My idea of cool EDC setup
-
@Tofty said:
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
As I'm told Energie is member here also, and here's his full brass version of E1E Surefire...
Maybe he can jump in here!
-
@Tofty said:
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
Tofty,
I can send you one of these to play with if you like and if it dies while you are playing no probs :salute:
MXDL quick mod
@kirk13 said: @sparky415 said: I needed a red light for the G/F as she wanted to look at star charts I took one of these torches apart and put a small bit o...
Multitool.Org Forum (multitool.ninja)
PS, I did take one to pieces for a red lens mod and it went back together OK :tu:
:cheers:
-
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.
The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
Tofty,
I can send you one of these to play with if you like and if it dies while you are playing no probs :salute:
MXDL quick mod
@kirk13 said: @sparky415 said: I needed a red light for the G/F as she wanted to look at star charts I took one of these torches apart and put a small bit o...
Multitool.Org Forum (multitool.ninja)
PS, I did take one to pieces for a red lens mod and it went back together OK :tu:
:cheers:
That could be :tu: :tu: I have one spare also... Or one Crelant AA with 3 modes...
-
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.
The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
As I'm told Energie is member here also, and here's his full brass version of E1E Surefire...
http://www.messerforum.net/showthread.php?t=72603
Maybe he can jump in here!
Who told you that? :think: :D
He sure is, doesn't post much but when he does, it's always :drool:
Here is another one of his creations. A smaller AAAA model.


Here is the original post from some 3 years back.
-
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.
The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
As I'm told Energie is member here also, and here's his full brass version of E1E Surefire...
Maybe he can jump in here!
Thanks for the link
Very interesting and super cool, amazed at what you can do with the right tools, skill and patience
Really liking this brass and copper stuff and those Higonokami knives are very nice
I'm not normally in to knives but wouldn't mined one 

-
Do you know of a small EDC torch that can be completely dismantled including the lense and light engine? if so i could make a brass casing that everything just slots back into. Otherwise it would be a major operation to cut away all the reusable parts from the aluminium frame without damaging them.
The peak torches look quite nice but it's useless if they no longer exist.
Turning copper isn't a very pleasant as i've discovered so it's odd that Maratac made the copper torch when a brass one would have been much easier and when shiney and new would have looked great in it's own right.
As I'm told Energie is member here also, and here's his full brass version of E1E Surefire...
Maybe he can jump in here!
**Who told you that? **
:DHe sure is, doesn't post much but when he does, it's always

Here is another one of his creations. A smaller AAAA model.


Here is the original post from some 3 years back.
Oh just a guy passing trough... Not shure you know him!! Somewhat nerdish...
:D :D :D :D -
There's some really nice work in this thread, makes me wish I had a lathe :drool:
@Badwolf
I got mine from Rutlands but you might be able to find them cheaper (I can't remember where mine is living now ;) ) -
@sparky415 said:
There's some really nice work in this thread, makes me wish I had a lathe :drool:@Badwolf
I got mine from Rutlands but you might be able to find them cheaper (I can't remember where mine is living now ;) )Where ever he is... He's loved and taken care of!! :D :D :tu: :tu: :tu: :salute: :salute: :salute:
-
To be honest i was hoping not to be drawn into the world of torch modifying but i suppose these things happen.
This Energie chap does seem to have set the bar impossibly high, but that doesn't mean there's no point in trying.
Thanks Sparky for the offer but i had a look on ebay and just bought one, it costs so little i thought it was the best way.
So who wants one of these things if i make a few?
-
@Tofty said:
To be honest i was hoping not to be drawn into the world of torch modifying but i suppose these things happen.This Energie chap does seem to have set the bar impossibly high, but that doesn't mean there's no point in trying.
Thanks Sparky for the offer but i had a look on ebay and just bought one, it costs so little i thought it was the best way.
So who wants one of these things if i make a few?

-
@sparky415 said:
There's some really nice work in this thread, makes me wish I had a lathe
Me too. But the money :ahhh
@edcgear said:
Oh just a guy passing trough... Not shure you know him!! Somewhat nerdish...
:D :D :D :DYea, that seems about right. :D :D

-
@sparky415 said:
There's some really nice work in this thread, makes me wish I had a lathe
@Badwolf
I got mine from Rutlands but you might be able to find them cheaper (I can't remember where mine is living now ;) )Thank you
Count me in on wanting a lathe, seen some nice kit out there, the Proxxon stuff is real nice 
-
Well I know its not copper or brass but what about a bit of gold, just seen this at http://www.heinnie.com/product.asp?strParents=&CAT_ID=0&P_ID=7193



-
@badwolf said:
Well I know its not copper or brass but what about a bit of gold, just seen this at http://www.heinnie.com/product.asp?strParents=&CAT_ID=0&P_ID=7193 :tu:I saw that recently, goinggear has them for $70 (plus $5.20 shipping to our part of the world) , looks like a great flashlight. I believe it was said that they, Klarus, were the OEM for the 47s Preon Revo flashlights, but I could never confirm.
http://goinggear.com/klarus-x6-the-midas-torch-gold-plated-aaa-xp-g-r5-flashlight.html
-
Well i've just received my MXDL and Aurora fire starter so a bit more brass work would be on the way except for the fact that my primary computer's PSU seems to have had enough (hopefully that's all it is) so no CAD drawing for a while.
The MXDL comes apart nice and simply with the press fitted end cap just needing some encouragement from a bench vice and a 14mm spanner and the lens/reflector/light engine assembly coming out with finger pressure.
I'll start a thread in the flashlight section when i've decided how to proceed with this project. -
Make sure to add link here... Can't wait to see progress!!

-
So far I've managed to come to this...
- Brass Zippo w/Z Plus Butane insert
- Higo No Kami w/brass Liners
- Vintage leather bifold wallet (my father bought this one in Bulgaria while he was there on Table Tennis European Championship as part of Yugoslavia team back in 60's - never used)
- Vintage manual Omega (also bought by my dad in mid 50's while he was in Hanomag Henschel company in Kassel Germany on speSmurfpillsation, he wear it everyday, still works punctually, I like it although it's a bit small for my wrist, or I'm used to G-Shock size LOL)
And while waiting on Case slipjoints and modded Vic and looking for Brass LED and pen I have this for rotation:
- Elk Ridge slippie (this one is responcible for me being hooked to slippie pattern)
- Fisher X 750 pen
And some more pics
-
Great vintage look on the last pic.. 8) 8)
-
Allof the pics in this thread are outstanding! I always think of the original equipment of EDC when brass is brought up. Brass makes me think of folding monaculars, pocket watches and pocket sundials and compasses, examples:
http://www.stanleylondon.com/sundialcompsml.htm
http://www.stanleylondon.com/Opencompyellow.htmSome of the original sundials could be quite accurate with solar declination, and other features to allow for time of year and location . Almost all of the modern offerings are now more ornamental than functional. And much of it is of dubious quality. The edc of yesteryear is remarkable.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
