Ultimate essentials SAK mod idea
-
Maybe I am missing something basic here
.Why would I need to get the implements from alox scaled SAKs? Are they build differently from non-alox SAKs? The cybertool 34 I bought has all the implements I want on it, would it be possible to use those with alox scales?
-
The cybertool is 91mm and alox are 93mm. And yes that's makes a big difference. That's why you need the alox, for the scales and springs.
-
Ah, that clarifies things, thank you so much. Something basic like this I was totally ignorant of.
So my plan is not going to work with the cybertool 34 I bought if I am set on alox scales.
What's the alternative, is there any cybertool bit driver which fits the alox scales?
-
Well I know all the tools you listed will work with the exception of the bit driver. I haven't worked with that one so maybe Neil can chime in on that.
-
if the bit driver cannot work, that would rule alox out, correct?
Any other sort of metal, or similarly 'non-plastic' or decorative materal (e.g. bone, horn) tough materials used for scales?
-
Wood,micarta, g10,bone,ivory, just about anything you can think of could be made into scales.
-
Guess I'm going to have to wait for Neil to get in touch before I can move further with this :-\
Thanks for all the info guys.
-
Received the cybertool 34 today, very very nice tool. Already quite slim, although with a hefty weight for its size, which is reassuring.
Just looking at it and thinking of my mod is quite exciting will make it even slimmer and cut out some of the weight.
Now just need to hear back from Neil about whether he can do it for me.
-
Neil on holiday at the moment? any idea on his return?
-
Hes 'off sick' at the moment hopefully to return soon

-
So Rahmed told me that the awl cannot be put behind the scissors, in the same way the hook can, so unfortunately it seems this idea would not work.
The alternatives are to forget the awl altogether, but it is such a useful tool.
Or I can have another layer, and along with an end opening awl (which is better than the midway opening style) have another 'half length' tool.
The one I think would be most useful would be a small metal saw / file.
Is it possible to have the thick, Mike Horn wenger type awl opening at the end of the tool, if it uses the slot normally taken by a corkscrew?
-
And another question, apart from the Mike Horn ranger metal saw/file, is there another vic/wenger half size version of this tool?
Seems like the other alternatives have a file, but no metal saw edge.
-
Maybe you should counsider doing it on 93mm alox frame
-
I agree but like Steven said, the bit driver and holder could be a problem since apparently nobody has tried to fit those in a 93mm SAK as of yet :)
Would be very cool though, an alox CyberTool. Count me in. -
unfortunately cannot happen, the cybertool bit driver cannot be put on a 93mm alox frame :(
Anyone know the answer to the two questions:
-
if the mike horn ranger awl can fit in the space of the corkscrew and 'end-open' rather than 'middle-open'?
-
if there are any 'half size' metal saw/file tools for SAKs apart from the mike horn ranger?
-
-
Actually forget it, given how expensive the mike horn ranger is, this would jus tbe an academic question.
Far as I can see, there are no other metal saw/files which are half size the full length one.
-
Actually I think the cybertool could fit on a alox frame. Gimmie a little time and I'll see.
-
:o :o :o :o
please let it be so!
-
Well if anyone wants to donate a used cybertool to the cause that would help. It may be simple,it may not.
-
The cybertool bit driver should work with a spring (or two/three, actually, the bit driver is pretty thick compared to most tools) from a different tool, and a bit of grinding/filing. You'll need to make a different bit holder for it, though; since the pin spacing is all wrong you can't use the original springs and bit holder. Or you could make a small piece to balance the spring on the opposite side, leave the center empty, dump the bits inside, and let them rattle. :ahhh
It's mostly just a matter of how much time and effort you want to put into it. :)
I know it's not quite the same, but I'm almost done with my 84mm alox bit driver, just a couple more things to do, mostly making a piece for the opposing side to balance the spring out. If I get a chance, I'll start a new post and get some WIP pics up, just been soo busy lately, I haven't had time to do much of anything but work/eat/sleep.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login