carbon fiber and titanium Super Tinker
-
I think I've just had a trouser crisis!
-
Carbon scales with titanium liners, tweezers and toothpick. This one is put together like a Sebenza with phosphor bronze washers and the pivot pins of a precise length that the outer liners butt up against so the Torx screws can be torqued down. This leaves the tools in a consistent tension so you don't have to keep playing with the screw tension. The washers are all .005" except one next to the main blade which is .020" to make up for the stamped washer area of the stock aluminum liner.
I really love this one. It'd be my EDC if it weren't already sold.
If dont mind me asking how much do you charge for this one - understand if want to pm me if want to keep it private
Thanks
Richard
Maybe others want to know as well. To make a similar one without the ti tweezpick (what I refer to the both of them as) and the scales milled for standard Vic tweezpick would be $200. The ti tweezpick takes me about 5-6 hours to make and fit to the scales so they add $100 to the price. Lots of detailed finish work goes into those and the tweezers are longer, wider, have a precision ground tip and are much more useful as tweezers than the grey tipped Vics. A custom job on a SAK with the same number of tool layers would be the same plus the cheapest price that google shows me on whatever SAK you want it built on. I have to limit that to 5 layers. Polished G10 scales of any color are $20 less than carbon. This setup in full titanium with the tweezpick and bead blasted scales can get up to $500. Add the ishimi texture to ti scales and it's pushing $700. :ahhh But still in line with most custom knife prices.
-
Very nice work! I love the look of this one!
-
I would seriously consider to EDC a SAK with scales like that...

-
**Beautiful!! **

My SuperTinker desk knife can live next to Alox, but it is just a bit jealous of this one.
-
I love the carbon fiber scales. How's the price compared to G10? Are they a durable? Might have to add them to my WIP fixed blade.
-
bushidomosquito,
You really bring modding to a new level. The scales look amazing! I wish I had the skills like that.
Where did you get the screw posts? I would love to get a hold of a couple. Are they for sale?
-
@batjka104 said:
bushidomosquito,You really bring modding to a new level. The scales look amazing! I wish I had the skills like that.
Where did you get the screw posts? I would love to get a hold of a couple. Are they for sale?
The holy grail of knifemaker supply.
http://www.usaknifemaker.com/index.php?main_page=product_info&cPath=30&products_id=2604
They have all sorts of goodies under folder parts.And thank you and everybody else for the compliments.

-
Thanks for pointing me to this site. It does have a lot of nice stuff.
However, the barrel diameter is 1/8" = 3.2mm. Holes in SAK tools are 2.5mm. So, did you have to drill/enlarge holes in the tools?
-
Yep, I hone and polish the inner surface of the holes too and that's the biggest PITA of the whole endeavor, burning up $10 carbide drills every 10 tools or so. I'm thinking of switching over to Alox pattern only because the holes are 3mm and so much easier to drill out. Once I get a grinder with a green wheel to resharpen carbide it won't be so bad.
-
A newbie question:
Can 2-56 screws be utilized in SAK mods? They are pretty close in diameter to the pins. Of course, a regular nut will look ugly, but maybe a better solution can be found. This way the knife can be broken down and re-built at any time in any configuration.
-
2-56 is a bit small I think. 3-56 is perfect but it's just too uncommon to find anything useful. I also don't like the idea of tool pivots riding on threads instead of hardened pins. I've logged hours online looking for the perfect sak removable hardware and I think these barrel pins are it for strength and clean look from the outside. Someday when I can afford to have a bunch made I'll just go custom made.
-
Now you got me thinking...
Would brass tubing of 3/32" (2.4mm) diameter work? It has an inside diameter on .066" which can be tapped for 1-86 screws.
I found a place (smallparts.com) that sells this tubing.Just throwing it out there. I don't have the taps or anything, but this might be an option for yourself or some other skilled guys.
-
1-86 is really pushing it, especially with brass pins and aluminum liners. You have to consider the forces that the tools put on the rest of the knife when you use them. On something that's going to feel a lot of torque like the phillips and straight drivers there's a tendency to spread the liners and pop the peened heads of the brass pins through the bushings. With hardened thicker stainless pins that have a precise fit through titanium liners and the tools it acts more like a breaker bar on the tools. The torque is focused on shearing the pins much more than spreading the liners, and the screw heads are there more to hold the pins in place.
In other words, if you take a SAK with an unpeened torqued brass pin running through it and open the cap lifter to 90 degrees, clamp it in a vice and torque it the liners will spread and the pin will bend and shear off. Take one with the 1/8" stainless pins and ti liners with no screws in the torqued pin and do the same and it will snap the driver before the liners spread because you have a mini breaker bar running through that tool pivot and the liners are just a means to hold onto it.
-
I definitely see your point. I've always been afraid to put too much pressure on SAK blades and especially screwdrivers in fear I would spread and damage the knife.
Just trying to come up with a solution that doesn't involve drilling holes in tools. I've also thought about 13ga bicycle spokes. They are 2.34mm in diameter and one end is threaded already. The other end can be threaded as well. The nipples can be cut down to just the head part and screwed onto the threaded ends. Maybe that's more work than is worth it.
-
The Dragonplate carbon fiber is really tough stuff. If I didn't like orange so much I'd EDC CF scales. Weight difference is unnoticeable compared to G10 and they are very similar materials to work with so the price is only $20 less for G10.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
