My idea of cool EDC setup
-
Too many bloody cogs everywhere in steampunk stuff ::)
Sure I've posted this elsewhere, or was it Gareth

(from Hark A Vagrant)

Brass is good though

-
A long time ago i designed a pair of sunglasses with gears:

They have two polarised lenses in each side so by rotating the outer lense could change the amount of light allowed through. The gears keep both sides at the same orientation. The holes are for attaching a leather glare sheild similar to skiing sunglasses.
I hate to think how much they would have weighed, but perhaps they would have brought a smile to Brunels weary heart.
-
@Neil said:
Too many bloody cogs everywhere in steampunk stuff ::)Sure I've posted this elsewhere, or was it Gareth

(from Hark A Vagrant)

Brass is good though

Nope not me, flippin' funny though.@Tofty said:
A long time ago i designed a pair of sunglasses with gears:
They have two polarised lenses in each side so by rotating the outer lense could change the amount of light allowed through. The gears keep both sides at the same orientation. The holes are for attaching a leather glare sheild similar to skiing sunglasses.
I hate to think how much they would have weighed, but perhaps they would have brought a smile to Brunels weary heart.
those look awesome Tofty, a touch heavy on the nose perhaps, but awesome none-the-less.

-
@Tofty said:
A long time ago i designed a pair of sunglasses with gears:They have two polarised lenses in each side so by rotating the outer lense could change the amount of light allowed through. The gears keep both sides at the same orientation. The holes are for attaching a leather glare sheild similar to skiing sunglasses.
I hate to think how much they would have weighed, but perhaps they would have brought a smile to Brunels weary heart.
They could be quite useable if you replaced brass with some light alloy or plastic.
Good idea, cool looking glasses
-
Those gears do something. That's allowed ;)
Just needs hooking up to a light sensor and motor. Now that would add some weight :D
-
Damn it!
This thread got me thinking and then i couldn't help myself.....
The start of my brass based keychain.

So far iv'e got or made:
Tofty brass drilled pocket clip,
Tofty gentleman's mini slider pen in brass (GMS1),
Marbles brass compass,
Torq key with wikador brass bit holder.Eventually i plan to make:
Brass tritium vial holder,
Phosphor bronze measuring rod,
Brass cash container,
Aurora fire starter 2SA with custom brass tube. -
This thread got me thinking and then i couldn't help myself.....
The start of my brass based keychain.

So far iv'e got or made:
Tofty brass drilled pocket clip,
Tofty gentleman's mini slider pen in brass (GMS1),
Marbles brass compass,
Torq key with wikador brass bit holder.Eventually i plan to make:
Brass tritium vial holder,
Phosphor bronze measuring rod,
Brass cash container,
Aurora fire starter 2SA with custom brass tube.

-
that's very cool Tofty. 8)
-
Brass? Oxidation is a harsh mistress.
-
I'm looking forward to seeing how the finish on these pieces dull over time to a fine deep hue.
One more item off the list:
Brass tritium vial holder,
Brass cash container,
Phosphor bronze measuring rod,
Aurora fire starter 2SA with custom brass tube.

-
Nice progress!!
Looks 8) 8)
I like that pen, simple and beautifull!
-
The new tritium holder is excellent. Makes me think of a miners lamp in miniature.

-
This is where I've strted...
My EDC with
- Higonokami
- Brass Zippo

-
Nice setup Gojkan.. 8)

-
Thanks matey!!

I'll be moving to LED and pen now...
-
I really like those Higonokami knives, the script down the scales does it for me.
What brass torches are there? i haven't seen any around.
A bit more progress with my keychain:
Brass cash container,
Brass measuring rod,(i made one out of phosphor bronze but it just didn't look right)
Aurora fire starter 2SA with custom brass tube.



The measuring rod is 80mm long and 3/16" in diameter. I decided to cut only half of the rod to millimetre accuracy as the rod can simply be flipped round for anything longer than 40mm.
The cash container is just over 50mm long and 14mm in diameter with an internal cavity of 12.5mm. With the thread overlap being the other way round it would make a good peanut lighter holder.
Just need to buy some 20mm mcgizmo clips to connect the pen and compass to the keychain as well as finally receive the aurora fire starter i ordered awhile ago from the states so i can draw up the brass parts i'll need to make. Almost there......
-
Only ones I found are Peak LED Solution. I've sent them mail, but no response...
The best second is Maratac Copper AAA Led...
Or... With your craftmanship, you can make one....

-
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.
The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
-
@Tofty said:
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
As I'm told Energie is member here also, and here's his full brass version of E1E Surefire...
http://www.messerforum.net/showthread.php?t=72603
Maybe he can jump in here!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login