Gerber Balance
-
Would have to be the next 'most used tool' after knife, screwdriver, and scissors.
Would file fit that category? awl? prybar?
Some sort of awl/prybar combo (is that even possible!?) would be perfect IMO.
-
Nice!
-
Accujohn can you post pictures of this with it lying on its side, so we can see the implements in open and closed position when looking down on the handles rather than from the side. I want to get an idea of how wide it is, because it looks very fat.
-
-
Ok first, here are some shots to help with thickness. Let me know if I got this right



-
I mentioned a few times before that this tool is a tad complex in construction... lotsa parts and tight fits. Here is a picture of just 1 example. This is the pivot joint behind the sliding pliers and button lock. It's why I can see them having production/cost issues.

-
good pictures John.

-
Its a shame the pliers are so thin. They look almost LM squirt like in terms of their narrowness and profile.
I can see the reason, its to fit the knife and scissors in the outside opening configuration.
But that isn't a necessity, the Vic Spirit handles this perfectly to give one example, the long deep tools like its file, knife, saw, and scissors are all at the edge of the handles, and reside under the curved lip, so they don't take up any extra space, and the pliers are nice and fat.
Now I don't know if that is possible with the sliding plier head gerbers, but I always find it a shame when you have a tool like this and the pliers seem too small for the tool, like a 'shrunken head' almost.
-
Ok, If we are comparing the pliers to a SQUIRT then a few size comparison pictures are in order because that's not a fair comparison. My bad for not doing a size reference shot until now :) This is the Balance next to my old JUICE C2. I don't have a Squirt. The Plier head to it's handle ratio is another issue, but the pliers are very usable. Also keep in mind that the pivot is hidden under the handle (unlike the juice) so you have to add that to the actual size of the Balance pliers vs. Juice. Cheers!



-
another for handle thickness/ length

-
Nice comparison pics ;)
Just to clarify my original post, its not so much the size that I was comparing to a squirt, but the 'design' in terms of the thickness of the pliers. And yes, whereas the tool is larger than a juice, its plier heads are about the same size, which is exactly what I was saying, its disproportionate which for some reason bugs me, but I can begin to see its a necessity with the way the tool is designed.
You do make a good point that because the pivot is hidden in the handle, that makes the pliers look smaller. I wonder how that affects how much force you can get out of them?
Would you be able to compare its size to Vic spirit, or LM charge?
-
Btw, the pliers feel very strong and sure. Good grip too. I don't, however, have any plans to put it to the test since it's a prototype.
A long time ago in my knife collecting days I found a one of a kind Benchmade with a damascus blade and no cutting edge applied to it. ( not dull, no edge bevel at all). It was interesting but at the time i thought a knife w/o an edge was like a bull without balls. So i had Shane Sibert apply a custom edge to it. At any rate, i never heard the end of it on the BM forum. I ruined an extreme rarity, yada yada. Live and learn :)
On charge/spirit request..i don't have either of those models at the moment. You could send them to me though ;)
-
No, it's a fair sized tool. Not sure of weight. Aluminum scales help, I'm sure, but still on the hefty side... Just checked advertised specs: 3.8" length fully closed. And weight 7oz. Alternately the fully loaded juice xe6 is a half inch shorter but nearly the same weight at 6.7oz. Thickness on the balance is just over 5/8" or exactly 11/16".
-
hmm 3.8 inch length is very close to the 4 inch length of charge/spirit tools.
That is a real shame, this tool has the bare minimum on it, the most useful tools, in a nice package. But if it is going to be the same size as a LM charge or Vic Spirit, or even close, then it cannot compete, they pack pretty much everything under the sun.
This would have had to be LM juice width and length for it to really stand out.
-
@Raukodur said:
hmm 3.8 inch length is very close to the 4 inch length of charge/spirit tools.That is a real shame, this tool has the bare minimum on it, the most useful tools, in a nice package. But if it is going to be the same size as a LM charge or Vic Spirit, or even close, then it cannot compete, they pack pretty much everything under the sun.
This would have had to be LM juice width and length for it to really stand out.
I'm sorry to say I agree with this, and this tool has just lost a fair chunk of appeal for me. Up to the size on an XE6 I could have lived with. Beyond that, there's several other tools I'd rather have in my pocket. That's a real shame actually as I was looking forward to this new "small" tool :-\
-
Well that's what these forums are for... To be informed. All above points taken (and valid), it's still a very cool design and very pocket friendly for it's size. To appreciate it, you have to place more value on the one hand opening pliers, larger blade and bit drivers etc.
-
one handed opening pliers doesnt make much sense if the rest of the tools arent OHO, real shame they didn't make that a feature of the knife ???
Who knows, maybe they will make some changes before release, that is if they still plan to release it.
-
@Raukodur said:
one handed opening pliers doesnt make much sense if the rest of the tools arent OHO, real shame they didn't make that a feature of the knife ???Who knows, maybe they will make some changes before release, that is if they still plan to release it.
I'm not sure I agree with that. Yes, it might be nice if some if the other tools were also OHO, but the fact they aren't doesn't make the fact the pliers are less useful IMO. That's certainly true of my MP400 and 600 anyway. :)
I'm also sure we'll see a new version at SHOT, lets just hope it makes it onto the shop shelves this time. :D
-
Doesnt make the pliers less useful, no, but surely anyone in their right mind at Gerber would realise that if they are going to use that as an advertising point for the tool (which they may not), it would be strengthened considerably by being able to say the other 'essential' tools are also OHO, especially the knife.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login