Show off your multitool mods!
-
Cheers Allan. As said in the other thread this is the tool I wanted the PST to be; a non-locking Pulse. :D
-
Great mod Gareth,I wanted to put my original 83 PST blade and awl into my PSTII,but Bob said he would kick my a$$ if I defaced an original PST,and I just got my Pulse on the 5th of this month,and it hasn't left my side sense.
& 
-
Thanks Smitty.
I'll side with Bob on that one though, get a slightly less significant PST too pull apart and I'd love to see your mod. :D -
Nicely done Gareth
makes a lot of sense over here. -
+1

-
cheers chaps. :)
-
how did you manage to undo those fastners?
-
Nothing more complicated that two other pliers and a steady grip. :D
-
Here’s a few of mine – nothing fantastically complicated mind you. This is like playing with lego compared to some of the boffins on here :D I noticed that mod’s seem to have to be given names which I find quite chucklesome, so I put my tongue firmly in my cheek when naming these:
<u>Gerber DEsTroyer</u>
Simply a 600 DET with the crimping pliers swapped out for the heads off a Paul Chen Multitasker
<u>Leatherman Diet Wave (or Wave Lite)</u>
Take a standard Wave and remove all the internal tools
<u>Leatherman Roundhouse (an Awesome Kick)</u>
Using the removed innards from the above Wave and an awl ground from one of the drivers
<u>
SOG P4 (Perfect Pocket Power Plier)</u>
Details here (LINK)
-
Can't recall whether I've seen your Roundhouse before Al, but it looks like it would be quite handy for doing tasks in "public" areas.

(great name too by the way!) :D
-
Very cool mods mate, nice to see them here. 8)
-
@50ft-trad said:
Heres a few of mine nothing fantastically complicated mind you. This is like playing with lego compared to some of the boffins on here :D I noticed that mods seem to have to be given names which I find quite chucklesome, so I put my tongue firmly in my cheek when naming these:Gerber DEsTroyer
Simply a 600 DET with the crimping pliers swapped out for the heads off a Paul Chen Multitasker
Leatherman Diet Wave (or Wave Lite)
Take a standard Wave and remove all the internal tools
Leatherman Roundhouse (an Awesome Kick)
Using the removed innards from the above Wave and an awl ground from one of the drivers
SOG P4 (Perfect Pocket Power Plier)
Details here (LINK)
I for one LOVE naming my tools. My cameras (freelance day job) all have names of beautiful women. And of course, my modded MTs have names too! :)
-
Thanks guys.
@J-Sews: I ditched the blade as I seldom use them in MT's anyway so I could squeeze another tool in :D I reckon in "public" areas, people would assume there is a knife in it anyway - but then that's never stopped me using tools openly before ;) It's amazing how "forgiving" people are when you're getting them out of a tangle :D :D
@zoidberg: The awl is my only faux pas on that tool - I ground the awl on the wrong side
(still works though)@Metropolicity: I quite like seeing others name theirs, but somehow feel a little silly naming mine :-[ :D
Only thing extra I'd like to do is fit a low riding clip on the SOG so that only the clip is visible. I don't have anything I can bolt on at this stage, but I'm going to keep my eyes open. Ideally I want it at the plier end to prevent the arms opening in the pocket which kind of complicates it a bit (getting over the gear covers). If anyone has any solutions, I'd be grateful for suggestions

(Still need to find small enough drivers/keys to see if I can poach the spring mechanism off the Paul Chen frame pivot for the Gerber too)
-
@50ft-trad said:
Thanks guys.@J-Sews: I ditched the blade as I seldom use them in MT's anyway so I could squeeze another tool in :D I reckon in "public" areas, people would assume there is a knife in it anyway - but then that's never stopped me using tools openly before ;) It's amazing how "forgiving" people are when you're getting them out of a tangle :D :D
@zoidberg: The awl is my only faux pas on that tool - I ground the awl on the wrong side
(still works though)@Metropolicity: I quite like seeing others name theirs, but somehow feel a little silly naming mine :-[ :D
Only thing extra I'd like to do is fit a low riding clip on the SOG so that only the clip is visible. I don't have anything I can bolt on at this stage, but I'm going to keep my eyes open. Ideally I want it at the plier end to prevent the arms opening in the pocket which kind of complicates it a bit (getting over the gear covers). If anyone has any solutions, I'd be grateful for suggestions

(Still need to find small enough drivers/keys to see if I can poach the spring mechanism off the Paul Chen frame pivot for the Gerber too)
I am working on my own Gerber DEsTroyer...except mine is made from a regular 600..not sure what to call it yet :) The spring mechanism will be tough, I haven't got my PCMT (i ordered 2) yet but I am sure we can figure it out!
Nice work!
-
@Metropolicity said:
I am working on my own Gerber DEsTroyer...except mine is made from a regular 600..not sure what to call it yet :) The spring mechanism will be tough, I haven't got my PCMT (i ordered 2) yet but I am sure we can figure it out!Nice work!
Cheers

I'm pretty sure a new housing can be fashioned to seat the spring assembly on the other body, but I've just not come up with the keys yet. I can't tell if they are a really small torx or a hex fitting, but a 1.5mm key doesn't go in :o I'm also not wanting to drill them out in case I need them again or they form part of the internal mechanics.
I've not looked at it for a while TBH, so can't remember details - but even if the existing polymer cover cannot be salvaged/modified it will still serve as a template so long as I don't disassemble by destruction
-
I was going to see about adding a circular torsion spring, heating 2 specific points in the middle of the shear steel to drill 2 tiny holes in it to keep the spring legs in place.
I bet the internals of the spring mechanism on the PCMT will be easy to extract...I'll know more then I get mine in. I have torx bits coming out of my ears so i am sure I can find something. I'll keep you updated.
-
@Metropolicity said:
I was going to see about adding a circular torsion spring, heating 2 specific points in the middle of the shear steel to drill 2 tiny holes in it to keep the spring legs in place.I bet the internals of the spring mechanism on the PCMT will be easy to extract...I'll know more then I get mine in. I have torx bits coming out of my ears so i am sure I can find something. I'll keep you updated.
Excellent - I'll look forward to hearing your thoughts when you've played with it

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


