Evil's Inline Ratcheting Bit Driver
-
Great going on the mod there, Mike. Looks Identical to the Harbor Freight unit I sent to tattoosteve. He made one as well. Very similar to the unit I started off with. I ended up doing things the hard way since, at the time, I found nothing suitable. The HF unit makes for a great light-medium duty version

-
Wished I had the facilities and knowledge to make one too. That looks bonzer!
Can only hope that someone talented like y'all will offer them for sale or swap at some point in time. I looked at some cheap screwdriver ratchets at Home Depot then walked away. Never seen one with a dial chuck. The ones here seem to have a slide button to change directions, which ofter require whacking it against something so the lever inside "catches".
-
It's pretty easy to make if you have a harbor freight close by. Just get the finger ratchet and remove it. Then attach the quarter inch bit to it. Grind a little so it fits the bit holder on wave/multi and poof. Done.
-
@tattoosteve99 said:
It's pretty easy to make if you have a harbor freight close by. Just get the finger ratchet and remove it. Then attach the quarter inch bit to it. Grind a little so it fits the bit holder on wave/multi and poof. Done.I'd have to order one. Any recommendation(s) as to which model number? Mind a bit fuzzy today, got a bug last night... and had my flu shot just last week too.
-
Why yes I do.
This is the one I used. You will have to order it from amazon though. The quarter inch bit that comes with the kit is the one I used.
-
@tattoosteve99 said:
Why yes I do.This is the one I used. You will have to order it from amazon though. The quarter inch bit that comes with the kit is the one I used.
Thanks mate! Ordered one just now from Amazon. Not many of the rascals are left in stock. Probably won't be any more in stock soon! :D
-
HF has them on clearance for 3.99 and that includes bits.
Mike -
I would not mind doing a few but it is Evil's idea and i would not want to step on any toes.
Mike -
Got the finger drive in today. Guess I need to is a saw to free the ratcheting mechanism free since it is fitted into a hexagonal hole.


Couple of questions:
• Did y'all use one of the included bits for the shank, then grind that down?
• Did you happen to use some sort of adhesive to hold the bit onto the ratcheting mechanism, or leave it as friction fit? -
I just used the bit that came with it. 1/4 inch I believe just a friction fit for mine. It's pretty tight so tap lightly with the hammer. Free advice. Grind it before you attach it.
-
Popped the ratcheting mechanism out using the Crunch adjuster bolt (kept my original one) and a rubber mallet. :D
Will have to modify the shank with a Dremel tool later.
Thanks for the help Tattoosteve99.And more thanks to E510 for making it.
-
I coated the ratchet shank with some J-B Weld and taped it in the 1/4 nut setter as is. If you are going to grind the nut setter to fit the Leatherman flat bit holder do it before you attach to the ratchet.
Mike -
Used a Dremel tool, a few grinder bits, sander bit, and finally a polishing grit wheel.

Cut the sides to lock in the Large Bit Driver. Tested both sides out and the second cut was a tighter fit - so marked the shaft with four rough spots.

This will help find the best side for locking with the spring. Polished that down too.
Thanks MTO!! :D

-
We need pix!
Mike -
Mine aren't as sexy as Evil510's or the rest of the gang. Never thought of modifying or making stuff till I found this site. You know how many tools I've bought/traded for because of this highly informative site?? :ahhh
And I owe this infliction on one person... Juli Warner. She's the one that sent me here over a year ago... lil brat. And I thought she was giving me the hint... you know... get rid of me and my crazy tool ideas.
-
You did a nice job your driver and pix turned out nice.
Thanks,
Mike -
Not pleased with the quality of the ratchet. :'(
Was trying to put a screw in for a bracket when I had to apply firm pressure. The ratchet instead slipped. Now any time I apply even the slightest tightening motion is starts slipping instead. Put the switch in the center, does the same thing.
Yet untightening the ratchet seems unaffected, so far.Can see now why the things were on close-out.
Is it possible to disassemble this racthet and fix/replace whatever is slipping inside? Don't want to spent another $15 (item + shipping) to replace it.
Am a smurfin' miffed that the ratchet couldn't hold enough to tighten a screw into a pine toilet paper roll holder.
-
Do you want me to see if they have any more in the store they were 3.50. I think i can mail it to you for another 3.00. It is a lot cheaper than 15.00.
Mike
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
