yet. I know I have another Southern Pacific Daylight engine coming it that I will convert to DCC so that I can have a consist, and I just pulled the trigger on 4 sets of articulated cars which will give me the full train, along with enough passenger car lighting kits to do 12 cars. But enough of that, here is a single track shop that I will be installing at the front. I have to trim some of the track bed to get a better fit. I just placed it there to get an idea of what it will look like.

So the lesson here is to delve deep into the research aspects before you buy. This hobby had a lot of gotchas if you're not careful. I am just happy that I now have something I can run on this display. As for the Acela, well I have a plan for it later after I finish this build.

-
what size is N? i was at a railway today that had 45mm gauge track running outside and i got to drive a 10 and a 1/4 inch engine :D
-
That would most likely be G scale. These trains are commonly used in gardens.
N scale is 9mm wide.
In fact, here is a good guide to track gauge and how it relates to the various gauge designations. Just follow the link and look at the chart midway on the page.
http://www.thestorefinder.com/rr/library/gauge-FAQ.html
I managed to do a little more today. I started off by masking the tracks.

Then I mixed 2 oz of earth pigment with 16 oz of water, and used a foam brush to apply the wash to the white plaster.

Hmmm...looks a lot better than that white. :D

-
yeah, this was in a garden. looking good, think you need a steam engine for the track though
:Di take it the track will have working points?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



