Leather back quiver.
-
whew! I just finished sewing that bottom piece. What a bear.
-
The last update, as I am now officially done.
Well, sewing that bottom piece was somewhat difficult, It always is when you try to sew such different shapes together. I had some difficulty having the needles meet up with a few holes. Overall, it went better then I expected.
From doing a few purses years ago, I recalled that it was difficult to get the shape right on some pieces. I figured I would use 3 separate sewing threads to ensure it would turn out good shape wise. I divided the circle in half and sewed to the right with one pair of needles, and then sewed to the left with another pair of needles. I sewed one hole alternating from left to right until I got the other side. I went back over a few times and then used an X-Acto knife to cut the threads flush. Using the third piece of thread, I then sewed the flat part and tied it in with the side thread. I once again went back a few times and cut the threads flush. It is hard to tell that I used 4 pieces of thread to sew the sides and bottom together. I am a bit proud of how that turned out.
Here you can see the left and right pair of threads.

Yay! I am done. Party time!!! Oh wait, not quite finished yet. I still have a few things to make the quiver look a little better.

Time to whip out one of the skivers to clean up that bottom piece and also to run it along the sides to even out the two pieces that are sewn together.
Here you can see that I have trimmed the bottom piece so that it is flush with the other piece. Pardon the colours. My bounced flash is darkening the bottom piece, It is the same colour as the sides.

With both bottom and side trimmed. It is time to make those edges a bit more professional. Here is another nylon slicker that I use for odd shapes. Once again, wet the edges and rub furiously to even out the edges, and to also smooth it out.

Now for the final finish. I damp a sponge and gently rub it on some saddle soap until it lathers. I then coat and gently rub the soap into the leather. Wait to dry, and then gently rub with a soft cloth to give the end product a sheen. The saddle soap replenishes the natural oils that are taken out of the leather after repeated wetting and drying. It will also preserve the leather.

And the final product. I do have some proper feather fletched arrows, but they are buried deep at the moment. Some discontinued Easton Autumn Orange XX75 Aluminum arrows with Blazer vanes will have to do for the cheesy finished product shot. :D

This was a big project, especially seeing that I haven't done any leather work in such a long time. Nice to know I haven't lost it though. The feeling of accomplishment is great. Thanks for letting me bore you with the build details.

Now it is party time! My sore fingers demand it. :D
-
Glad to see it done mate, looks excellent.

-
I believe you could carry 2-3 dozen arrows in that quiver.
Thanks Gareth.

-
now I've seen a few quivers in my time, and I have a couple of cheapies and I'm sure their are some out there who do it all the time and have really nice ones but damn that is about the nicest one I've ever seen!

you did a great job! and great thread, step by step display! TY Chako!

-
Dan, you are a fancy, fancy man and I appreciate your sharing the details with us, a fantastic read. Nice photos as always!

-
Just Wow... 8)
Not the World Of Warcraft kinda wow you know... :D
-
OMG...the frog is back! :ahhh :D
I am not so sure on the fancy part. ;)
-
I feel inadequate. Not only can you do cool stuff like this..you also take much better pictures than I do.
I would have made an arrow quiver out of a couple of empty Pringles cans and a bunch of ducktape. Then I would have screwed up the pictures. :-\ :-\
-
@ducktapehero said:
I feel inadequate. Not only can you do cool stuff like this..you also take much better pictures than I do.I would have made an arrow quiver out of a couple of empty Pringles cans and a bunch of ducktape. Then I would have screwed up the pictures. :-\ :-\
That's better than me mate, I'd have had a polythene bag tied to my belt -
Pringle cans...that is rather ingenious actually. I have only made pinhole cameras out of those before.

-
-
Amazing craftsmanship Chako!
As always
-
Thank you.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
