My impressions on the Leatherman Surge (Photos intensive)_Part 1 & 2
-
I have solved the problem on the pocket clip's sideways play:
/topic/25502 -
-
-
-
Thanks.
I would like to see a version with the ST300 type plier heads , and 154cm or S30V blade .
I agree with you in this regard. I would like both knife blades to be of a harder stainless steel. I would like the Supertool 300 pliers head. I would also like to make the scissors to be fitted via blade changer adapter, so that in case of emergency more options will be available. I also would like to see a bit keeping slot for the longer bit on one side - similar than the MUT.
I found mine a tad large for EDC , the Charge got all the love
I have replaced my Wave with the Surge as my EDC, and I do not care about the size. If the Wave hade the awl and the blade changer so that is was the same lay-out as the Surge, but just smaller, maybe I would not have bought the Surge. However I like the bigger pliers head.
-
-
Just noticed the post and saw them locking pegs on the blades. Never knew that safety feature existed. Yet on mine the blade thumb holes are thinner than yours and the pegs are still covered - so these are not engaging.
Have noticed an issue of where the serrated knife blade would wiggle back and forth when using the scissors and a while back Juli said there was some other issue - just don't recall what it was.
Doubt the locking peg would be connected to the scissors & blade wiggle issue (that I noticed) since the scissors are used when the pliers are inside the handles.After seeing your great photo showing that pet I played with the blades on my black oxide Surge. One side offers very little resistance and the straight blade can open with only a slight resistance. The serrated blade on the other hand does offer more resistance yet can still be opened with the pliers deployed.
So, wondering if I should send my Surge in for warranty work even though I haven't experienced any severed problems as of yet. ???
-
Took some comparison photos yesterday, and the Surge locking pins are definitely not engaging. The thumb notches are not wide enough to allow the pins to engage.
Charge TTi, Wave, Black Oxide Surge

Is this sufficient grounds to send it in?

-
-
-
Nice write up! I love my surge too but your ideas for improvement are spot on, ST300 plier head would be amazing. I've found on both my surges the wire cutters suffer once the plier jaws develop any play side to side with use. 154cm blades would be nice too, hence I bought a skele cx. Someone else had a thread started regarding the springs which hole the blades in while using the pliers but I have not had this problem, perhaps it has been addressed on the production end of things.
-
You <u>can</u> <u>use</u> the Removable Bit Driver with any Leatherman tool that has a Large Bit Driver via the 6mm x 1/4" double-ended bit. The Universal Tool Adapter is more rugged, heavy duty.
So there is a choice of two options.
Removable Bit Driver

Universal Tool Adapter

Removable Bit Driver using 6mm x 1/4" bit

Edit: Resized photos
-
-
-
Hi Jors,
Exemplary write-up! I agree, I have seen too many "reviews" that should really be called "overviews" or "unboxings." What the hell does anyone know about the tool the day they unwrap it?
Well, I do have sort of an answer. An emergency use or survival tool should not be of a design where the components easily fall or get lost .I knew - I just KNEW - a bit exchanger was asking for trouble. I have seen it in the advertisements, online, etc, and I wanted to stay away from this and the wave mostly because of the bit exchanger. If you have ever worked on your SUV with bit drivers instead of real screw drivers, then you know to plan on getting yourself dirty as you climb under the truck to retrieve a bit that slipped out of the driver.
The Surge is no exception to that rule. Against my better judgement, I bought a used Surge because it is otherwise robust, and I got it at a great price. It seems retention spring has become lost. I didn't realize that because I'm right handed and open the bit exchanger with my right thumb, which leaves the spring on the other side.
Without that stupid little spring, that one tool is useless. I do much prefer the multiple dedicated screw drivers of my original Super Tool.
The other thing that bugs me just a little is, why did they put that silly dollop of Zytel on the scissors handle? They could have ridged it out like on the back of the serrated blade. Even the PST ii scissors handle type is all metal.
Aside from those two issues, I submit that this is one rugged tool! I like it very much despite these two flaws, and am now trying to source a spring and some clear coat or epoxy to keep it in place.
-
@ThundahBeagle said:
Hi Jors,Exemplary write-up! I agree, I have seen too many "reviews" that should really be called "overviews" or "unboxings." What the hell does anyone know about the tool the day they unwrap it?
Well, I do have sort of an answer. An emergency use or survival tool should not be of a design where the components easily fall or get lost .I knew - I just KNEW - a bit exchanger was asking for trouble. I have seen it in the advertisements, online, etc, and I wanted to stay away from this and the wave mostly because of the bit exchanger. If you have ever worked on your SUV with bit drivers instead of real screw drivers, then you know to plan on getting yourself dirty as you climb under the truck to retrieve a bit that slipped out of the driver.
The Surge is no exception to that rule. Against my better judgement, I bought a used Surge because it is otherwise robust, and I got it at a great price. It seems retention spring has become lost. I didn't realize that because I'm right handed and open the bit exchanger with my right thumb, which leaves the spring on the other side.
Without that stupid little spring, that one tool is useless. I do much prefer the multiple dedicated screw drivers of my original Super Tool.
The other thing that bugs me just a little is, why did they put that silly dollop of Zytel on the scissors handle? They could have ridged it out like on the back of the serrated blade. Even the PST ii scissors handle type is all metal.
Aside from those two issues, I submit that this is one rugged tool! I like it very much despite these two flaws, and am now trying to source a spring and some clear coat or epoxy to keep it in place.
Fortunately I don't think it's the norm for the spring to not be secured. The zytel pad was on the older models. The newer models have an integral steel pad

-
Yeah, thanks, Wallace. Sounds like the new one is all that. I read so much about the salivating leading up to its release in autumn 2013. Still, I like this one. Good price. Want to get it fixed if possible
-
@ThundahBeagle said:
Yeah, thanks, Wallace. Sounds like the new one is all that. I read so much about the salivating leading up to its release in autumn 2013. Still, I like this one. Good price. Want to get it fixed if possibleTo be honest I don't think you're missing much by having the older model. I'm not convinced that the older pliers w/o replaceable cutters are drastically inferior.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
I like the idea of the scissors being run of the T shank adaptor lots .