Surge replacement blades
-
I can't remember where I read it but someone pointed out that with the removeable/replaceable file you are able to sharpen the blade on your multitool. If you are out and about and you bugger up your blade with no sharpener around the diamond file could come in real handy as you're able to take it out of the tool. You couldn't do that with any other multitool (can you?)

Anyway I bought a surge and then decided to buy the replacement saw and file direct from Leatherman. I looked them up on their site and they are only 5 USD for the pair in a nice little nylon slipcase. I thinking on getting more and putting a file in any multitool pouch that will hold it. The Leatherman sheaths with the elastic pockets seem ideal for this. You can cut the slipcase in half as it is 2 separate compartments to make it easier to fit.
Is this a good idea or not? Please give me some feedback before I go off and order a dozen of these. :ahhh
Calvin
-
@kreskin13 said:
I thinking on getting more and putting a file in any multitool pouch that will hold it. The Leatherman sheaths with the elastic pockets seem ideal for this. You can cut the slipcase in half as it is 2 separate compartments to make it easier to fit.Seems like a good idea. Just be careful cutting the nylon case as the seam line is fairly thin.
You could even go so far as to epoxy the half-sleeve to the interior of the selected sheath so it doesn't bounce around and make extraction/insertion of the tool more difficult.
-
I thinking on getting more and putting a file in any multitool pouch that will hold it. The Leatherman sheaths with the elastic pockets seem ideal for this. You can cut the slipcase in half as it is 2 separate compartments to make it easier to fit.
Seems like a good idea. Just be careful cutting the nylon case as the seam line is fairly thin.
You could even go so far as to epoxy the half-sleeve to the interior of the selected sheath so it doesn't bounce around and make extraction/insertion of the tool more difficult.
You're right Spoon, that seam line is very thin and being someone who makes his living hand cutting similar materials with both a razor knife and scissors to tight tolerances, I don't recommend trying it at all. I think a better move would be to sacrifice one sleeve by giving the entire seam line to the other sleeve. You could try some sort of tape or something to try and save the other sleeve but I don't hold much hope for that.
The other option would be to use a single nylon slipcase that some jigsaw blades come in. i don't know if any of the makers of the "T" shape shank needed use that type of package.
Calvin
-
@kreskin13 said:
I can't remember where I read it but someone pointed out that with the removeable/replaceable file you are able to sharpen the blade on your multitool. If you are out and about and you bugger up your blade with no sharpener around the diamond file could come in real handy as you're able to take it out of the tool. You couldn't do that with any other multitool (can you?)
That is an excellent point Calvin! :)
I cannot think of any others.
-
Years ago I saw it on a Japanese TV show:
Bring a piece of aluminium foil with you. You may fold it over and over until it is several layers thick. Then you use it to wrap the blade. Hold the foil with your left fingers and force the blade to cut through the foil. Do it a few times and you will have a sharpened blade.
I did not try it. It may be useful.
http://lifehacker.com/software/macgyver-tip/use-aluminum-foil-to-sharpen-scissors-300223.php
-
I can't remember where I read it but someone pointed out that with the removeable/replaceable file you are able to sharpen the blade on your multitool. If you are out and about and you bugger up your blade with no sharpener around the diamond file could come in real handy as you're able to take it out of the tool. You couldn't do that with any other multitool (can you?)

That is an excellent point Calvin! :)
I cannot think of any others.
Thanks, but I can't take credit for it. I'm pretty sure I first heard about doing that from someone on this site. Lots of smart people here!
Calvin
-
Was it from this?
/topic/2137 -
That covers it but I don't believe it's the one I'm thinking about. I remember the person saying if he had only his Wave with a dull blade he wouldn't be able to sharpen it even though the Wave has a diamond file. I haven't been able to find it but I''ll keep looking.

The idea of having that diamond file meant for the Surge in any multitool or knife pouch where it will fit still sounds good. The fact that Leatherman sells the twin pack of the file and saw with the slipcase for only 5 USD makes it even sweeter!
Calvin
-
I remember that thread aswell, haven't got a clue where it is though!
-
I really think the LM should produce a bunch of accessories for the SURGE adapter. Like a guthook, a nice chisel, and maybe even a set of extra long hex bits for it so you could get at recessed screws..
-
@Leatherman123 said:
I really think the LM should produce a bunch of accessories for the SURGE adapter. Like a guthook, a nice chisel, and maybe even a set of extra long hex bits for it so you could get at recessed screws..I'm wondering though if the T-shank holder would stand up to the torque of a screwdriver? :-\
-
I doubt it. As tough as the Surge is, the T shank isn't designed for that kind of thing. I bet you'd blow it out in no time.
Def
-
@Defender said:
I doubt it. As tough as the Surge is, the T shank isn't designed for that kind of thing. I bet you'd blow it out in no time.Def
Same here. Heck some days I wonder if the blade holder is strong enough for its intended purpose. When I was carrying the surge I had to use the saw to cut some boards for a quick project. I found that if you combined any side to side force on the saw with the bottom of the blade holder sleeve thingy hitting the board, the blade holder would pop open in no time. The same thing happened when I tried to cut a thin strip of aluminum with a metal blade, although to the surge's defense, the metal blade was a bit too narrow and had excessive play in the holder to begin with. I'm not saying the blade exchanger is a bad design, but it sure could be more durable. Basically, the blade exchanger is primarily what keeps me from carrying the surge because I can't just like using the wood saw. It's a shame because I really liked having a real set of scissors that I could acces with one hand.
-
Yeah, the extra long hex bit was just I thought because I needed one more thing! It would never work!
-
I have found that the BOSCH "Progressor" blades are great for use with the Surge. Near the "T" they are finer toothed for starting off a cut. Then as you go farther from the "T" it gets coarser toothed. They work GREAT IMHO.
Here are two pics so you can see the size of these blades. The are hard to fit in the case, but I keep on in the case, and then four more in my pack for spares. Just figured I would share my find. Hope it helps someone.


-
Yeah, those do look quite cool! How much did you pay for them? Do they fit snug in the blade exchanger? BTW, the SURGE is a great tool!
-
@Leatherman123 said:
Yeah, those do look quite cool! How much did you pay for them? Do they fit snug in the blade exchanger? BTW, the SURGE is a great tool!They were I think $8(US) for a three pack. As for the fit, they rattle. So far every blade I have tried does not fit snug. I think leather man did this on purpose so only their blades would fit snug. I did find a quick fix though:
Take a small piece of first aide tape and double it oer the "T" part. One layer on either side of the blade will make it fit nice and snug. The Tape stays on with the blade out of the Surge and it is cheap and easy to do. I used the "Water Proof Johnson and Johnson" stuff. You would want to use the 1/2 inch tape.
Here is a pic to illustrate what I did:



Hope it helps!
-
Yeah, that is quite the good idea! What do you cut with the saws?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login