My idea of cool EDC setup
-
I'm looking forward to seeing how the finish on these pieces dull over time to a fine deep hue.
One more item off the list:
Brass tritium vial holder,
Brass cash container,
Phosphor bronze measuring rod,
Aurora fire starter 2SA with custom brass tube.

-
Nice progress!!
Looks 8) 8)
I like that pen, simple and beautifull!
-
The new tritium holder is excellent. Makes me think of a miners lamp in miniature.

-
This is where I've strted...
My EDC with
- Higonokami
- Brass Zippo

-
Nice setup Gojkan.. 8)

-
Thanks matey!!

I'll be moving to LED and pen now...
-
I really like those Higonokami knives, the script down the scales does it for me.
What brass torches are there? i haven't seen any around.
A bit more progress with my keychain:
Brass cash container,
Brass measuring rod,(i made one out of phosphor bronze but it just didn't look right)
Aurora fire starter 2SA with custom brass tube.



The measuring rod is 80mm long and 3/16" in diameter. I decided to cut only half of the rod to millimetre accuracy as the rod can simply be flipped round for anything longer than 40mm.
The cash container is just over 50mm long and 14mm in diameter with an internal cavity of 12.5mm. With the thread overlap being the other way round it would make a good peanut lighter holder.
Just need to buy some 20mm mcgizmo clips to connect the pen and compass to the keychain as well as finally receive the aurora fire starter i ordered awhile ago from the states so i can draw up the brass parts i'll need to make. Almost there......
-
Only ones I found are Peak LED Solution. I've sent them mail, but no response...
The best second is Maratac Copper AAA Led...
Or... With your craftmanship, you can make one....

-
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.
The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
-
@Tofty said:
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
As I'm told Energie is member here also, and here's his full brass version of E1E Surefire...
Maybe he can jump in here!
-
@Tofty said:
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
Tofty,
I can send you one of these to play with if you like and if it dies while you are playing no probs :salute:
MXDL quick mod
@kirk13 said: @sparky415 said: I needed a red light for the G/F as she wanted to look at star charts I took one of these torches apart and put a small bit o...
Multitool.Org Forum (multitool.ninja)
PS, I did take one to pieces for a red lens mod and it went back together OK :tu:
:cheers:
-
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.
The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
Tofty,
I can send you one of these to play with if you like and if it dies while you are playing no probs :salute:
MXDL quick mod
@kirk13 said: @sparky415 said: I needed a red light for the G/F as she wanted to look at star charts I took one of these torches apart and put a small bit o...
Multitool.Org Forum (multitool.ninja)
PS, I did take one to pieces for a red lens mod and it went back together OK :tu:
:cheers:
That could be :tu: :tu: I have one spare also... Or one Crelant AA with 3 modes...
-
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.
The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
As I'm told Energie is member here also, and here's his full brass version of E1E Surefire...
http://www.messerforum.net/showthread.php?t=72603
Maybe he can jump in here!
Who told you that? :think: :D
He sure is, doesn't post much but when he does, it's always :drool:
Here is another one of his creations. A smaller AAAA model.


Here is the original post from some 3 years back.
-
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.
The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
As I'm told Energie is member here also, and here's his full brass version of E1E Surefire...
Maybe he can jump in here!
Thanks for the link
Very interesting and super cool, amazed at what you can do with the right tools, skill and patience
Really liking this brass and copper stuff and those Higonokami knives are very nice
I'm not normally in to knives but wouldn't mined one 

-
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.
The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
As I'm told Energie is member here also, and here's his full brass version of E1E Surefire...
Maybe he can jump in here!
**Who told you that? **
:DHe sure is, doesn't post much but when he does, it's always

Here is another one of his creations. A smaller AAAA model.


Here is the original post from some 3 years back.
Oh just a guy passing trough... Not shure you know him!! Somewhat nerdish...
:D :D :D :D -
There's some really nice work in this thread, makes me wish I had a lathe :drool:
@Badwolf
I got mine from Rutlands but you might be able to find them cheaper (I can't remember where mine is living now ;) ) -
@sparky415 said:
There's some really nice work in this thread, makes me wish I had a lathe :drool:@Badwolf
I got mine from Rutlands but you might be able to find them cheaper (I can't remember where mine is living now ;) )Where ever he is... He's loved and taken care of!! :D :D :tu: :tu: :tu: :salute: :salute: :salute:
-
To be honest i was hoping not to be drawn into the world of torch modifying but i suppose these things happen.
This Energie chap does seem to have set the bar impossibly high, but that doesn't mean there's no point in trying.
Thanks Sparky for the offer but i had a look on ebay and just bought one, it costs so little i thought it was the best way.
So who wants one of these things if i make a few?
-
@Tofty said:
To be honest i was hoping not to be drawn into the world of torch modifying but i suppose these things happen.This Energie chap does seem to have set the bar impossibly high, but that doesn't mean there's no point in trying.
Thanks Sparky for the offer but i had a look on ebay and just bought one, it costs so little i thought it was the best way.
So who wants one of these things if i make a few?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
