Ultimate essentials SAK mod idea
-
@Raukodur said:
The answer to the latter question is 'yes', in fact the meaning of my name is the same as the meaning of yours.With regards to what bare necessities means, I recommend watching the disney cartoon of the Jungle Book, and even if you have/haven't to watch this youtube clip of a song in it:
Of course, a cleaver play on words is being used by Baloo the bear there, i.e. the 'bear' necessities rather than 'bare' necessities.
'Bare necessities' means the absolute minimum that is necessary. Which is the logic behind my thoughts on this mod.
You mean minimalist ?
-
@Raukodur said:
Steve, is the cost because of the black alox scales I mentioned? Ideally I want HA scales, so in a way it doesn't matter what the starting colour is, but I'm guessing those are even more expensive and hard to get.Bob, that is a good idea to send a message to Neil, I will get right on that. The cybertool should definitely have arrived by early in the new year, and that has all the tools I want on it, so can ship that off to him if he agrees.
Now in terms of a name... thank you for the suggestion Metropolicity, but given the small hardcore tweezer nature of the SAK pliers, 'Ultimate Gripper' would be a parody of a name :D
I suppose I would have to think about why I am making the mod, and that is the essential nature of these tools compared to the rest found on a SAK or multitool, in my experience anyway, and the desire for a minimalist tool.
So something including one or more of the following, or something similar:
Urban
Minimalist
Essentials
City
Bare Necessities (I have watched the Disney Jungle Book recently)No specific name coming to mind yet will think about it more.
HA Scales are very hard to find but you may be able to get someone to make them that way. Most of the cost I mentioned above is due to the fact of how many alox knives you will have to buy to get all the parts.
-
Maybe I am missing something basic here
.Why would I need to get the implements from alox scaled SAKs? Are they build differently from non-alox SAKs? The cybertool 34 I bought has all the implements I want on it, would it be possible to use those with alox scales?
-
The cybertool is 91mm and alox are 93mm. And yes that's makes a big difference. That's why you need the alox, for the scales and springs.
-
Ah, that clarifies things, thank you so much. Something basic like this I was totally ignorant of.
So my plan is not going to work with the cybertool 34 I bought if I am set on alox scales.
What's the alternative, is there any cybertool bit driver which fits the alox scales?
-
Well I know all the tools you listed will work with the exception of the bit driver. I haven't worked with that one so maybe Neil can chime in on that.
-
if the bit driver cannot work, that would rule alox out, correct?
Any other sort of metal, or similarly 'non-plastic' or decorative materal (e.g. bone, horn) tough materials used for scales?
-
Wood,micarta, g10,bone,ivory, just about anything you can think of could be made into scales.
-
Guess I'm going to have to wait for Neil to get in touch before I can move further with this :-\
Thanks for all the info guys.
-
Received the cybertool 34 today, very very nice tool. Already quite slim, although with a hefty weight for its size, which is reassuring.
Just looking at it and thinking of my mod is quite exciting will make it even slimmer and cut out some of the weight.
Now just need to hear back from Neil about whether he can do it for me.
-
Neil on holiday at the moment? any idea on his return?
-
Hes 'off sick' at the moment hopefully to return soon

-
So Rahmed told me that the awl cannot be put behind the scissors, in the same way the hook can, so unfortunately it seems this idea would not work.
The alternatives are to forget the awl altogether, but it is such a useful tool.
Or I can have another layer, and along with an end opening awl (which is better than the midway opening style) have another 'half length' tool.
The one I think would be most useful would be a small metal saw / file.
Is it possible to have the thick, Mike Horn wenger type awl opening at the end of the tool, if it uses the slot normally taken by a corkscrew?
-
And another question, apart from the Mike Horn ranger metal saw/file, is there another vic/wenger half size version of this tool?
Seems like the other alternatives have a file, but no metal saw edge.
-
Maybe you should counsider doing it on 93mm alox frame
-
I agree but like Steven said, the bit driver and holder could be a problem since apparently nobody has tried to fit those in a 93mm SAK as of yet :)
Would be very cool though, an alox CyberTool. Count me in. -
unfortunately cannot happen, the cybertool bit driver cannot be put on a 93mm alox frame :(
Anyone know the answer to the two questions:
-
if the mike horn ranger awl can fit in the space of the corkscrew and 'end-open' rather than 'middle-open'?
-
if there are any 'half size' metal saw/file tools for SAKs apart from the mike horn ranger?
-
-
Actually forget it, given how expensive the mike horn ranger is, this would jus tbe an academic question.
Far as I can see, there are no other metal saw/files which are half size the full length one.
-
Actually I think the cybertool could fit on a alox frame. Gimmie a little time and I'll see.
-
:o :o :o :o
please let it be so!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login