PST
-
Pictures! (A moment of thanks for the reckless disposal of serviceable equipment by modern consumers!)
I've ordered some modifications to my PST, which requires sending some blades to the machine shop.
PST blades -
Is it usual only to have one washer?
After using various high-end Pliers, genuine vice grips, and other precision tools to carefully and meticulously round off the edges on the bolt/nut, I managed to open 'er up using Soon-to-be-Hawkchucker's SideClip
-
@Nomad said:
Pictures! (A moment of thanks for the reckless disposal of serviceable equipment by modern consumers!)I've ordered some modifications to my PST, which requires sending some blades to the machine shop.
PST blades -
Is it usual only to have one washer?
After using various high-end Pliers, genuine vice grips, and other precision tools to carefully and meticulously round off the edges on the bolt/nut, I managed to open 'er up using Soon-to-be-Hawkchucker's SideClip
We are told to use only the right tool for the job, but quite a number of tools work well for rounding off the the edges of Leatherman knurled screws.... :D

So don't leave us all hanging on the edge of our seats Nomad, what are these modifications you have on order?
-
Yeah we wanna know. :)
-
Mods have not happened.
I've got a Question - Does anyone know if any changes were made to the PST wire cutter area throughout production?
Could some folks with PSTs please show some pics of the wire cutters (not side on, but looking down on them from above with the plier jaws open)
(I'm wondering if mine are a funny shape, or have distorted with use)
-
No joy? I'll try to snap a pic of mine then, and you can jes tell me if yours be different.
-
Does this help at all?

Struggled to get the lighting right, so sorry about the shadow!
-
Not really, teh beh onneh.
Need to be looking straight down the jaws of the plier head, lengthways. -
I tried to take some then but couldn't get enough definition.
I'll play with the macro (?) after some Driving Juice and see how I go.
-
Ok here are a couple more for you. I forgot to change it to tungsten as Terry suggested so they are a bit yellow but you get the idea.


-
Okay, that first one in the last post is perfect.
What year is your tool?
Can someone with a real new one take the same pic?
The wire cutters on mine are a lot thinner and a different shape - they look a lot less sturdy.
-
My codes are 1200
-
Just a gentle prod for Hawk to take and post some pics for me

-
I will do it in the morning!!!
-
By the way it is a o4/03 That I got from the Land Down Under>
-
What am I? Some young sprout with eyes that work?
I can't see that tiny little pic!
- I'm trying to work out if the cutters have the same look as the first pic in Benner's reply (Reply #119)
(Mine are 1003 - and the cutters look a lot less substantial)
-
Nope they are the same. Unfortunatly the missus dropped the didgi and I am forced to use the phone >:(
But it appears to be the same as Benners.
-
Damnit!
Every one I have seen has been like Benners, yet mine is not.
What gives?
I'll try again to get a photo of it so y'all can see what I'm talking about.
-
I would be interested in seeing it. I was unaware other than the hard wire notch there are any variations.
-
A picture, in lieu of nothing being able to take photos.
Note the thinner cutters overall, and where they would overlap - the top model as "stops" further out from the plier head, but mine has flat all the way.
If I can't get an explanation from here (arguably the best Multitool resource in the world), I might have to take it on my next trip to the Leatherman Aus office.
Another oddity is the "E" in LEATHERMAN on the plier head is cut funny, but that obviously doesn't affect the function of the tool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login