Wave Owners Club
-
very nice
. where did you get the blades from? and did you make the thumb studs? -
@5hif7y said:
very nice
. where did you get the blades from? and did you make the thumb studs?The black blade is from a black XTi that I am modding into something else that doesn't need the blade and the stainless one is also from a defunctional XTi that I modded into the Mjolnirman.
The thumb studs are made from shards of aluminum press fit into the thumbhole, then a circular hole was machined out and then a turned stud was press fit into place (with some super glue for extra security). The thumbstud on the giant awl was done but heating the specific area with a butane torch until it lost its temper and a hole drilled out (the rest is unaffected)
-
A couple of 25th Anniversary Waves, one with a special "25 YEARS" logo." The former owner of it tells me it was a prototype that Leatherman briefly considered, before going with the standard one.

prototype stamping top, standard stamping below

Dang these shiny buggers are hard to get a decent photo of :P

-
Oh my, that is a great score Bob! 8) Nice pics also. :)
-
Is it time for me to have my Wave rant again yet? :D
-
-
Nice proto wave Bob, if recalled correctly, the 25th roundel (or something like that)was on Charge Silver Sterling

i'm just about to post latest addition to old/latter/latest Wave :D :D
It was a user before, so that was a prompt to post pics.. ::) -
@jojotlc said:
Nice proto wave Bob,** if recalled correctly, the 25th roundel (or something like that)was on Charge Silver Sterling**
i'm just about to post latest addition to old/latter/latest Wave :D :D
It was a user before, so that was a prompt to post pics.. ::)Ah, good eye Johari, I had not noticed that!

-
Count me in, here is my new wave, it's been my regular edc for 2+ years.

-
Is it time for me to have my Wave rant again yet? :D
remind me mate, was it just the original Wave you couldn't stand, or was it the new one as well?

;)
It was the original one actually Gareth. Would one care for me to divulge as to why? :D
Oh, go on then. ::)
:D
-
Ok. If I must. :D
My previous rants sum it up well, so here is a cut and paste...
The first thing I don't like is the number of flat headed screwdrivers. Why have 4 ??? That just seems such a waste to me which brings me on to my second issue which is that it doesn't have an awl. I just cant understand why Leatherman would see it a better option to have 4 flat head screwdrivers over 3 with an awl.
I also really don't like how much flex there is in the handles. As I have a few other LM's, including the PST and Supertool, this was really disappointing as one thing I always liked about LM was how strong they felt. I could cope with it if it was just noticable when using the pliers, but it is also quite noticable when using one of the screwdrivers (one of the FOUR flatheads I expect ::)).
I don't like the liner locks either. When I received my Wave one of the locks was broken, so it was sent off to LM to be repaired where they actually replaced both handles with new parts. When I got it back, I tried it and noticed that the lock didn't really engage very well on one of the blades ( a common find with these and the Charge I hear) and that it failed very very easily. This lock now engages much further but still fails very easily with just a lightish tap on the top of the blade. This admittedly could probably be fixed by LM though.
Lastly (yes the rant is nearly over :D) I think that my major dislike with this tool is how disappointed I am with it. I expected so much more from it TBH as I always considered the Wave (or Charge) to be the "ultimate" multitool and I guess that by getting one and not really liking it just makes me even more sour about it.
-
i see your point. for me the screw drivers are great as i dont need a awl but do need a selection of drivers for my standard day at work. i prefer the newer model though with the bit exchanger its easer for me to have the right tools with me. i never noticed any problems with the locking blades but i could of been a lucky one.
new model is much better than the old one IMHO.
-
I've said it before, I have a love hate relationship with the wave. I just don't like the tiny little detent on the liner lock that holds the blade in the closed position. I have zero faith that it will stay tight beyond even a year of use. Between that and the fact that a Skeletool blade(same concept, different tool) came out while I was using the tool as a screwdriver and you have a bad vibe.
If they would make a serious effort in demonstrating a firm detent system then I would be more apt to buy a wave and EDC it. My blast blade CAN'T come open on my because of the inherent design: the handles are closed with the blade stuck inside them while you are using the drivers. Even if the blast itself becomes loose and the handles start opening too easily, you can tighten them up. Heck, I've even bent the part that engages the plier wedges back with a hammer and a punch to tighten the tool up. I just prefer the simple, effective design of the Blast and it's ilk to the Wave and it's OHO novelty. I carry at least one other blade with me at all times so I don't really need to get at the blade on my MT with lightning speed.
-
I'm surprised as to just how much I do like the Wave. It's got a lot of potential shortcomings that put me off getting one for a long time.
Primarily the fact I'm a south paw and the Wave most certainly isn't really put me off. Also I've no real love for the bit driver (that I'd used on the Skele) and definitely not the small bit driver (that I owned, and never used, on my Blast). I have however managed to get past all these and found myself actually liking the Wave.
Though still not the small bit driver, I've yet to use that for anything. ::) :DPosted elsewhere but here's how I managed to OHO and right handed blade with my left hand.
(http://www.youtube.com/watch?v=P5Ni-AUN3D4#)
Not nearly as quick or smooth as it would be right handed, but at least it works and is safe. :) -
@Mercury said:
I've said it before, I have a love hate relationship with the wave. I just don't like the tiny little detent on the liner lock that holds the blade in the closed position. I have zero faith that it will stay tight beyond even a year of use. Between that and the fact that a Skeletool blade(same concept, different tool) came out while I was using the tool as a screwdriver and you have a bad vibe.If they would make a serious effort in demonstrating a firm detent system then I would be more apt to buy a wave and EDC it. My blast blade CAN'T come open on my because of the inherent design: the handles are closed with the blade stuck inside them while you are using the drivers. Even if the blast itself becomes loose and the handles start opening too easily, you can tighten them up. Heck, I've even bent the part that engages the plier wedges back with a hammer and a punch to tighten the tool up. I just prefer the simple, effective design of the Blast and it's ilk to the Wave and it's OHO novelty. I carry at least one other blade with me at all times so I don't really need to get at the blade on my MT with lightning speed.
i have a love hate relationship with the skeletool. sometimes i think its really ugly and other times i just lone it. i do think its a great tool i just have moments where im unsure of it. it is a Favourite of mine though.
-
I've been edc'ing a wave and a skeletool for acouple years now and I've never had the blades open up on me. I've even dropped them many times and the blades have never moved past the detent, and when the pliers are out on the wave both blades are locked closed.
I don't think OHO is a novelty, on an edc tool i'm not a fan of having to completely unfold the tool, search for the blade, open it, and then close the tool so I can now use my blade. I've edc'd my wave more than any other MT or folder that I own and it's been by far the most useful and the least novelty.
I think the bit driver is a good idea, even if you don't want to carry around bits it still has a phillips and a flat bit that came in the driver, which is just as much as most tools... It would be nice if it had more reach though. I agree the small bit driver is pretty useless, I've only used it once on a pair of glasses.
YMMV
-
The Wave's my favorite! Count me in!!

-
I read a thread on another forum a few months ago, about a poster who dropped his Wave while at work. When the poster reached down to pick the Wave up off the floor, he noticed one of the knife blades had opened up. The poster said that if he had just "grabbed" the tool off the floor (like he normally would have done), he would have been cut very badly. Because of this, the poster said he "immediately" gave this Wave (and his back-up Wave) away to co-workers, and went back to carrying another model (I forgot which one) where the handles have to be opened to retrieve the blades.
-
i see it as revenge for dropping it. drop your tool and it will bite you. i trust my wave and if i drop it i will look befor i pick up. thanks for the warning

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login