Cheap and cheerful???
-
@jekostas said:
The Navy tools all have their own branding applied quite clearly to them. There is no attempt to pass them off as Atwood tools. You give an "ordinary observer" an Atwood and the Navy tool and it would be easy for them to tell the difference.Well I had a strong suspicion this was wrong but figured since I had access to an expert I'd wait until I spoke with him. According to my friend you would just claim the shape of the object and not any surface treatment such as branding. So even though one tool said Navy and the other Atwood the only issue for determining design patent infringement would be whether the "ordinary observer" found the shape of the Navy tool to be substantially similar to the Atwood tool, and I think it's safe to say that Navy would lose this battle in court. Since there is no design patent on this tool this is all academic but it do think it worth noting that if an artist or designer is concerned with theft of their intellectual property they could obtain a design patent on their work for about $1000, less if they did it themselves. Utility patents on the other hand are very expensive and really need to be very carefully written by a smart and experienced patent attorney in order for the patent holder to be given good protection.
You realize that the cases you posted earlier in this thread blatantly contradict the advice you just received from this attorney, yes?
Please explain
-
Did you actually look at the Fubar vs. the Stepclaw, there are some very obvious design differences.
-
Navy, being a Chinese company would likely not pay much attention to a cease and desist order from a US attorney or court, which is why the so called "protection" of a patent wouldn't be terribly effective. The last time I checked, the US legal system doesn't have any control over what goes on in China, despite what Hollywood would have us believe.
In a case like Atwood Vs Navy, chances are Peter would spend the money to obtain some kind of "protection" then spend more money to "enforce" it, and Navy would just giggle and keep on keeping on. The "protection" of a registered patent would really only end up costing (hurting) Peter who is already the victim in said claim, although his attorney would probably be quite happy to encourage him to take action.
As an investigator by trade I spent an awful lot of time and someone else's money trying to find ways of making things like this work, and they simply don't. Unless you have a lot of money backing you, you can't chase someone internationally, and that's even in a country that has agreements in place for things like patent law.
Def
-
Never mind Atwood vs Navy, I wanna see Navy vs Nate's Tractor >:D
-
That's not very far off I think. We have purchased one and it's on it's way to Nate's for a head to head with the real thing.
Def
-
Dumb question:
Am I the only one here that would consider buying an Atwood because of the maker/name, with the tool itself being a very distant secondary consideration?
-
Nope- I'd buy an Atwood based on name alone. Tragically when I see them available they are a little rich for my blood.
Def
Sent from my MB860 using Tapatalk
-
@Mr. Whippy said:
@50ft-trad said:
Never mind Atwood vs Navy, I wanna see Navy vs Nate's Tractor >:D
I have a few "tests" in mind...

Splendid :D :D I really hope the little feller does well
I'd expect to see it manage maybe 60-70% of what the Atwoood can do
I'd hate to see it bend or fracture on the "cleaning under the fingernail" test :-\ -
@turnsouth said:
Am I the only one here that would consider buying an Atwood because of the maker/name, with the tool itself being a very distant secondary consideration?That is because you are buying a piece of art. Art is something you put on the wall and smile at becuase wow, you have it, and owning that art makes you feel good.
A tool is, well, a tool. You use it to do things with. It gets dirty. It gets hot and cold and wet and muddy and scratched up and you don't freak out, you just break out the oil and maybe the steel wool.
Don't own an Atwood. Once he made tools. Now he makes art. Wish he made tools again and on a somewhat predictable pattern rather than his erratic dribs and drabs, then maybe I'd own a few Atwoods.
-
Am I the only one here that would consider buying an Atwood because of the maker/name, with the tool itself being a very distant secondary consideration?
That is because you are buying a piece of art. Art is something you put on the wall and smile at becuase wow, you have it, and owning that art makes you feel good.
A tool is, well, a tool. You use it to do things with. It gets dirty. It gets hot and cold and wet and muddy and scratched up and you don't freak out, you just break out the oil and maybe the steel wool.
Don't own an Atwood. Once he made tools. Now he makes art. Wish he made tools again and on a somewhat predictable pattern rather than his erratic dribs and drabs, then maybe I'd own a few Atwoods.
I use every single Atwood tool that I own. It may be art, but it works pretty good as a tool.

-
Am I the only one here that would consider buying an Atwood because of the maker/name, with the tool itself being a very distant secondary consideration?
That is because you are buying a piece of art. Art is something you put on the wall and smile at becuase wow, you have it, and owning that art makes you feel good.
A tool is, well, a tool. You use it to do things with. It gets dirty. It gets hot and cold and wet and muddy and scratched up and you don't freak out, you just break out the oil and maybe the steel wool.
Don't own an Atwood. Once he made tools. Now he makes art. Wish he made tools again and on a somewhat predictable pattern rather than his erratic dribs and drabs, then maybe I'd own a few Atwoods.
**I use every single Atwood tool that I own. It may be art, but it works pretty good as a tool. **

I agree John. All but one of my Atwoods have been used. I havent used the Rainbow Perfbaby yet.
-
Am I the only one here that would consider buying an Atwood because of the maker/name, with the tool itself being a very distant secondary consideration?
That is because you are buying a piece of art. Art is something you put on the wall and smile at becuase wow, you have it, and owning that art makes you feel good.
A tool is, well, a tool. You use it to do things with. It gets dirty. It gets hot and cold and wet and muddy and scratched up and you don't freak out, you just break out the oil and maybe the steel wool.
Don't own an Atwood. Once he made tools. Now he makes art. Wish he made tools again and on a somewhat predictable pattern rather than his erratic dribs and drabs, then maybe I'd own a few Atwoods.
**I use every single Atwood tool that I own. It may be art, but it works pretty good as a tool. **

I agree John. All but one of my Atwoods have been used. I havent used the Rainbow Perfbaby yet.
Wow, somebody actually agrees with me in this thread! :D
-
[quote author=turnsouth link=topic=30855.msg516764#msg516764 date=1315488649]
Am I the only one here that would consider buying an Atwood because of the maker/name, with the tool itself being a very distant secondary consideration?That is because you are buying a piece of art. Art is something you put on the wall and smile at becuase wow, you have it, and owning that art makes you feel good.
A tool is, well, a tool. You use it to do things with. It gets dirty. It gets hot and cold and wet and muddy and scratched up and you don't freak out, you just break out the oil and maybe the steel wool.
Don't own an Atwood. Once he made tools. Now he makes art. Wish he made tools again and on a somewhat predictable pattern rather than his erratic dribs and drabs, then maybe I'd own a few Atwoods.
**I use every single Atwood tool that I own. It may be art, but it works pretty good as a tool. **

I agree John. All but one of my Atwoods have been used. I havent used the Rainbow Perfbaby yet.
Wow, somebody actually agrees with me in this thread! :D
[/quote]In more ways than one John. :D
-
@turnsouth said:
Dumb question:Am I the only one here that would consider buying an Atwood because of the maker/name, with the tool itself being a very distant secondary consideration?
Oh there are tons of other people just like you, how else could apple sell so many iphone/pads? :D
-
Hmmmm...
The ebay auction listing this item abruptly ended this afternoon. Someone complained perhaps....
-
@frugalscotty said:
Hmmmm...The ebay auction listing this item abruptly ended this afternoon. Someone complained perhaps....
Or, you know, the auction just ended. This seller only lists stuff for 1 or 2 week auctions, not for a month. The auction ended at exactly 7
00PM PDT. It would be incredibly unlikely for a pulled auction to end on an exact minute mark, but incredibly likely if it was a scheduled start and end. -
Hmmmm...
The ebay auction listing this item abruptly ended this afternoon. Someone complained perhaps....
Or, you know, the auction just ended. This seller only lists stuff for 1 or 2 week auctions, not for a month. The auction ended at exactly 7
00PM PDT. It would be incredibly unlikely for a pulled auction to end on an exact minute mark, but incredibly likely if it was a scheduled start and end.OK, I didn't check the time. I thought there was like a week and a half left on the auction. There were over 20 pieces still available.
You're probably right though. Perhaps it will be relisted then.
-
Sooo....
Nate, how did the tool hold up?
John, I hope you are still with us.
Despite the arguments presented here, from an observers point of view this forum does not condone stealing and never has IIRC. We discuss LM knockoffs and SAK knockoffs, there is no difference in discussing Atwood knockoffs. I personally wouldn't ever buy a knockoff instead of the real thing, but that doesn't mean I'm not interested in how good a facsimile is if only for the curiosity factor.
I agree strongly with the Freedom of Speech that is allowed here, something we all use on a daily basis. We are a forum of MT intellectuals, not retailers.
-
Nate, how did the tool hold up?
Just picked it up from the post office today. (We don't get home delivery and have to get to the post office before it closes--missed last week due to tractor shopping).
My first observations are:
- It's much smaller than an Atwood with much lighter metal. I'm planning on testing them today (Saturday) and will report back.

- It's much smaller than an Atwood with much lighter metal. I'm planning on testing them today (Saturday) and will report back.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





