Gerber Balance
-
At this point in the year they are probably waiting for the Shot Show so they can <u>re</u>-announce it for 2012 ::)
Yep, Im sure that's the plan! They want it to unveil it for 2012. They should re-name it to the "Actual Balance" or the "Suspense".
Is Shot in Jan?
Yep, the 17th thru the 20th.

-
Hmm I wonder what they would be doing with a re-design. Apart from aesthetics, they dont have too many tools to play with. Maybe one handed opening on the blade? That would be sweet.
In a way shame for us UK users the knife is locking, otherwise would be legal.
-
I'm kinda hoping that they're loosing the smaller bit driver. Surely the whole point behind having a standard bit driver is that it can give you a huge range of size and type of tips?
Doesn't that make having the smaller one somewhat redundant? -
what would you have them replace it with?
-
I guess i could argue for or against the additional driver. It's a pretty limited slot or space for whatever goes there. 2 bigger issues for me are #1. Why they didn't go with a standard bit size. And #2 if the tool will actually be produced. I've said before that the tool is a tad complex in construction and function. I totally believe that they may have run into production or cost roadblocks. Given that, what will be the changes that make the tool a reality? I am skeptical about the Shot show re-release because if they had a date then their promised retailers would know and they would be more forthcoming with specific information as to what part of 2012 it would appear. Hope they get er done soon though. It is an interesting design and I'd love to see how it does for Gerber. Gerber may very well be taking this design very seriously. It's very different for them and done correctly could be a big seller. So, all this limbo could be their just wanting to get it right before release. That would be very smart
-
-
Yeah, a file crossed my mind... Or a pen or an awl or something. I think a file makes the most sense. You might be able to fit a saw (thin). I'm also still waiting for that beverage holder :)
-
Would have to be the next 'most used tool' after knife, screwdriver, and scissors.
Would file fit that category? awl? prybar?
Some sort of awl/prybar combo (is that even possible!?) would be perfect IMO.
-
Nice!
-
Accujohn can you post pictures of this with it lying on its side, so we can see the implements in open and closed position when looking down on the handles rather than from the side. I want to get an idea of how wide it is, because it looks very fat.
-
-
Ok first, here are some shots to help with thickness. Let me know if I got this right



-
I mentioned a few times before that this tool is a tad complex in construction... lotsa parts and tight fits. Here is a picture of just 1 example. This is the pivot joint behind the sliding pliers and button lock. It's why I can see them having production/cost issues.

-
good pictures John.

-
Its a shame the pliers are so thin. They look almost LM squirt like in terms of their narrowness and profile.
I can see the reason, its to fit the knife and scissors in the outside opening configuration.
But that isn't a necessity, the Vic Spirit handles this perfectly to give one example, the long deep tools like its file, knife, saw, and scissors are all at the edge of the handles, and reside under the curved lip, so they don't take up any extra space, and the pliers are nice and fat.
Now I don't know if that is possible with the sliding plier head gerbers, but I always find it a shame when you have a tool like this and the pliers seem too small for the tool, like a 'shrunken head' almost.
-
Ok, If we are comparing the pliers to a SQUIRT then a few size comparison pictures are in order because that's not a fair comparison. My bad for not doing a size reference shot until now :) This is the Balance next to my old JUICE C2. I don't have a Squirt. The Plier head to it's handle ratio is another issue, but the pliers are very usable. Also keep in mind that the pivot is hidden under the handle (unlike the juice) so you have to add that to the actual size of the Balance pliers vs. Juice. Cheers!



-
another for handle thickness/ length

-
Nice comparison pics ;)
Just to clarify my original post, its not so much the size that I was comparing to a squirt, but the 'design' in terms of the thickness of the pliers. And yes, whereas the tool is larger than a juice, its plier heads are about the same size, which is exactly what I was saying, its disproportionate which for some reason bugs me, but I can begin to see its a necessity with the way the tool is designed.
You do make a good point that because the pivot is hidden in the handle, that makes the pliers look smaller. I wonder how that affects how much force you can get out of them?
Would you be able to compare its size to Vic spirit, or LM charge?
-
Btw, the pliers feel very strong and sure. Good grip too. I don't, however, have any plans to put it to the test since it's a prototype.
A long time ago in my knife collecting days I found a one of a kind Benchmade with a damascus blade and no cutting edge applied to it. ( not dull, no edge bevel at all). It was interesting but at the time i thought a knife w/o an edge was like a bull without balls. So i had Shane Sibert apply a custom edge to it. At any rate, i never heard the end of it on the BM forum. I ruined an extreme rarity, yada yada. Live and learn :)
On charge/spirit request..i don't have either of those models at the moment. You could send them to me though ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login