Show off your Sak mod's!
-
Nice, basically a Champion sans fish tool and the backside
What happened with the scales?
-
Yup

Owner glued handles a kind of unfortunate glue and this was the result...I already put new one 8) -
Here is my new daily carry. It's a cross between an alox farmer and a 91mm explorer

I had to regrind the nail nick on the mag glass so it would sit low enough not to drag in the pocket. It took 3 try's to get the pins not to bend. But I finally got it.
-
Thats almost what im after. I want sissers and not the mag glass.. JR
-
I can do that. You can ask Sazabi. He has one I made for him ;)
-
Nice Steve! What backspring do you use for the mag/Phillips layer?
-
More great work going on in here

-
@bushidomosquito said:
Nice Steve! What backspring do you use for the mag/Phillips layer?To my surprise it was the regular thick spring from a pioneer. When I measured it I almost hit the floor. It was so close I couldn't believe it.
-
@tattoosteve99 said:
Here is my new daily carry. It's a cross between an alox farmer and a 91mm explorer
I had to regrind the nail nick on the mag glass so it would sit low enough not to drag in the pocket. It took 3 try's to get the pins not to bend. But I finally got it.
I wouldn't have reground the mag glass, you lost an opportunity for an emerson style tactical OHO mag glass, that opens as you pull it out of your pocket. Sherlock Holmes + Ninja. :D
-
Well I wouldn't have if it wasn't made of plastic. Maybe I'll upgrade it with a bushido special.

-
The only lenses I could find (after 4 stinking days of internet searching) that fit them perfectly are laser optics quality Schott glass and cost $37 each. Even with waterjet cut bezels I'll still have to assemble, fit (I have to cut a bit of an accommodating radius into the backspring because I make them slightly bigger) and polish them so I think it will be at least a $100 option on my knives. But I will have lots of the clear plastic ones for trade fodder.
-
yikes!
umm..
http://www.dealextreme.com/p/1-led-with-2-magnifiers-black-589
http://www.dealextreme.com/p/30x21mm-jewelers-loupe-magnifier-8186
have you looked into ones made for medium sized flashlight heads? They are often used to make 'throwers'
-
I had to have a very specific diameter and thickness to fit the envelope that the knife allows and I was afraid of how many loupes I'd have to buy to find one just right. I'm squeezing a 20mm lens in mine. I just used the same rule that applies to building a precision long range rifle, spend as much on the glass as the gun.
-
How about using part(s) of a fresnel lens?
-
Here's a thought. Try a gun sight made for a bb rifle. Daisy has them cheap.
-
Here's another option for getting the magnifier to fit in a 93mm with out sticking out too far.

It works better than you'd imagine as you can grab it from the sides.
Thinning out the backspring to allow an unmodified magnifier to fit would seem sensible but I'm not going there. Every time a backspring gets thinned there seems to be a follow up tale of woe about it snapping :ahhh I'm just not brave enough :D
-
@Neil said:
Here's another option for getting the magnifier to fit in a 93mm with out sticking out too far.
It works better than you'd imagine as you can grab it from the sides.
Thinning out the backspring to allow an unmodified magnifier to fit would seem sensible but I'm not going there. Every time a backspring gets thinned there seems to be a follow up tale of woe about it snapping :ahhh I'm just not brave enough :D
I was worried about the backspring snapping so I made the transition gradual and ground it slowly not letting it get past warm to preserve the temper. Then polished it back up to remove any stress points in the grind lines. Time will tell.
-
A mod Neil did for me is like that and it works great

-
Here is my mod built to my specifications by Neil B.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login