Surge replacement blades
-
The replacement blade is a nice idea. Hoever, it may be not practical.
The T-shank adapter takes about 2 cm (0.8 in) of usable blade length. It makes the saw's effective cutting stroke even shorter than that of a Swiss Army knife. These replacement blades are designed for power tools. A reciprocal power tool has no problem accept such a shortend blade. A human may find it difficult to use.
I haven't seen any T-shanked files. Needless to say, power tool users do not need T-shanked files and there is no way to buy replacement files except from Leatherman.
As to saws, the majority of T-shanked saws are too lengthy to fit into a multi-tool. Therefore, it may be difficult to get a replacement blade for a specific job. The shortest curve wood saws are short enough to fit Surge. Some fine thin metal saws are also short enough. You don't want to use a hand tool to cut thick metal anyway.
If you carry spare saws separately, you may use Surge as a good-enough saw handle.
As shown by my comparison, Surge's saw is only marginally longer than that of a cheap Sheffield's.
I prefer to have a fixed long wood saw (2 cm longer) and a T-shank adapter that replaces the bit adapter. The bits may also be T-shanked (no more two-in-one bits). This T-snak adapter may allow a much longer file stored in the sheath with the bits. The T-shank adapter and the bit adapter are about the same size only the T-shank adapter is a little thinner.


-
Welcome sir! Very good points you make there, and a clear comparison picture too. The interchangable blade concept certainly comes at a price :-\
-
Welcome toytoy,
I got a Surge recently, and have had many of the same conclusions about the adapter... For me though, the big difference is that the Surge is a "with sheath" tool for me, so I can carry blades that are a bit longer even though they wouldn't fit in the closed tool. Also, about the power-tool vs. hand-tool thing- I think you're probably right when it comes to the blades with big or very agressive teeth (I saw some like this that were labeled for "speed"), but I suspect that the ones with smaller teeth might work just fine. I have yet to test them out though...
One thing I do really like is the option of having metal-cutting blades. :) Doing electrical work for a few years, I've used sawz-all blades for cutting nails (to get boxes out of the wall) pretty often. I was too cheap to get the real tool... Anyhow, they worked good for me then, and the Surge should offer a much better handle than the wire & electric tape "handles" I made for the sawz-all blades... ::)
-
I actually love the concept of the replacement blade system on the Surge. The only blade however that I have purchased is the Lenox ceramic blade. I used it the other day to cut tile in the bathroom. I will confess however tat the blade has been in the sheath now for well over a year and this was the first time that I had used it. It also really is thinner than the surge saw and file, but it did work.
-
Yeah, but the saw on the Surge cuts much better than the Sheffield...
-
True. But Sheffield's pliers are spring-loaded and it makes the pliers easier to use in certain circumstances. Its below-average workmanship (especially the main blade) also makes it a perfect choice for some non-life-critical uses that I may lose it. I have much less love on this tool. A tool is a tool is a tool, after all.
-
Sheffield also makes the Lowes house brand in which I have highly touted here on the forum and it has become my loaner tool and has preformed very well on that part.
-
Knife length (Surge /Wave): 1.17
Saw length (Surge /Wave): 0.90
File length (Surge /Wave): Approximately 0.90
-
-
I can't remember where I read it but someone pointed out that with the removeable/replaceable file you are able to sharpen the blade on your multitool. If you are out and about and you bugger up your blade with no sharpener around the diamond file could come in real handy as you're able to take it out of the tool. You couldn't do that with any other multitool (can you?)

Anyway I bought a surge and then decided to buy the replacement saw and file direct from Leatherman. I looked them up on their site and they are only 5 USD for the pair in a nice little nylon slipcase. I thinking on getting more and putting a file in any multitool pouch that will hold it. The Leatherman sheaths with the elastic pockets seem ideal for this. You can cut the slipcase in half as it is 2 separate compartments to make it easier to fit.
Is this a good idea or not? Please give me some feedback before I go off and order a dozen of these. :ahhh
Calvin
-
@kreskin13 said:
I thinking on getting more and putting a file in any multitool pouch that will hold it. The Leatherman sheaths with the elastic pockets seem ideal for this. You can cut the slipcase in half as it is 2 separate compartments to make it easier to fit.Seems like a good idea. Just be careful cutting the nylon case as the seam line is fairly thin.
You could even go so far as to epoxy the half-sleeve to the interior of the selected sheath so it doesn't bounce around and make extraction/insertion of the tool more difficult.
-
I thinking on getting more and putting a file in any multitool pouch that will hold it. The Leatherman sheaths with the elastic pockets seem ideal for this. You can cut the slipcase in half as it is 2 separate compartments to make it easier to fit.
Seems like a good idea. Just be careful cutting the nylon case as the seam line is fairly thin.
You could even go so far as to epoxy the half-sleeve to the interior of the selected sheath so it doesn't bounce around and make extraction/insertion of the tool more difficult.
You're right Spoon, that seam line is very thin and being someone who makes his living hand cutting similar materials with both a razor knife and scissors to tight tolerances, I don't recommend trying it at all. I think a better move would be to sacrifice one sleeve by giving the entire seam line to the other sleeve. You could try some sort of tape or something to try and save the other sleeve but I don't hold much hope for that.
The other option would be to use a single nylon slipcase that some jigsaw blades come in. i don't know if any of the makers of the "T" shape shank needed use that type of package.
Calvin
-
@kreskin13 said:
I can't remember where I read it but someone pointed out that with the removeable/replaceable file you are able to sharpen the blade on your multitool. If you are out and about and you bugger up your blade with no sharpener around the diamond file could come in real handy as you're able to take it out of the tool. You couldn't do that with any other multitool (can you?)
That is an excellent point Calvin! :)
I cannot think of any others.
-
Years ago I saw it on a Japanese TV show:
Bring a piece of aluminium foil with you. You may fold it over and over until it is several layers thick. Then you use it to wrap the blade. Hold the foil with your left fingers and force the blade to cut through the foil. Do it a few times and you will have a sharpened blade.
I did not try it. It may be useful.
http://lifehacker.com/software/macgyver-tip/use-aluminum-foil-to-sharpen-scissors-300223.php
-
I can't remember where I read it but someone pointed out that with the removeable/replaceable file you are able to sharpen the blade on your multitool. If you are out and about and you bugger up your blade with no sharpener around the diamond file could come in real handy as you're able to take it out of the tool. You couldn't do that with any other multitool (can you?)

That is an excellent point Calvin! :)
I cannot think of any others.
Thanks, but I can't take credit for it. I'm pretty sure I first heard about doing that from someone on this site. Lots of smart people here!
Calvin
-
Was it from this?
/topic/2137 -
That covers it but I don't believe it's the one I'm thinking about. I remember the person saying if he had only his Wave with a dull blade he wouldn't be able to sharpen it even though the Wave has a diamond file. I haven't been able to find it but I''ll keep looking.

The idea of having that diamond file meant for the Surge in any multitool or knife pouch where it will fit still sounds good. The fact that Leatherman sells the twin pack of the file and saw with the slipcase for only 5 USD makes it even sweeter!
Calvin
-
I remember that thread aswell, haven't got a clue where it is though!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login