Cheap and cheerful???
-
:sak:
@Death's Head said:
For your information, the Spyderhole has been AA registered trademark since Jan 1995.
Yet Spyderco was unable to stop Benchmade from using it in the Ally, Soldat, Vex or Pika series of knives because it was decided that it was an unenforceable trademark. The Soldat, Ally and Pika are still being produced and sold right now.
Thanks for proving my point.
No problem. I'm glad you feel I proved a point you had difficulty proving yourself. Just kidding buddy. :D
On the same token, the knifemaker Mick Strider has attained the license to use the Spyderhole on his customs which he does, but he refuses to use the Spyderhole on his productions because of trademark infringements, whether it can be enforced or not. I give Mick Strider respect for his decision on his usage Spyderco's hole. -
@Death's Head said:
For your information, the Spyderhole has been AA registered trademark since Jan 1995.
Yet Spyderco was unable to stop Benchmade from using it in the Ally, Soldat, Vex or Pika series of knives because it was decided that it was an unenforceable trademark. The Soldat, Ally and Pika are still being produced and sold right now.
Thanks for proving my point.
Wasn't there an out of court settlement / agreement between Spyderco and Benchmade?
-
@cerbera147 said:
Wasn't there an out of court settlement / agreement between Spyderco and Benchmade?They did for a while, but that agreement was annulled because Benchmade wasn't giving credit to Spyderco for for the Hole in literature. Didn't stop Benchmade from continuing to use it, though.
-
Has there been any release of any new models from Benchmade using the Spyderhole? I'm just wondering if an agreement was made for it's use with currently released models and no future releases from Benchmade.
-
Edit: Forget it.
-
@Gadget Guy said:
I used to be Peter's top five customer. He would make custom pieces for me and basically make anything I asked of him. He got to the point where he was simply too busy to do that for any of his customers and that was hard for everyone, especially me. I don't cry about it though. :'( Peter has been good to me and is a really great guy, but he cant please everyone. Peter is an artist first and a tool maker second.This hints at one reason I suspect some folks take umbrage at copied things: defenders against copying often have some kind of skin in the game, even if it's not tangible, like pride. I've seen this with other things, like knife designs and so on. It seems that the more pricey and exclusive ownership is, the more passionate the opinion over copies.
I realize yours is a passionately held position. But it does not strike me as particularly strong, as your case hinges on your personal moral authority, not on any particular damages perpetrated.
-
Awww, I'm in late on this party. Anyway, there is nothing patentable on an Atwood tool, literally nothing. :P
And as an artist, he should be able to sell his art despite similar products anyway.

-
@jekostas said:
The Navy tools all have their own branding applied quite clearly to them. There is no attempt to pass them off as Atwood tools. You give an "ordinary observer" an Atwood and the Navy tool and it would be easy for them to tell the difference.Well I had a strong suspicion this was wrong but figured since I had access to an expert I'd wait until I spoke with him. According to my friend you would just claim the shape of the object and not any surface treatment such as branding. So even though one tool said Navy and the other Atwood the only issue for determining design patent infringement would be whether the "ordinary observer" found the shape of the Navy tool to be substantially similar to the Atwood tool, and I think it's safe to say that Navy would lose this battle in court. Since there is no design patent on this tool this is all academic but it do think it worth noting that if an artist or designer is concerned with theft of their intellectual property they could obtain a design patent on their work for about $1000, less if they did it themselves. Utility patents on the other hand are very expensive and really need to be very carefully written by a smart and experienced patent attorney in order for the patent holder to be given good protection.
-
@jekostas said:
The Navy tools all have their own branding applied quite clearly to them. There is no attempt to pass them off as Atwood tools. You give an "ordinary observer" an Atwood and the Navy tool and it would be easy for them to tell the difference.Well I had a strong suspicion this was wrong but figured since I had access to an expert I'd wait until I spoke with him. According to my friend you would just claim the shape of the object and not any surface treatment such as branding. So even though one tool said Navy and the other Atwood the only issue for determining design patent infringement would be whether the "ordinary observer" found the shape of the Navy tool to be substantially similar to the Atwood tool, and I think it's safe to say that Navy would lose this battle in court. Since there is no design patent on this tool this is all academic but it do think it worth noting that if an artist or designer is concerned with theft of their intellectual property they could obtain a design patent on their work for about $1000, less if they did it themselves. Utility patents on the other hand are very expensive and really need to be very carefully written by a smart and experienced patent attorney in order for the patent holder to be given good protection.
You realize that the cases you posted earlier in this thread blatantly contradict the advice you just received from this attorney, yes?
The relevant quote would be:
"In so doing, the district court distinguished “the ornamental aspects from the functional aspects of Richardson’s design and then determined that an ordinary observer, after discounting the functional elements of Richardson’s design, would not be deceived into thinking that any of the Fubar tools were the same as Richardson’s Stepclaw.”
One is advice gotten over lunch from an attorney without knowing full facts of the case at hand, the other is on the books as a legal decision.
But, again, as you said this is all academic until Peter Atwood takes the necessary steps to attain design patents.
-
@jekostas said:
The Navy tools all have their own branding applied quite clearly to them. There is no attempt to pass them off as Atwood tools. You give an "ordinary observer" an Atwood and the Navy tool and it would be easy for them to tell the difference.Well I had a strong suspicion this was wrong but figured since I had access to an expert I'd wait until I spoke with him. According to my friend you would just claim the shape of the object and not any surface treatment such as branding. So even though one tool said Navy and the other Atwood the only issue for determining design patent infringement would be whether the "ordinary observer" found the shape of the Navy tool to be substantially similar to the Atwood tool, and I think it's safe to say that Navy would lose this battle in court. Since there is no design patent on this tool this is all academic but it do think it worth noting that if an artist or designer is concerned with theft of their intellectual property they could obtain a design patent on their work for about $1000, less if they did it themselves. Utility patents on the other hand are very expensive and really need to be very carefully written by a smart and experienced patent attorney in order for the patent holder to be given good protection.
You realize that the cases you posted earlier in this thread blatantly contradict the advice you just received from this attorney, yes?
Please explain
-
Did you actually look at the Fubar vs. the Stepclaw, there are some very obvious design differences.
-
Navy, being a Chinese company would likely not pay much attention to a cease and desist order from a US attorney or court, which is why the so called "protection" of a patent wouldn't be terribly effective. The last time I checked, the US legal system doesn't have any control over what goes on in China, despite what Hollywood would have us believe.
In a case like Atwood Vs Navy, chances are Peter would spend the money to obtain some kind of "protection" then spend more money to "enforce" it, and Navy would just giggle and keep on keeping on. The "protection" of a registered patent would really only end up costing (hurting) Peter who is already the victim in said claim, although his attorney would probably be quite happy to encourage him to take action.
As an investigator by trade I spent an awful lot of time and someone else's money trying to find ways of making things like this work, and they simply don't. Unless you have a lot of money backing you, you can't chase someone internationally, and that's even in a country that has agreements in place for things like patent law.
Def
-
Never mind Atwood vs Navy, I wanna see Navy vs Nate's Tractor >:D
-
That's not very far off I think. We have purchased one and it's on it's way to Nate's for a head to head with the real thing.
Def
-
Dumb question:
Am I the only one here that would consider buying an Atwood because of the maker/name, with the tool itself being a very distant secondary consideration?
-
Nope- I'd buy an Atwood based on name alone. Tragically when I see them available they are a little rich for my blood.
Def
Sent from my MB860 using Tapatalk
-
@Mr. Whippy said:
@50ft-trad said:
Never mind Atwood vs Navy, I wanna see Navy vs Nate's Tractor >:D
I have a few "tests" in mind...

Splendid :D :D I really hope the little feller does well
I'd expect to see it manage maybe 60-70% of what the Atwoood can do
I'd hate to see it bend or fracture on the "cleaning under the fingernail" test :-\ -
@turnsouth said:
Am I the only one here that would consider buying an Atwood because of the maker/name, with the tool itself being a very distant secondary consideration?That is because you are buying a piece of art. Art is something you put on the wall and smile at becuase wow, you have it, and owning that art makes you feel good.
A tool is, well, a tool. You use it to do things with. It gets dirty. It gets hot and cold and wet and muddy and scratched up and you don't freak out, you just break out the oil and maybe the steel wool.
Don't own an Atwood. Once he made tools. Now he makes art. Wish he made tools again and on a somewhat predictable pattern rather than his erratic dribs and drabs, then maybe I'd own a few Atwoods.
-
Am I the only one here that would consider buying an Atwood because of the maker/name, with the tool itself being a very distant secondary consideration?
That is because you are buying a piece of art. Art is something you put on the wall and smile at becuase wow, you have it, and owning that art makes you feel good.
A tool is, well, a tool. You use it to do things with. It gets dirty. It gets hot and cold and wet and muddy and scratched up and you don't freak out, you just break out the oil and maybe the steel wool.
Don't own an Atwood. Once he made tools. Now he makes art. Wish he made tools again and on a somewhat predictable pattern rather than his erratic dribs and drabs, then maybe I'd own a few Atwoods.
I use every single Atwood tool that I own. It may be art, but it works pretty good as a tool.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






