Wave Owners Club
-
Is it time for me to have my Wave rant again yet? :D
remind me mate, was it just the original Wave you couldn't stand, or was it the new one as well?

;)
It was the original one actually Gareth. Would one care for me to divulge as to why? :D
Oh, go on then. ::)
:D
-
Ok. If I must. :D
My previous rants sum it up well, so here is a cut and paste...
The first thing I don't like is the number of flat headed screwdrivers. Why have 4 ??? That just seems such a waste to me which brings me on to my second issue which is that it doesn't have an awl. I just cant understand why Leatherman would see it a better option to have 4 flat head screwdrivers over 3 with an awl.
I also really don't like how much flex there is in the handles. As I have a few other LM's, including the PST and Supertool, this was really disappointing as one thing I always liked about LM was how strong they felt. I could cope with it if it was just noticable when using the pliers, but it is also quite noticable when using one of the screwdrivers (one of the FOUR flatheads I expect ::)).
I don't like the liner locks either. When I received my Wave one of the locks was broken, so it was sent off to LM to be repaired where they actually replaced both handles with new parts. When I got it back, I tried it and noticed that the lock didn't really engage very well on one of the blades ( a common find with these and the Charge I hear) and that it failed very very easily. This lock now engages much further but still fails very easily with just a lightish tap on the top of the blade. This admittedly could probably be fixed by LM though.
Lastly (yes the rant is nearly over :D) I think that my major dislike with this tool is how disappointed I am with it. I expected so much more from it TBH as I always considered the Wave (or Charge) to be the "ultimate" multitool and I guess that by getting one and not really liking it just makes me even more sour about it.
-
i see your point. for me the screw drivers are great as i dont need a awl but do need a selection of drivers for my standard day at work. i prefer the newer model though with the bit exchanger its easer for me to have the right tools with me. i never noticed any problems with the locking blades but i could of been a lucky one.
new model is much better than the old one IMHO.
-
I've said it before, I have a love hate relationship with the wave. I just don't like the tiny little detent on the liner lock that holds the blade in the closed position. I have zero faith that it will stay tight beyond even a year of use. Between that and the fact that a Skeletool blade(same concept, different tool) came out while I was using the tool as a screwdriver and you have a bad vibe.
If they would make a serious effort in demonstrating a firm detent system then I would be more apt to buy a wave and EDC it. My blast blade CAN'T come open on my because of the inherent design: the handles are closed with the blade stuck inside them while you are using the drivers. Even if the blast itself becomes loose and the handles start opening too easily, you can tighten them up. Heck, I've even bent the part that engages the plier wedges back with a hammer and a punch to tighten the tool up. I just prefer the simple, effective design of the Blast and it's ilk to the Wave and it's OHO novelty. I carry at least one other blade with me at all times so I don't really need to get at the blade on my MT with lightning speed.
-
I'm surprised as to just how much I do like the Wave. It's got a lot of potential shortcomings that put me off getting one for a long time.
Primarily the fact I'm a south paw and the Wave most certainly isn't really put me off. Also I've no real love for the bit driver (that I'd used on the Skele) and definitely not the small bit driver (that I owned, and never used, on my Blast). I have however managed to get past all these and found myself actually liking the Wave.
Though still not the small bit driver, I've yet to use that for anything. ::) :DPosted elsewhere but here's how I managed to OHO and right handed blade with my left hand.
(http://www.youtube.com/watch?v=P5Ni-AUN3D4#)
Not nearly as quick or smooth as it would be right handed, but at least it works and is safe. :) -
@Mercury said:
I've said it before, I have a love hate relationship with the wave. I just don't like the tiny little detent on the liner lock that holds the blade in the closed position. I have zero faith that it will stay tight beyond even a year of use. Between that and the fact that a Skeletool blade(same concept, different tool) came out while I was using the tool as a screwdriver and you have a bad vibe.If they would make a serious effort in demonstrating a firm detent system then I would be more apt to buy a wave and EDC it. My blast blade CAN'T come open on my because of the inherent design: the handles are closed with the blade stuck inside them while you are using the drivers. Even if the blast itself becomes loose and the handles start opening too easily, you can tighten them up. Heck, I've even bent the part that engages the plier wedges back with a hammer and a punch to tighten the tool up. I just prefer the simple, effective design of the Blast and it's ilk to the Wave and it's OHO novelty. I carry at least one other blade with me at all times so I don't really need to get at the blade on my MT with lightning speed.
i have a love hate relationship with the skeletool. sometimes i think its really ugly and other times i just lone it. i do think its a great tool i just have moments where im unsure of it. it is a Favourite of mine though.
-
I've been edc'ing a wave and a skeletool for acouple years now and I've never had the blades open up on me. I've even dropped them many times and the blades have never moved past the detent, and when the pliers are out on the wave both blades are locked closed.
I don't think OHO is a novelty, on an edc tool i'm not a fan of having to completely unfold the tool, search for the blade, open it, and then close the tool so I can now use my blade. I've edc'd my wave more than any other MT or folder that I own and it's been by far the most useful and the least novelty.
I think the bit driver is a good idea, even if you don't want to carry around bits it still has a phillips and a flat bit that came in the driver, which is just as much as most tools... It would be nice if it had more reach though. I agree the small bit driver is pretty useless, I've only used it once on a pair of glasses.
YMMV
-
The Wave's my favorite! Count me in!!

-
I read a thread on another forum a few months ago, about a poster who dropped his Wave while at work. When the poster reached down to pick the Wave up off the floor, he noticed one of the knife blades had opened up. The poster said that if he had just "grabbed" the tool off the floor (like he normally would have done), he would have been cut very badly. Because of this, the poster said he "immediately" gave this Wave (and his back-up Wave) away to co-workers, and went back to carrying another model (I forgot which one) where the handles have to be opened to retrieve the blades.
-
i see it as revenge for dropping it. drop your tool and it will bite you. i trust my wave and if i drop it i will look befor i pick up. thanks for the warning

-
@MTguy said:
I've been edc'ing a wave and a skeletool for acouple years now and I've never had the blades open up on me. I've even dropped them many times and the blades have never moved past the detent, and when the pliers are out on the wave both blades are locked closed.I don't think OHO is a novelty, on an edc tool i'm not a fan of having to completely unfold the tool, search for the blade, open it, and then close the tool so I can now use my blade. I've edc'd my wave more than any other MT or folder that I own and it's been by far the most useful and the least novelty.
I think the bit driver is a good idea, even if you don't want to carry around bits it still has a phillips and a flat bit that came in the driver, which is just as much as most tools... It would be nice if it had more reach though. I agree the small bit driver is pretty useless, I've only used it once on a pair of glasses.
YMMV
Perhaps novelty is too strong a word for it, but I am just not a fan of the OHO system on the wave. IMHO, the thumb hole is an awkward shape and a poor substitute for the spyderhole. The liner lock, while a decent design, is sometimes executed poorly and it DOES make it past QC as Benner's story indicates. The detent is just too small for me to be comfortable with, in my experiences tools get a bit loose over time. Heck, my original PST(before I lost it) was so loose you could flick open the handles like a butterfly knife then flick the blade out. It didn't extend all the way every time but you get the picture. After some tightening it was back to factory tightness and function. The problem with the wave is, after you wear down that little nib that holds the blade in, you can't just wrench down on the handles to hold it anymore because then you'll have a hell of a time opening the tool.
I agree with the bit driver as well, I like it and wish they made it an option for the blast. As for the blades coming open while driving screws, I have found that it may be a result of my technique when working a tough fastener. It doesn't happen every time but that skele was in a position to cut me to the bone had I not been paying attention.
This is just my very personal opinion about one facet of what I still think is a good tool all around, so please take no offense. I see MANY people both here and in my personal life who love the wave and will buy no other. I don't see myself as right or wrong, I just prefer the traditional style MT over the Wave. heck, how many people talk about the Blast? Not many, which means a lot of folks have issues with it not unlike my issue with the wave. A ton of people hate that mini driver but It handles my glasses with ease, I could not do without it.
Point is, as you said, YMMV. And on this forum, we have traveled a TON of miles.
Cap
I always check my tools and knives before I pick them up after dropping them, I learned that one the hard way! :D
5hif7y
I happen to really like the appearance of the Skele, but the same detent issue prevents me from really wanting to carry it. If both these tools had a better blade detent, even just a larger one, I would definitely carry them!
-
@Mercury said:
This is just my very personal opinion about one facet of what I still think is a good tool all around, so please take no offense. I see MANY people both here and in my personal life who love the wave and will buy no other. I don't see myself as right or wrong, I just prefer the traditional style MT over the Wave. heck, how many people talk about the Blast? Not many, which means a lot of folks have issues with it not unlike my issue with the wave. A ton of people hate that mini driver but It handles my glasses with ease, I could not do without it.Point is, as you said, YMMV. And on this forum, we have traveled a TON of miles.
I'm with you all the way there Merc
I tend to carry some of the less popular tools too. Are they categorically better than any other tool? Nope, just better for me (in certain settings). I'm a big advocate in trying lots of different things before deciding what works best for you, and often found myself rather surprised with the results. My modified (empty handled) Wave that I use for work is at home needing a thorough clean down, so I nearly put a Blast in my pocket today - switched it for the MP700 at the last moment, which many people would avoid like the plague -
@Mercury said:
The problem with the wave is, after you wear down that little nib that holds the blade in, you can't just wrench down on the handles to hold it anymore because then you'll have a hell of a time opening the tool.I can't agree with that. From my experience (I've disassembled the Wave about 6 times past few days just for fun, now I'm out of thread locking fluid and the tool tends to unscrew itself with use :D) you can tighten the handle screws that hold external blades and plier head so much that it's impossible to open any blade with one hand and still have no problems opening the pliers.

So even if you wear out the nib it is possible to tighten the tool enough that the bleed won't open by itself.
PS. I'm also not a huge fan of small bit driver.
-
If you do manage to wear down the little nib then this would be covered by the warranty.
-
What's the blade indent like on the charge? I don't own one and was wondering if it keeps it closed better than the wave?
-
-
Yea, I've found that if I have the bit extender in, and I'm spinning a screw, that I have to be careful or my thumb will catch a blade hole and pull it out slightly. Almost an "ouch" moment.
-
@Dunc said:
If you do manage to wear down the little nib then this would be covered by the warranty.A very good point!
@turnsouth said:
Yea, I've found that if I have the bit extender in, and I'm spinning a screw, that I have to be careful or my thumb will catch a blade hole and pull it out slightly. Almost an "ouch" moment.That's what happens to me. It is only in that scenario too, when using the screwdrivers. Any other time the blades stay closed just fine.
-
I took no offense to it, and I didn't mean any in my post. It's a good forum because everyone can share their opinions. Everyone has different needs for their MT so a tool that might be perfect for some people may not suit another person as well. Also even though a wave is a wave, quality control is never the same on every tool made so my experiences are not going to be the same as everyone's.
I do agree the thumbhole is no spyderhole and I do like to carry a dedicated folder whenever I can. If i'm carrying a folder I don't care if my MT is OHO or not, actually my last 3 tools have all been "traditional" MT's. But when I can't carry a folder or if I don't want to then the wave is my first choice.
I don't have any experience with the blast, I've just never had the opportunity to play with it, i'll keep my eye out for one though. I just bought a ST300 and I love it, it's just a little big for edc Lol.
I know what you mean about the mini-driver, it's kind of a love-hate thing because I've only used it once or twice but when I needed to it was a huge saver. It's just the least used implement on my wave.
As far as the skeletool goes, I like the design, the weight, and all the carry options it has but I don't edc it as much as I thought I would. If I don't care about the weight then I carry a slightly heavier and larger tool for more functionality. And when I do care about the size/weight I find myself just carrying a SAK. That being said I still really love the tool and I think it's a pretty innovative tool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login