What Did You Use Your Multitool For Today?
-
Let a security guard use my Micra to cut off a security label, then used the Squirt bottle opener to open a weiss beer (takes two goes :( ), then used the Juice opener to open another Weiss beer (different beer brand, the opener works well :) ), then used the micra opener to open another alcoholic beverage (no problems here)... things might get a bit blurry from here onwards..
the opener on the Squirt really is poor, isn't it. ::)
I love the P4.
I also wish to see a P-Micra! =o =)
agreed. its better than nothing I guess....well maybe.
the one on the micra works betteragreed. The screwdrivers are better too. Such a shame LM never did a pliers version of the Micra IMO. :-\
-
used the waves phillips bit to do the usual battery fitting on gorgias birthday monday :D used that phillips a lot recently, mainly at work,it makes me laugh as something needs a tool and the girls i work with always look at me and laugh, knowing i have the tool for the job :D actually could be my mind but it all sounds a bit rude ::)
-
@Zed said:
knowing i have the tool for the job :D actually could be my mind but it all sounds a bit rude ::)In the (approximate) words of a Bob the Builder song “ Don’t go blaming the toolbox, you need the right tool for the job”. :D
All I seem to use lately are the bottle openers, the one on my SRM 763 was used by many last Sunday..

-
fixing a standlight. During a move I lost the retainer clips and screws. Made a few out of copper, drilled with an awl, bend with the pliers, and screw in with the drivers. I had to use metal cutters to get the strips, but since copper is quite a maleable metal, it wasnt too much of a chore.
-
Used my Atwood Roid Rench to scrape crud off of a rim while changing a tire on the 10 foot batwing mower.
Then used my Atwood Roid Rench to press in the rubber grommet end of an air hose on the Ducati.
Almost forgot! opened a couple beers with too!
-
I used the blade on my CS4 to scrape a terrazzo floor to see if all of the sealer had been removed. Now I need to touch up the edge on the blade.
-
In the past couple of days, I used the Supertool bottle opener (worked well) and the Juice philips screwdriver (worked OK, but the screw´s head was too worn to unscrew easily).
I have also used the above mentioned tools to cut paperclips, for no practical reason. On the supertool the stranded wire cutters worked better than the hard wire cutters, for that purpose. -
Just used my Skeletool to open a Pizza

-
Just used my Cadet to open a beer.

-
Having deliberately bought some small,* 250ml*, bottled beers I continued my testing, without worrying too much about the amount of beer I will have to consume.
Used the bottle opener on an RR scout knife (worked ok, a bit slippery), the micra again (works very well) and a victorinox (Best I have used so far).... I have also used extensively the bottle opener on the SRM 763, simply because it is always available when the knife is closed (works well with some practise).
-
I used the knife blade on my PST to cut a caterpillar in two that was eating up a pumpkin plant.
-
I'm glad to see we are using our tools for the serious things in life

Pizza
Beer
Caterpillars:D
-
I disassembled my Glasses with my Blast's small bit driver. Worked like a charm. I really needed to clean them and that tool is all I have that will do the job.
-
Used the small screwdriver that sits in the corkscrew of my SAK to repair my glasses.Now I can see again :ahhh Steve
-
Used the awl on a BO Swisstool Spirit to dig out a broken shelf bracket, and later to clean out the skank left behind when a battery leaked in a ceiling projection clock. Seems like I use the awl more than anything. The BO Spirit has been my EDC for a good while now.
-
@powernoodle said:
Used the awl on a BO Swisstool Spirit to dig out a broken shelf bracket, and later to clean out the skank left behind when a battery leaked in a ceiling projection clock. Seems like I use the awl more than anything. The BO Spirit has been my EDC for a good while now.I also own a BO spirit.
Its one of my favorites of all time.the BO wearing yet? =)
-
Yesterday, we were out on a trail ride. One of the horses picked up a stone. I used my Leatherman Kf4 pliers as a hoof pick and cleared the rock out. Then a few miles later, I cut a low hanging branch (at clothlining height) out of the way with the Kf4 saw.
-
Fixed a leaky Emergency Air Line on the Converter Gear Saturday Morning..Leaking right at the Ferrule..Used my Rescue Tool to make a clean cut in the hose, then used the Screwdriver Blade on same to pry ends up on ferrule to reuse..Put the ferrule back on tightned everything back up with a pair of Vise grips and on my way back to the yard where a regular mechanic can replace with new ferrule
Dtrain
-
@New_World said:
the BO wearing yet? =)The black oxide on my Spirit has been very durable, though I also like the look of some well-worn black oxide.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login