Got me an MPT
-
Worked for me too :D
-
Whats with you being an Admin now anyway, has Def gone mad ;) :P And he's dropped you down to 1 star... what you done to deserve that

I paid him lots and lots of money, and showered him with diamonds, rubies and flattering compliments. :D
Lol :D I knew it must have cost you a bit ;) I was going to say I'll be an admin one day, but I just don't have enough diamonds to offer him.. never mind :D
-
I'm sure he'll accept flousies if you've got some spare, and I'll take a couple too if your offering :D
-
@micky d said:
I'm sure he'll accept flousies if you've got some spare, and I'll take a couple too if your offering :D
:D
Well I haven't got any spare at this moment in time micky, but it might be an easier way through than getting some diamonds. Let me work on it :P ;)
Ok well you've got my email address :D
-
Ok, here are the MPT pics as promised.
First up is the tool closed;

My MPT is different to that of Mikes, so I do have the "speed bumps" that Spoonrobot refers to in his thread. This makes opening and closing very stiff and the handles close with a snap. Mine also has the file edge that Spoonrobot has.
Next up are a couple of the plier head;


I really like the pliers. The head is a nice size and shape and looks like it has had little to no use.
Below is a picture of half of the implements. Here you can see the only real wear on this tool which is on the phillips;

More tools...

And lastly, a pic showing the rolled edges. I am still torn as to whether these improve the comfort or not.


-
Good pics benner, nice collectable multitool is that MPT :)
Is the tool next to the straight blade a smaller blade or something else?
-
That tool is an awl/punch if i remember rightly. The tools been on my list for a while now, just waiting till i have a few of the others before i get one of these.
-
@Roadie said:
That tool is an awl/punch if i remember rightly. The tools been on my list for a while now, just waiting till i have a few of the others before i get one of these.It is an awl yes. Looks quite handy actually.
I like the tool, but my biggest complaint is the snap in the blades. There is none. None at all. Infact they are the worst I have ever seen in any tool or knife and that includes some knock offs. But maybe that is just my one.
-
That tool is an awl/punch if i remember rightly. The tools been on my list for a while now, just waiting till i have a few of the others before i get one of these.
It is an awl yes. Looks quite handy actually.
I like the tool, but my biggest complaint is the snap in the blades. There is none. None at all. Infact they are the worst I have ever seen in any tool or knife and that includes some knock offs. But maybe that is just my one.
Hmmm, it will be interesting to see if mikes is like that. Are the tools stiff, if so it probably wont be so much of a problem?
-
That tool is an awl/punch if i remember rightly. The tools been on my list for a while now, just waiting till i have a few of the others before i get one of these.
It is an awl yes. Looks quite handy actually.
I like the tool, but my biggest complaint is the snap in the blades. There is none. None at all. Infact they are the worst I have ever seen in any tool or knife and that includes some knock offs. But maybe that is just my one.
Hmmm, it will be interesting to see if mikes is like that. Are the tools stiff, if so it probably wont be so much of a problem?
Not really. When the knife blade is open for example it takes very little force to close it.
-
For the feature-obsessed like myself; another variant of the MPT. Based on the changes I believe this is the latest model made before discontinuation.
Differences between my other MPT:
1.) Round fasteners/rivets at the plier pivots instead of the hex bolts. Not sure if these are rivets since they are so uniform and clean but who ever heard of round bolts?


2.) The file is ground for a large flathead driver at the end and has the fine/coarse sides reversed. This is the same file model as benner's black oxide version below but his lacks the other differences.


3.) The awl has a nailnick inplace of the cut-out, has more severe angles on the cutting edges and has the cutting edges reversed from the earlier version.


4.) The lanyard ring and large flathead implements are replaced by a thick and a thin washer. This may be due to the new awl design being incrementally thicker than the old.

5.) The cutouts for the backsprings are shorter and less refined than earlier. I did not note a difference in the amount of lock pressure though.

6.) The plier tips are thinner. This may be a simple production variation not specific to this model but the finishes between the two are also different enough that I suspect this was a concious change.

7.) Miscellaneous; the overall finish and the finishes on some of the implements are much different but I'm not sure if this is counts.
So far I think that is 4 different variants. The easily seen features that seperate them:
A.) Scallops on only one side of the handles. "Shoulders" on the handles at the plier pivots.
B.) Scallops on both sides of the handles.
C.) Scallops on both sides of the handles, black oxide finish.
D.) Scallops on both sides of the handles, no lanyard ring or large flathead driver, round fasteners at the plier pivots. -
Great pics Spoon, thanks for sharing.
Does anyone know how long the MPT was in production for? I thought that it wasn't particularly long, but with all these variables I am beginning to think it was produced for longer than I thought.

-
Hmmm, no idea how long the MPT was in production. ???
There are indeed more variables out there than I'd ever suspected! Take those handle cutouts for instance. Looking very closely, you can see that the longer ones were cut with a milling machine. (An expensive process for sure).
Whereas the model with shorter cutouts was stamped out of the sheet metal that way, then was formed into a channel shape.
I would wager a considerable amount of money that the long-cutouts model came first, followed by the short-cutouts model after Gerber retooled their stamping dies.

-
Only you would notice that Bob. :P Interesting thing to point out though. It looks like this could have run for a few years then ??? I can't imagine changes to production like these happening that quickly.
-
-
if i remember right,when i bought my rk62 bayonet army knife mentioned on other thread,i got this gerber catalogue that i might have somewhere still,mpt´s were in it and those...plierbased....i just cant remember..hmm.
well anyway i was so sad since i didnt have the money to buy mpt and rk62,both of them,and i choosed rk62 and just drooled that catalogue.
-
@Tarrodemierda said:
if i remember right,when i bought my rk62 bayonet army knife mentioned on other thread,i got this gerber catalogue that i might have somewhere still,mpt´s were in it and those...plierbased....i just cant remember..hmm.well anyway i was so sad since i didnt have the money to buy mpt and rk62,both of them,and i choosed rk62 and just drooled that catalogue.
Any possibility you could post a picture or a scan of te MPT catalogue page?
-
yep if i find that old cat,i have quite few outdoor/weapon/gear/knife catalogues from last....almost twnety years around.
if i find it and go to someone who has a scanner,ill post it or email to you.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login