Show off your multitool mods!
-
some amazing mods in this thread..all of them really..wow
-
This is so small I was going to wait until I had something better and just include this but its really starting to turn into my favorite "mod" I've done to my Style CS. The stock bottle opener works fine and all but the way it worked always kind of annoyed me. I usually found myself tilting the bottle over a little and angling my wrist all weird just to have the clip shoot the cap across the floor
So I found myself shuffling through the kitchen draw all the time to find a real bottle opener even though I had my Style CS right in my pocket.This was so easy, 15 seconds with a Dremel tool and this went from an OK bottle opener to my favorite bottle opener. If you like openers that work this way by lifting up then this is too easy not to do. And it still retains the original functionality so its hard to see a down side.
It's kind of hard to see exactly because of the extra layer I put on the back so I traced a line to show the cut better. With a stock Style CS this would be even easier, I had to bend my clip a little to go around the bolt head. I also trimmed back the top part that touches the top of the bottle cap but I don't think it was totally necessary.
Also, I just read the Style CS review on this site and I agree about the knife blade being a little hard to open because of the nail nick being too shallow and too far back. Swapping it out for a blade from a squirt works a lot better.


-
Very nice.
Certainly makes for a more 'conventional' bottle opener. :) -
Good mod EvilOlivE,never liked the original design for an opener.

-
Skeletool CXL ;)
Thread is here /post/468738

-
CXL, nice! :D
-
PST 1.5 :D.

Starting with a PST and a PST II they were stripped of their tools and reassembled as above. Basically this is an old style PST II fitted with a plain edged blade and new style Phillips. Not so obvious is the fact I've squeezed in an extra slip washer on the blade so as it now opens with no tool clumping, much like the ST300.
With the bits left over I made this 'The Loner'. :D

-
Clever mod Gareth..

-
Cheers Allan. As said in the other thread this is the tool I wanted the PST to be; a non-locking Pulse. :D
-
Great mod Gareth,I wanted to put my original 83 PST blade and awl into my PSTII,but Bob said he would kick my a$$ if I defaced an original PST,and I just got my Pulse on the 5th of this month,and it hasn't left my side sense.
& 
-
Thanks Smitty.
I'll side with Bob on that one though, get a slightly less significant PST too pull apart and I'd love to see your mod. :D -
Nicely done Gareth
makes a lot of sense over here. -
+1

-
cheers chaps. :)
-
how did you manage to undo those fastners?
-
Nothing more complicated that two other pliers and a steady grip. :D
-
Here’s a few of mine – nothing fantastically complicated mind you. This is like playing with lego compared to some of the boffins on here :D I noticed that mod’s seem to have to be given names which I find quite chucklesome, so I put my tongue firmly in my cheek when naming these:
<u>Gerber DEsTroyer</u>
Simply a 600 DET with the crimping pliers swapped out for the heads off a Paul Chen Multitasker
<u>Leatherman Diet Wave (or Wave Lite)</u>
Take a standard Wave and remove all the internal tools
<u>Leatherman Roundhouse (an Awesome Kick)</u>
Using the removed innards from the above Wave and an awl ground from one of the drivers
<u>
SOG P4 (Perfect Pocket Power Plier)</u>
Details here (LINK)
-
Can't recall whether I've seen your Roundhouse before Al, but it looks like it would be quite handy for doing tasks in "public" areas.

(great name too by the way!) :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
