What Did You Use Your Multitool For Today?
-
I just love when I get job done with my multi in front of 5-6 :o :o faces!!
Yesterday we started home from work in our truck (small pickup like truck - Russian made Gazelle) and check engine lit on board. so we got out and pop open the front to see. There were small rubber hose broke. I pulled out my CT41 and put the philips bit to unscrew clout http://www.alati.hr/web3/components/com_virtuemart/shop_image/product/__elna_4bbb27b70d6b3.jpg (this is from google translate
) but my coworker pulled out the hose and lost it.... So....

I found a peace of copper wire, cut it w/wire cutters, cut the bad peace of hose w/blade, put it on place and secure it with wire instead of clout. Put the wire arround hose and twist ends w/pliers untill it was tight enough.... :D :D
Let's get back on beginning, when I pulled out CT41 they all started giggling and poking me, but by the time I finished, they were all :o :o

-
My bandmate repaired his saxophone utilizing my Wave. There was a small spring that had popped out, and he used the pliers to put it back in its place.
-
@edcgear said:
I just love when I get job done with my multi in front of 5-6 :o :o faces!!Yesterday we started home from work in our truck (small pickup like truck - Russian made Gazelle) and check engine lit on board. so we got out and pop open the front to see. There were small rubber hose broke. I pulled out my CT41 and put the philips bit to unscrew clout http://www.alati.hr/web3/components/com_virtuemart/shop_image/product/__elna_4bbb27b70d6b3.jpg (this is from google translate
) but my coworker pulled out the hose and lost it.... So....

I found a peace of copper wire, cut it w/wire cutters, cut the bad peace of hose w/blade, put it on place and secure it with wire instead of clout. Put the wire arround hose and twist ends w/pliers untill it was tight enough.... :D :D
Let's get back on beginning, when I pulled out CT41 they all started giggling and poking me, but by the time I finished, they were all :o :o

did no-one in Serbia ever watch McGyver? :D Nicely done BTW.

-
I don't remember that show being broadcasted here....
I have heard of McGuyver here. And I've allways been a tech-gadged geek....

-
@jerseydevil said:
I left the house today without a multi on my belt, whoops! And, of course, I needed pliers several times today. Fortunately, it was all light duty work, and I had my Deluxe Tinker in my pocket! The pliers got their baptism of fire by pulling lid clips off several gallon cans, loosening and then tightening the cap on a tint machine nozzle, and, along with the Phillips, put together a display rack. That SAK certainly proved its' worth today!Tint machine, lid clips, those are familiar words. I spent 14 years working in our family's paint store before the days of color matching computers. It would have been very handy to have an MT on my belt.
-
I used my Explorer Plus' magnifier to read a couple tang stamps and to compare the lengths of a couple knives at an antique show today. Ended up getting a mint condition light aqua glass transformer globe... I could've gotten an excellent condition lavender one, though, for probably $35... I kinda regret not getting it. Still, it'd be a pricey paper weight over the $3 I have in the one I purchased. ._.
-
Code red emergency use today... Used scissors to cut hair from in front of my dog's eyes. Didnt want him to start running into stuff
-
Used my CS4 to open packets of hops for the batch of beer I was brewing.

-
@MeadMaker said:
Used my CS4 to open packets of hops for the batch of beer I was brewing.
Now that's what I like to hear.

-
I used my old wave yesterday to remove a bolt that holds a headlight in a car. We were fitting a bumper to the car to inspect the fender rework and hope it matched. So nice that our trained technicians don't show up until an hour after we open the shop and then whine about not getting cars completed in time. Seems that I spend more time along with the other shop managers just putting cars back together because our techs are lame.
-
Got the first part of my son's sound system installed in his car today. A Squirt ES4 did all of the wire striping, an ST300 did most of the screw turning, and plier work (this was shared some with a SwissTool RS, been trying to give it a "real world" work out, and I must say that the Phillips screwdriver did not disappoint
). Also had a Core there for some knife work. -
My Blast saw a lot of use today during the second phase of our house painting project. Today was Living room phase I. I masked off the larger portion of my living room and used the knife on my blast several times cutting plastic and paper, then used the screwdrivers to remove the outlet covers from my walls and then to replace them when I finished. Great day and the change in our lighting is incredible with our new paint.
-
Heres a good one. A stitch in my wifes mouth from dental surgery decided to pop out of her gum... Which freaked her out and grossed me out. Anyway, we had to stop driving and she had to use my LM Style scissors. Not all jobs are pretty
-
I cut some double sided tape with my DIY Gerber Shears for some tool chest liner for my Machinist Chest.
-
Are you a Tool and die maker Metro? I spent a bit of time a few years ago as a CNC Operator and Tool and Die apprentice. I need to get back to it somehow, my knowledge is getting rusty.
-
@Mercury said:
Are you a Tool and die maker Metro? I spent a bit of time a few years ago as a CNC Operator and Tool and Die apprentice. I need to get back to it somehow, my knowledge is getting rusty.No, but I am an Industrial Designer (product) I don't specialize in anything which means I've had to learn and dabble in most things mechanical and automated process related. I have thought about going into trade training to learn more about it, but my manual shop in my garage has served me well :)
-
I would love to have a manual shop. I do have a mini mill, but it's in storage at my uncle's foundry and he doesn't have time to snag it for me.
-
@Mercury said:
I would love to have a manual shop. I do have a mini mill, but it's in storage at my uncle's foundry and he doesn't have time to snag it for me.That's what I have. Only twice have I wished for a bigger mill. My mini lathe is the same case, only a few times I wished I had a larger swing.
The benefit of the small guys is they can be lifted from place to place. Which I do often.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login