Charge TTi = Useless
-
Well I guess that's one way to introduce yourself.

On a serious note i'm sorry to hear the trouble you have had with your Charge. I have to ask why you have not sent it in for warranty repair. I'm sure Leatherman would be more than happy to help you out. I also must ask if you hated your first one so much than why by a second?
-
@captain spaulding said:
Well I guess that's one way to introduce yourself.
On a serious note i'm sorry to hear the trouble you have had with your Charge. I have to ask why you have not sent it in for warranty repair. I'm sure Leatherman would be more than happy to help you out. I also must ask if you hated your first one so much than why by a second?
I should have specified...The second was a replacement.
I've had the original "Super Tool" for 15+ years with no problems, so I assumed the problem with the first TTi was an aberration.
-
@captain spaulding said:
Well I guess that's one way to introduce yourself.

On a serious note i'm sorry to hear the trouble you have had with your Charge. I have to ask why you have not sent it in for warranty repair. I'm sure Leatherman would be more than happy to help you out. I also must ask if you hated your first one so much than why by a second?
I should have specified...The second was a replacement.
I've had the original "Super Tool" for 15+ years with no problems, so I assumed the problem with the first TTi was an aberration.
Alright that makes more sense. That sucks that you are having problems with your Charge. I personally do not own one so I cannot comment on the functionality compared to yours. I think Leatherman should make sure there products are up to par before releasing them EXPECIALLY there more expensive models. I too have a Super Tool and love it. It has served me well and I actually just ordered another one as a backup.
-
@captain spaulding said:
@captain spaulding said:
Well I guess that's one way to introduce yourself.

On a serious note i'm sorry to hear the trouble you have had with your Charge. I have to ask why you have not sent it in for warranty repair. I'm sure Leatherman would be more than happy to help you out. I also must ask if you hated your first one so much than why by a second?
I should have specified...The second was a replacement.
I've had the original "Super Tool" for 15+ years with no problems, so I assumed the problem with the first TTi was an aberration.
Alright that makes more sense. That sucks that you are having problems with your Charge. I personally do not own one so I cannot comment on the functionality compared to yours. I think Leatherman should make sure there products are up to par before releasing them EXPECIALLY there more expensive models. I too have a Super Tool and love it. It has served me well and I actually just ordered another one as a backup.
I can comment on the functionality: I have a TTi and I haven't had any trouble with it at all after owning it for a few months (this includes some sand exposure). I think perhaps you've just had some bad luck with your charges. I would try sending it back in again and explaining the problem, and ask them to check it out and make doubly sure that they send you one with good working parts.
Really, the Charge series is in my opinion the top of the line Leatherman tools. I would be very surprised to hear that you got a third dud.
Don't lose faith just yet :P
-
Try sending a email to leatherman explaining the problems. That should ensure your next one is perfect. I have a tti which is my main (I have something to do) carry and it is perfect.
-
That does suck, im sure LM will sort you out, now and then we do here the odd QC issue about LM on here, me personaly have used LM's since 1998 and have never had any major issues, i hope this doesnt put you off what is normally a great tool :-\ oh welcome

-
My first Charge TTi was flawless. I used it for a couple years and then sent it in for warranty work when I wore all the diamond coating off the file. The one they sent back had a burr on the blade and scissors that were so bent that they wouldn't cut. I called them up, they sent me a prepaid envelope, and made it right the second time.
The handle problem you describe is unusual. There are "ramps" that engage to hold them open, and I have not heard of anyone having too much trouble with those. Unfortunately, i don't know that it's the kind of thing that you can fix without their warranty service.
-
Re: Charge TTi = Useless
Ouch! Leatherman's flagship... :ahhh
I got 2 TTis, 1 Xti and 1 ALX, all smooth and no problems.
Two Charges defective? That rarely happens
Send both in! -
Man sorry to hear of your troubles. I've had my Charge for a good while now, and it is the one I carry with me when I carry a multi. I have had zero problems with it, it is by far my favorite!
-
I also have a Chare ALX, and it works perfectly.
I'm sure that Leathermans customer service will help you out if you contact them.
Welcome to the forums by the way :) -
@PZ said:
On the second one I got this afternoon, one handle has already loosened so much that it has virtually no "locking" action. Making it about a 50/50 shot on whether the jaws will open or the handle will swing.I've lubed the hinge and even sanded and buffed the wire cutters with a Dremel...
POS.It's broke. That definately shouldn't happen. Send it back in.
-
I would tighten the handle pivots. Should cure your problem. :)
-
I think you would need to get it replaced because the issue would seem to be that the base of the pliers were ground too small so that they do not make enough friction with the handle to hold the handle in place.
My charge did not come perfect, in fact I had the exact opposite problem. My pliers were near impossible to open and close. I took some sand paper and carefully sanded the base of the pliers until eventually they worked smooth as butter.
-
Sending it to replace - you need to pay for shipping,then again,Leatherman send you something factory damage,and again you need to pay for shipping.
In finally your TTi will cost you a lot more. -
*The issue you are having with the loose handles is one I have encountered quite a few times, both on my personal mods (wave and surge) and also for mods for others. If only slightly loose, tightening the pivot bolt solves the issue sometimes. But sometimes you will find that in order to have adequate friction on the plier head, you have to tighten the pivot bolt so much that the outside implements no longer work smoothly. What I have done to remedy this is to install properly sized shims on the sides of the plier head. This makes it so you do not have to bear down on the bolts as tight while still applying friction to the plier head. Anyway, hope this helps.....
~ evil ~*
-
@CumminsDiesel said:
Sending it to replace - you need to pay for shipping,then again,Leatherman send you something factory damage,and again you need to pay for shipping.
In finally your TTi will cost you a lot more.That doesn't sound like the Leatherman we know ???
Don't they send prepaid envelopes to send faulty tools in when things go pear shaped?
I'm sure that if he explains his situation to them they will do everything they can in order to make it right
-
@threeme2189 said:
Don't they send prepaid envelopes to send faulty tools in when things go pear shaped?When the tool you've bought has an issue that requires warranty work, you foot the bill for shipping it to them. When the tool you've gotten from them as a warranty replacement has issues that make it unacceptable as a replacement you call them up and they send you out a prepaid envelope with which to return it.
At least, that was my experience. -
Sending it to replace - you need to pay for shipping,then again,Leatherman send you something factory damage,and again you need to pay for shipping.
In finally your TTi will cost you a lot more.That doesn't sound like the Leatherman we know ???
Don't they send prepaid envelopes to send faulty tools in when things go pear shaped?
I'm sure that if he explains his situation to them they will do everything they can in order to make it right
I didn't know about prepaid envelopes.
-
@PZ said:
I'm on my second one now...Both are so poorly made that the pliers jam closed constantly.
Either because the wire cutters are so rough that they jam up the tool, or because the handles "break in" after just a few minutes of playing around with it, and won't provide enough force to open the jaws of the pliers....On the second one I got this afternoon, one handle has already loosened so much that it has virtually no "locking" action. Making it about a 50/50 shot on whether the jaws will open or the handle will swing.
I've lubed the hinge and even sanded and buffed the wire cutters with a Dremel...
POS.All you need just explains your situation and the Leatherman send you a new,shiny tool.

-
@CumminsDiesel said:
Sending it to replace - you need to pay for shipping,then again,Leatherman send you something factory damage,and again you need to pay for shipping.
In finally your TTi will cost you a lot more.If the replacement Charge was less than satisfactory then I would bet that Leatheman would, somehow, eliminate any extra costs for sending them in.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login