Farmer with scissors and no gap
-
Don't think I won't. >:D
-
@bushidomosquito said:
Don't think I won't. >:DYou dont have a hair on your chest if you dont. :P

-
Don't think I won't. >:D
You dont have a hair on your chest if you dont. :P



-
@bushidomosquito said:
Frankly, if you do the cost benefit analysis somebody could design a 93mm scissor backspring, have a buttload of them water cut and finish them in a mass media tumbler at around $3 each. They would sell for around $20 when guys will buy a 30$ knife just to get a part they want. And why stop there? Alox backsprings for pliers, magnifier and phillips driver, Cybertool driver. Hell, just go ahead and imagine an Alox Workchamp. This could be a nice little business for someone. Don't make me do it. I've already got enough on my plate.That would be very cool. Now let's find a volunteer!
By the way, how about using a scissors & long nail file layer? Of course, the long nail file would still be too short for the 93mm frame, but perhaps it would be easier to make that specific spring fit? The liners would need extra pivot holes for the nail file.
-
:D So go ahead and make some nice backsprings!
May I have one or two please? I'm fed up with grinding! >:( :D
-
I'll take 2 also. And while you're at it make some file, inline screwdriver/mag glass, and saw back springs.
-
You gotta be kidding me, right?
I'm still having nightmares of me with a file and enless grinding incompatible backsprings :ahhh :ahhh :D -
No I'm not joking. Lol. It would make sense for bushido to make them all for us :)
-
Well I hate to disappoint, so I may have a better idea. I'm thinking about an aluminum or stainless tweezer and toothpick holder to fill that gap. I just took my super tinker and lifted the hook, which BTW is not nearly as useless as everyone seems to think if you like to tie and untie paracord, and the toothpick and tweezers fit perfectly back to back in that gap. Their heads make a nice little half circle and the spring tension of the tweezers holds them both in very securely and you have to pull both out to use either but it's much better than not having them at all. It's one of those things that's beautiful, like it was just meant to be.

On the Super Tinker the split ring loop is in the way of pushing them all the way in. Is that a problem with the Alox? Could someone with a gap back scissor Alox stick a tweezpick in there and put up a photo? Hell, if it works I could make one in 20 minuets and send it to the next person that's poised to put scissors in a Farmer just so I can be the guy that brought tweezers and toothpicks to the Alox.


-
The idea is brilliant but personally I couldn’t care less for those small and flimsy twizers and that huge toothpick. However the toothpik is great for my german shepherd! :D :D
Come on mate go ahead and make us some nice backsprings. I have the patent of the design so mine will be free of charge, don’t you forget that! ::)
-
Thanks for the help Harryf3. Now it's my turn. I am making a pioneer with scissors for a friend. This thread helps a lot.

-
Cheers Steven
What kind of backspring will you use for the scissors? -
Old style solid with no cutout. Just like the one you had.
-
That's great mate! Wish you a happy grinding :D >:D
-
Well that was not as bad as I thought. I drilled the hole with just a tini coated bit. Then widened the scissor hole with a diamond burr....hehe cheated there a little. I have a variable speed bench grinder with 42 inch belt so not that much grinding here :D . I made a liner so I didn't have to butcher another one and now its almost done. I have one question for harryf3. Did the scissors hit the liners? I reversed mine so that they sit the same way with blade and now they don't hit the liners.
-
Looks like you did a geat job Steven. We need pics of the backspring alone and the assembled knife.
I prefer the scissors to be opposite to the blade.
If the scissors hit the liners then something is not straight. The pivot hole, the part of the backspring on which the scissors are turning when you open or close them (there is much contact and friction there and maybe it has an angle/edge created from not straight gringing) or you have a bent pin.
If you do not have much snap on the last assembled tool-layer then you need to make pins with bigger heads and conic shape under the heads. The pins should not move or make an angle with the scale when you start assembling the layers or you end up with a last layer with little snap or no snap at all or/and the tools will hit the liners or touch each other and this will not allow them to move free.
cheers atb Aris
-
Sorry for the necro, but I've read this thread 10 times, and I can't tell where the donor backspring that Harry modded with the new hole came from. What knife was this backspring from before?
-
@RX-79G said:
Sorry for the necro, but I've read this thread 10 times, and I can't tell where the donor backspring that Harry modded with the new hole came from. What knife was this backspring from before?You mean the one that became the scissor spring in the new Alox knife? It was originally a pre-hook 91mm scissor spring.
-
Rather than reinvent the wheel, wouldn't it now be easier to get a Pioneer-X and add a saw layer? Making that backspacing might be more expensive and time consuming than buying and modding a Pioneer-X and Farmer.
Either way, good luck.
-
Sorry for the necro, but I've read this thread 10 times, and I can't tell where the donor backspring that Harry modded with the new hole came from. What knife was this backspring from before?
You mean the one that became the scissor spring in the new Alox knife? It was originally a pre-hook 91mm scissor spring.
Ah, thank you.
Is that older style at all common on the used market?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login