Charge Ti problem on Ebay
-
I dont blame the seller either. I didnt catch it and I usualy examine my knives and tools. I got this one and it looked good so I cleaned it up and put it away. It happens. I will keep mine. I kind of wanted a charge to mod anyway. I agree with davek. There is always one out there that will leave bad feedback for no good reason. Most problems can be worked out. But I do feel bad for her though because she will loose alot of trust.
I don't leave bad feedback unless it is extremely obvious that the seller is out to screw people or treats me like crap. I have had sellers respond to a complaint with a threat that if I leave negative feedback, they won't refund me. I have also had a seller tell me that I had to leave 5 stars on all items to get a refund. Why would I leave 5 stars for shipping when it took 4 and a half weeks to get here from one state over? anyhoo, this seller is not a bad seller, so I want to promote her as a great customer service representative for her account.
That is bs. I hate that crap. I went through the same feedback extortion w/the guy selling the fake Gerber DET's. We went back and forth for a couple weeks, but I got most of my money back, minus what it would have cost me to ship the items back to him cause I'd have to do it fully trackable and insured...$29.00 for express mail international! He then tried to reconsider when he saw I'd burned him in his feedback for trying to extort good ratings from me, but I already had the agreement in ebay messages and threatened to forward the whole conversation to ebay. They actually deleted his account anyway.
I'll never be forced to give positive feedback on principal alone. That just pisses me off. >:( >:( >:(
:DYea, that is just horrible. The problem with ebay is everyone and their dog becomes a retailer, and not everyone knows how to treat people. I always try to be as fair as possible with my prices, I don't ever make a profit because I am just selling stuff that I don't need. I will never understand people that try to get all 5 star feedback on every transaction no matter what. Isn't the point of feedback to inform buyers of what they can expect? If you have a poor shipping timetable, it doesn't matter that you refunded shipping because of it, you still had a poor shipping time. Good customer service after the fact shouldn't warrant a 5 star response in the affected area just because you made it right in the end. IMHO that is why we have this many issues on ebay in the first place.
Case in point: I bought a pair of Danner Striker II boots 2 years ago. The eyelets were made of plastic so they could be used for Security personnel passing through metal detectors. They kept breaking the backup ring that holds the eyelet in the upper, so when I tied the boots, the laces would literally wear a hole in the upper. I returned these boots 3 times before Danner came out with a Brass eyelet version. Should Danner get 100 % positive feedback? No. They should get a great Customer service score because they took wonderful care of me, but they had an issue with eyelets that caused me to have to send in my $160 boots in 3 times. They have fixed this issue, but as a consumer I am still wary of new products from them due to the issues I had. I feel that other customers should know this going in so they can know what to expect. Danner didn't tell me that I had to give them a good review, they were just concerned with making me happy. I wish the all ebay sellers would do a little reading about how any transaction should go.
Jen-jen did a fantastic job of taking care of me with this charge(well, when my money comes back, she will have) and I thanked her. I am still going to put 4 stars next to the item description accuracy because it wasn't what the ad said. That is just being honest.
-
Hi,
I know I'm opening an old topic BUT:
Today I recieved my Charge from the seller mentioned in this topic.
I think see fell back in old habitsUPDATE: She didn't, I'm offerd 3 options. I just wait for an answer for here who to get it operating smoothly:-
I cannot open the tool with one hand, as I could with my Wave which I unfortunately lost on Holiday.
-
All the tools 'scratch'if you open them. All are very very tied.
-
The name on the side say's Leatherman Charge, but it looks different from others. As if it is 'shaved' off.
-
All the nuts are of a different kind.....
-
it says in the tool 0711, on both sides.....
What do you speSmurfpillsts advise me to do?
Thanks,
Hiker
The Netherlands -
-
I've never had a problem with Jen-jen134.
In fact, I've purchased a total of 19 Charge TTis from her. All have been top notch and exactly how it was described.
She has some charge TI's for sale RIGHT now.
-
Thank you for your repley.
I've just had a mail from her and asked her how to get it to operate.
Maybe you know. My Wae (I sadly lost during holiday after having it for years) could be operated with one hand. With the Charge you have to use both hands to open it. And as you open the different knives you hear the scratch.
Do you know how to smoothen the tool?
thanks. I'll post some pics afterward
Update: Jen mailed back and offerd to ship a other one if I ship mine.) So no big deal.
Maybe I don't have to send as you guys here know how to get it operating. -
Picture 1.1 and 1.2: different screws??


Picture 2: The name is vague:

Picture 3: Genuine?


Thanks for the reply's. And as I believe is is genuine, but probably refurbished: how do I get it a smooth operating Charge (meaning: one hand operatable?)
-
@Metropolicity said:
I've never had a problem with Jen-jen134.In fact, I've purchased a total of 19 Charge TTis from her. All have been top notch and exactly how it was described.
She has some charge TI's for sale RIGHT now.
What do you do with 19 LM Charge?? :D ???
-
You are right about it being refurbished, they don't always come with identical pivot bolts. My sideclip came back with a few different types, but all are similar. That handle just looks as if it was milled about 10 thousandths deeper than the standard. As far as opening with one hand, a lot of Leatherman tools take a bit of time to get to that point, some can arrive so stiff that you literally break a fingernail opening a tool. Others come so loose that they don't stay closed. Good thing about Charge models is that you can tighten or loosen them yourself. Just remember to loctite the fasteners back when you are done. If you attempt this, I recommend sending a message to me or any number of users here to find out exactly how this is done so you don't damage your tool or it's fasteners.
As far as the grittiness, try working the tools individually under hot running water, then THOROUGHLY dry the entire unit and oil WELL. Leatherman tools WILL rust if you leave any water in them. Remember to use an Oil such as 3 in 1, not WD40. WD40 is a great de-gunker but it will actually cause a great collection of grit because it congeals in the tool if you leave it in. Use it only as a cleaner.
Good luck with your tool!
-
I've never had a problem with Jen-jen134.
In fact, I've purchased a total of 19 Charge TTis from her. All have been top notch and exactly how it was described.
She has some charge TI's for sale RIGHT now.
What do you do with 19 LM Charge?? :D ???
For mods, gifts, general no good :)
-
@Mercury said:
You are right about it being refurbished, they don't always come with identical pivot bolts. My sideclip came back with a few different types, but all are similar. That handle just looks as if it was milled about 10 thousandths deeper than the standard. As far as opening with one hand, a lot of Leatherman tools take a bit of time to get to that point, some can arrive so stiff that you literally break a fingernail opening a tool. Others come so loose that they don't stay closed. Good thing about Charge models is that you can tighten or loosen them yourself. Just remember to loctite the fasteners back when you are done. If you attempt this, I recommend sending a message to me or any number of users here to find out exactly how this is done so you don't damage your tool or it's fasteners.As far as the grittiness, try working the tools individually under hot running water, then THOROUGHLY dry the entire unit and oil WELL. Leatherman tools WILL rust if you leave any water in them. Remember to use an Oil such as 3 in 1, not WD40. WD40 is a great de-gunker but it will actually cause a great collection of grit because it congeals in the tool if you leave it in. Use it only as a cleaner.
Good luck with your tool!
If you have the right tools, you can accellerate the breaking process by undoing the pivot screws 1/8 turn at a time.
-

Where do I get the torx with the little whole in it?
What size of torx do i need?Tnx
-
Where do I get the torx with the little whole in it?
What size of torx do i need?Tnx
The fasteners are tamper-resistant Torx and the size is T10. Leatherman uses both six-pointed and five-pointed T10 Torx fastners (most of the new tools have six pointed). Amazon.com sells tamper-resistant T10 Torx drivers fairly inexpensively. Check your tool to see which one you have (six point or five point) and buy a pair of drivers.
-
I got a couple of sets at a discount hardware store. They usually come in 1/4" but sizes, but I also have a set of micro screw drivers that came with the Tamperpoof T10.
The 5 points, which you'll never run into if you are into Charges, can be bought on ebay for a pretty steep price. I got a set of for $15 and you'll need 2 sets to get the job done right. It's only because I have a few older Waves (maybe 2004 or so) and a couple of Original Waves.
-
@Metropolicity said:
The 5 points, which you'll never run into if you are into Charges, can be bought on ebay for a pretty steep price. I got a set of for $15 and you'll need 2 sets to get the job done right. It's only because I have a few older Waves (maybe 2004 or so) and a couple of Original Waves.Here's where I got mine five point tamper-resistant Torx drivers (2 drivers for $3.99 and free shipping on orders over $25):
Six point tamper-resistant Torx drivers:
-
@Metropolicity said:
The 5 points, which you'll never run into if you are into Charges, can be bought on ebay for a pretty steep price.Why is that? I've got a Charge with three 5 point and one 6 point on each handle. I figured it was refurbed before I got it however everything looked pretty well loved/used so I'm not certain.
Anyone know what year they made the change from 5 to 6 point?
-
I believe they switched over in early 06. I have a wave from 10/06 that has 6 point ones.
I could be wrong.
-
@Metropolicity said:
I believe they switched over in early 06. I have a wave from 10/06 that has 6 point ones.I could be wrong.
You aren't.
The switch from 5-point to 6-point torx screws occured in 2006. -
I have bought 2 Charges from this seller. One was in excellent condition, and one wasn't. The one that wasn't is described here /post/501815
My second had 3 6 point srews and one 5 point and it was very tightly adjusted. It was easy to fix. The mismatched torx styles is only annoying when you disassemble it.
This seller offers a good value for these used Charges for the most part as long as you don't expect a perfect tool.
-
I have one Charge Tti from jen-jen134 that was described as perfect and it truly was. Shipping was fast and I have no complaints.
The ones she is selling at the moment have this description: "THIS ITEM IS USED BUT IN EXCELLENT CONDITIONS MAIN BLADE HAS BEEN SHARPENED".
Has anyone here ordered a knife with this description? Can You post pictures of the resharpened blade? If these are manufacturer refurbished items the sharpening could be perfect and indistinguishable (or something less than perfect). What I am interested in is the looks, are they pretty enough to give as presents?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login