Leatherman OHT
-
-
How much do you think the tool weights ?
I really wished it would be fully closed or with just little space between the scales but I'm still buying it.
OHT weight is claimed to be 9.9oz / 280.66 g :salute:
There is nothing really special about it then - 280 g for 4,5 " platform tool :gimme:
On the photos Leatherman provided it looks much better :drool: because I think this is how the tool is looking like in Fall 2012.
Can't wait to buy one. Once again I will have to import the tool from USA to Poland:)
Here is another video:
-
One of the engineers who worked on it pointed out to us that the plier heads on this one actually locked outside the rail on this one, to a reinforced section of frame, so that even if the scales were sawed through the pliers would still function. Apparently this reinforced section goes about halfway down the plier handle making it exceptionally strong.
As one who has never managed to crush Gerber handles with my manly hands and other forms of abuse, I can appreciate the gesture, but I have to wonder if it was really necessary.
Additionally, I am not a fan of the 2D phillips or stubby saw on a large tool like this.
When it comes to a saw, size matters, and I'd happily lose either the flathead screwdriver or the can opener to get the extra inch or so. Maybe that's just me, but those are my thoughts.
Def
-
I think the intent is good here but they should head back to the drawing board for a few reasons. I agree about the saw length, a short saw is about as useful as an unsharpened awl. The 2d phillips is a huge turnoff for me, the phillips on my tools is one of the most important elements. The stubby little tools on the OHT are kinda funny looking, they would fit really well on a juice sized tool but here they are equivalent to putting a mini bit driver on a surge, I never understood that either.

For me though, the biggest detractor is the size of the pliers. The just look so tiny on top of the huge handles. Not that the size wouldn't be useful, but it looks like the handles may get in the way of serious use. At least the ST300 is tapered so the handles aren't in the way, but then again the ST300 has big beefy pliers.
All that being said, if they come out with it I will likely buy it for fun, but I don't see it becoming my EDC simply because I can have full sized tools on the REBAR, and I prefer that style anyway.
-
I agree- I will get an OHT for the collection and for testing and eavaluation, but like the MUT, it won't see any significant use after the initial review period.
In the defense of this 2D phillips, while I don't like it, it probably is no worse than the flattened phillips bit on bit driver models like the Charge.
Def
-
@Grant Lamontagne said:
I agree- I will get an OHT for the collection and for testing and eavaluation, but like the MUT, it won't see any significant use after the initial review period.
**
In the defense of this 2D phillips, while I don't like it, it probably is no worse than the flattened phillips bit on bit driver models like the Charge.**Def
Hadn't thought of that. :D
While I do like those bits, I prefer dedicated drivers. I have a tool kit in my truck with every 1/4 inch hex bit made and a double those at home. I don't need bits with my MT.
-
-
For me though, the biggest detractor is the size of the pliers. The just look so tiny on top of the huge handles.
+1 now that you mention it, it does look like an unwholesome union between a full size MT and keychain size pliers.

As with any tool, there are tradeoffs. Leatherman has obviously felt that the (theoretically) stronger sliding plier mechanism was worth the extra space it takes up. So, if you allot more space to a mechanism, it has to be made up somewhere else, either by making the head smaller or the handles bigger. The OHT is pretty close to being unweildly as it is, so it really shouldn't be made any bigger and the result is a smaller plier head.
These photos are also of prototypes, and the OHT may go through some more changes before it's release, so don't get too upset yet over the details.
Def
-
The more I scrutinize the OHT, the less I'm liking it..... :(
Way better design than any Gerber sliding tools, but this one just looks too bulky and heavy. The outside opening configuration on this tool is a brilliant idea, but some of those tools like very lacking.
Hoping for a civilian version (scissors instead of belt cutter) in stainless or gray Cerakote!
-
Official realease photos of the OHT:




Def
-
Though I'm not interested in this model, I can see uses for a saw outside the woodland/jungle scenarios. Cutting stiff hose, plastic shrouds, wood crate sections, heavy corrugated cardboard, etc, are much easier with a saw, even a short saw rather than a plain edge or serrated knife.
Mike
-
It looks like a Transformer toy, with all the decorations on the outside
-
@Mike said:
Though I'm not interested in this model, I can see uses for a saw outside the woodland/jungle scenarios. Cutting stiff hose, plastic shrouds, wood crate sections, heavy corrugated cardboard, etc, are much easier with a saw, even a short saw rather than a plain edge or serrated knife.Mike
First off, congratulations on 1,500 posts!
Second off, yes I realize that saws are better for cutting hoses and so on, but all saws work on a push/pull basis. The longer the saw, the more of a cut you can make on each puch or pull, regardless of the material you are cutting and that's what gets me about this- the potential for a large saw is there, but squandered.
It's around teh same length as a PowerLock saw, which I have always berated as almost useless.
Def
-
Maybe it's just my eyes, but the plier heads don't look that small to me. If you think the plier pivot isn't fully deployed (or exposed like on a standard large LM), which gives the tool the appearance of "shoulders" either side of the head. We didn't actually see any comparison photos of plier heads between this and the charge did we?

Yes the saw is a bit short, but short is better than missing when you need one. I still hope this takes off and they release a "scissors and awl" version. I'm looking forward to the revies when it finally hits the shelves
-
@Grant Lamontagne said:
Though I'm not interested in this model, I can see uses for a saw outside the woodland/jungle scenarios. Cutting stiff hose, plastic shrouds, wood crate sections, heavy corrugated cardboard, etc, are much easier with a saw, even a short saw rather than a plain edge or serrated knife.
Mike
First off, congratulations on 1,500 posts!
Second off, yes I realize that saws are better for cutting hoses and so on, but all saws work on a push/pull basis. The longer the saw, the more of a cut you can make on each puch or pull, regardless of the material you are cutting and that's what gets me about this- the potential for a large saw is there, but squandered.
It's around teh same length as a PowerLock saw, which I have always berated as almost useless.
Def
LOL! I didn't even notice my post count. Thanks!
I know short saws are somewhat limited, and in many cases useless. In fact, I don't think I've ever really "had" to use a saw on a multi or SAK come to think of it.

I'd rather have an awl anyhow, it's more useful to me.
Mike
-
I don't mind the lack of scissors , never did get along well with any of the Leatherman iterations , and prefer to use a Vic. 58mm for small scissoring tasks .
I think to get a real idea on utility , you have to see/handle the beast .
Chris
-
Can they at least make the deploy mechanism for the pliers spring loaded with a button... switchplierman anyone?
-
The function of this new tool from Leatherman is great, and the quality is just fine.
I've no doubt it is as strong as Leatherman's design engineer assured us it is. But yet I'm still just not warming up to the OHT. As has been stated several times already, the proportions just don't seem right. It has 4" multitool pliers and blades, on a 4.5" frame. :-\So how about if the plier jaws were longer, and slightly wider/stronger? And we get rid of the can opener and one of those flat screwdrivers so we can have a longer knife blade, and a more useful saw? And while we're at it lets take a notch out of the handle scale, so that a full 3D phillips screwdriver would fit in there. Y'know, something like this:

A few little changes like that and I might take a hankering to this tool :)
-
Better patent that configuration quick Bob!
Def
-
I`m liking the Bob variation better.
:DThe more I look at the OHT the more I try one out. :) It still needs an awl.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




