Leather back quiver.
-
Time for the next series of photographs. I am now taking the rest of the day off. Wow. Backgrounding was time intensive...but I think it will be worth it when the project is done.
First up, here you can see that I am in the process of now beveling the inside details. You can see in the photo that I am now using a smooth beveler for this as previously mentioned.

Beveling the insides does bring out the design a lot more then what this photograph shows. Yay, I am now finished all the beveling work.

The next step is time intensive, but it adds even more detail and will bring out the foreground a lot for that added pop. Not to mention that it should darken when I stain the piece on a later date.
My favorite background tool is tiny. It allows me to get into small nooks and crevices. It does require a lot of patience to stipple a large area though. I have larger background tools, but this one is the one I like to use the most. In this photo, you can see just how small the tool is, and also what it does to the leather. For this project, I only used this tool.

Time rolls on...

And after a few hours of hammering away, the finished product for today.

Well tomorrow will bring in some more activity on the quiver. I still am unsure what I will use to lace/sew/rivet it up. Haven't even thought about the bottom piece, but I do have some ideas on that bouncing around in my head.
Who knows where this project will take me, or how it will turn out. I just hope I don't mess it up. I have too many hours invested in this to restart. :D
-
That looks INCREDIBLE!!!!

-
Thanks. Finished for today, but not done yet. I still have to add more detail to it.

-
Chako, you are truly a man of the seven trades**!
** that's a local expression for someone who does nicely a variety of stuff.
-
looking good Dan.

-
Thanks for the kind words. :-[
-
I did a little more. I do really want to finish this as quickly as possible.
I thought about how I was going to sew this up, and came up with the idea to use a tool I bought years ago but never had the opportunity to use.
Now that I have used it, I wonder why I never did before. This worked quickly and efficiently in punching holes for sewing. In using this, I bypassed using a stitching wheel to evenly mark the leather, and an awl to individually punch each hole.

Well at least I now have all my holes punched for sewing.

And here is a sneak peak of what it will look like later on shape wise.

-
Excellent craftmanship Dan..

-
Wow, that looks good!
So, you do this just for fun or do/did you do this for a living? It looks very professional!
-
That is very impressive Chako 8) 8) 8)
.Never mind the leather work I wish I could simply draw :( :( :D :D
-
<---self taught hobbyist here.
-
Well first thing this morning, I went upstairs to do a little more on the quiver.
First thing, I wanted to work on the top shoulder strap some. I am going to deal with the straps as I do with a belt. I round the edges using an edger tool. They come in various sizes. For small work, I like to use my smallest size. It is just enough to round those edges for comfort.

I run the edger front and back shaving all edges.

I have found that a round hole just plain sucks for a belt buckle bar to pass through. I invested in a set of oval hole punches. After edging the piece, I will then punch holes for a fancy belt buckle I have in mind. First step is to wet the leather. Afterwards, using a ruler, mark 1" increments. Center the mark with the oval hole punch and strike with the heavy maul.

That is starting to look good.

I think I will leave the belt free of decorations, except for an understated line that should pick up the dye and give it a subtle two tone effect. I use a saddle makers groover. It is adjustable and you simply run it along the edge and the cutting part will take out a little leather. Does a nice job.

Next step and possibly my final step for the day. I have to think through on how I am going to fashion a base for the quiver. I figure it will be a bear to sew at that. Anyhow, I use some Antique gel dye with a wool dauber. I rub the dye into the leather using circular motions, and then quickly run over it with a wet sponge. The nice thing about dying leather, it picks up all the natural grains of the leather. You just never know what it will look like until you dye it. Looks like that labour intensive backgrounder tooling accomplished exactly what I wanted. This photo was taken during the dying process. After this, I kept applying dye to make everyting nice and even. It turned out great if I do say so myself.

-
thats stunning work chako
you have skills my friend 
-
Loving this thread Dan, keep up the good work.

-
Thanks. I am at a standstill right now thinking about what to do for that bottom piece.

I have a few ideas on that, just wondering what is the best way to go.
-
chako what is the cost of the tools and wear do you get your leather

-
I get my leather from a local Tandy leather dealer.
Here is Tandy's web site. They also sell a lot of the tools.
-
I think I may have figured out what I am going to do for the bottom.
I used a compass scribe to sort of measure the bottom, then I transferred the measurements to a wet piece of leather. I then increased that first measurement to make the lip that will be sewn to the bottom of the quiver.

Once I cut that out, I then cut the thickness off the sewn part. This should make sewing a lot easier, as well as eliminate that ridge that could ultimately prevent an arrow from going to the bottom. To do his, I use a skiver. I also use a V groover to remove some of the leather on the other side. This should make folding the leather a lot easier.

A dry fit and I think this should do it. Not sure until I start sewing it, but i hope it will be a good fit. The last thing to do is to put the maker's stamp. I had bought this large metal stamp a few years ago but never used it as I usualy tend to work on smaller items. I used a small metal alphabet set used to mark tools to sign my name and date. I must say, that looks nice. :D

While that is drying, I got to thinking about the hardware. I take a look at my extensive buckle collection and find the perfect buckle for it. This one even has a nice stone set into each piece.

With the hardware selected, it is time to take a look at the bottom strap. This needs the same treatment as that given to the upper half. Rounded edges, a design groove, etc... First up though, trim the one end using a special belt tip punch. These tools are handy because it is very difficult to get a belt tip shape just right by hand.

Dry fit the hardware once all of that is done.

Next up, dye the straps and bottom the same colour as the quiver. yes, that belt buckle set looks great on the dyed pieces. Note that simple groove, how it picks up the dye.

-
@Chako said:
I think I may have figured out what I am going to do for the bottom.I used a compass scribe to sort of measure the bottom, then I transferred the measurements to a wet piece of leather. I then increased that first measurement to make the lip that will be sewn to the bottom of the quiver.

Once I cut that out, I then cut the thickness off the sewn part. This should make sewing a lot easier, as well as eliminate that ridge that could ultimately prevent an arrow from going to the bottom. To do his, I use a skiver. I also use a V groover to remove some of the leather on the other side. This should make folding the leather a lot easier.

A dry fit and I think this should do it. Not sure until I start sewing it, but i hope it will be a good fit. The last thing to do is to put the maker's stamp. I had bought this large metal stamp a few years ago but never used it as I usualy tend to work on smaller items. I used a small metal alphabet set used to mark tools to sign my name and date. I must say, that looks nice. :D

While that is drying, I got to thinking about the hardware. I take a look at my extensive buckle collection and find the perfect buckle for it. This one even has a nice stone set into each piece.

With the hardware selected, it is time to take a look at the bottom strap. This needs the same treatment as that given to the upper half. Rounded edges, a design groove, etc... First up though, trim the one end using a special belt tip punch. These tools are handy because it is very difficult to get a belt tip shape just right by hand.

Dry fit the hardware once all of that is done.

Next up, dye the straps and bottom the same colour as the quiver. yes, that belt buckle set looks great on the dyed pieces. Note that simple groove, how it picks up the dye.

:o great job mate and thanks for the info, i found a site in the uk that does tools but there expensive :o
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


