What Did You Use Your Multitool For Today?
-
Just used my Cadet to open a beer.

-
Having deliberately bought some small,* 250ml*, bottled beers I continued my testing, without worrying too much about the amount of beer I will have to consume.
Used the bottle opener on an RR scout knife (worked ok, a bit slippery), the micra again (works very well) and a victorinox (Best I have used so far).... I have also used extensively the bottle opener on the SRM 763, simply because it is always available when the knife is closed (works well with some practise).
-
I used the knife blade on my PST to cut a caterpillar in two that was eating up a pumpkin plant.
-
I'm glad to see we are using our tools for the serious things in life

Pizza
Beer
Caterpillars:D
-
I disassembled my Glasses with my Blast's small bit driver. Worked like a charm. I really needed to clean them and that tool is all I have that will do the job.
-
Used the small screwdriver that sits in the corkscrew of my SAK to repair my glasses.Now I can see again :ahhh Steve
-
Used the awl on a BO Swisstool Spirit to dig out a broken shelf bracket, and later to clean out the skank left behind when a battery leaked in a ceiling projection clock. Seems like I use the awl more than anything. The BO Spirit has been my EDC for a good while now.
-
@powernoodle said:
Used the awl on a BO Swisstool Spirit to dig out a broken shelf bracket, and later to clean out the skank left behind when a battery leaked in a ceiling projection clock. Seems like I use the awl more than anything. The BO Spirit has been my EDC for a good while now.I also own a BO spirit.
Its one of my favorites of all time.the BO wearing yet? =)
-
Yesterday, we were out on a trail ride. One of the horses picked up a stone. I used my Leatherman Kf4 pliers as a hoof pick and cleared the rock out. Then a few miles later, I cut a low hanging branch (at clothlining height) out of the way with the Kf4 saw.
-
Fixed a leaky Emergency Air Line on the Converter Gear Saturday Morning..Leaking right at the Ferrule..Used my Rescue Tool to make a clean cut in the hose, then used the Screwdriver Blade on same to pry ends up on ferrule to reuse..Put the ferrule back on tightned everything back up with a pair of Vise grips and on my way back to the yard where a regular mechanic can replace with new ferrule
Dtrain
-
@New_World said:
the BO wearing yet? =)The black oxide on my Spirit has been very durable, though I also like the look of some well-worn black oxide.
-
I've used my new SS Skeletool today...
I have a small garden behind my house where I'm trying to produce some organic vegetable for my family... Today I've made a irrigation system "drop-by-drop"....
So Skele cutted some hoses, wire, plastic... Etc... It worked like a charm!! Only one thing I'd change CE for PE, I like that one more, so anyone have spare 154CM blade from CX??
:DThanks Crouton!!
-
Used the tweezers on my LM Style CS to remove several small ticks on my dog.
-
Grabbed a couple of Jamo 38 speakers from the carboot sale. Knobs on the back had broken away so used my Special Mechanic's pliers to tighten them instead. They were just big enough.
A quick test told me that, although they look like they've been dragged through a hedge backwards, they indeed were a proper bargain for three quid :D

Sorry about the jerky vision shot :-[
-
I used the Pliers on my SwissChamp to cut some garden wire as I repaired the Wifey's Patio Umbrella.....
-
Used powerlock awl as a scribe to mark aluminum and then after cutting used the file to clean up the rough edges. Then used the awl again to make starter holes for my drill bit.
Used the pliers to push and pull a needle to repair some leatherwork.
Finally used the pliers to take care of a wayward nose hair.
All in a days work in my fabricating workshop a.k.a kitchen table. -
after landing a job (finally!!!), we needed to remove a small sign from an office to change it for a notice that the office was to be realocated. The screws were torx, so they had to actually go look for them. I happen to have my EDC bit kit with me (aside from my Skeletool and bit extender), and I took it out in a flash, scoring a few brownie points on the way.
-
@El Rago said:
after landing a job (finally!!!), we needed to remove a small sign from an office to change it for a notice that the office was to be realocated. The screws were torx, so they had to actually go look for them. I happen to have my EDC bit kit with me (aside from my Skeletool and bit extender), and I took it out in a flash, scoring a few brownie points on the way.leatherman saves the day! =)
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login