Leatherman OHT
-
Official realease photos of the OHT:




Def
-
Though I'm not interested in this model, I can see uses for a saw outside the woodland/jungle scenarios. Cutting stiff hose, plastic shrouds, wood crate sections, heavy corrugated cardboard, etc, are much easier with a saw, even a short saw rather than a plain edge or serrated knife.
Mike
-
It looks like a Transformer toy, with all the decorations on the outside
-
@Mike said:
Though I'm not interested in this model, I can see uses for a saw outside the woodland/jungle scenarios. Cutting stiff hose, plastic shrouds, wood crate sections, heavy corrugated cardboard, etc, are much easier with a saw, even a short saw rather than a plain edge or serrated knife.Mike
First off, congratulations on 1,500 posts!
Second off, yes I realize that saws are better for cutting hoses and so on, but all saws work on a push/pull basis. The longer the saw, the more of a cut you can make on each puch or pull, regardless of the material you are cutting and that's what gets me about this- the potential for a large saw is there, but squandered.
It's around teh same length as a PowerLock saw, which I have always berated as almost useless.
Def
-
Maybe it's just my eyes, but the plier heads don't look that small to me. If you think the plier pivot isn't fully deployed (or exposed like on a standard large LM), which gives the tool the appearance of "shoulders" either side of the head. We didn't actually see any comparison photos of plier heads between this and the charge did we?

Yes the saw is a bit short, but short is better than missing when you need one. I still hope this takes off and they release a "scissors and awl" version. I'm looking forward to the revies when it finally hits the shelves
-
@Grant Lamontagne said:
Though I'm not interested in this model, I can see uses for a saw outside the woodland/jungle scenarios. Cutting stiff hose, plastic shrouds, wood crate sections, heavy corrugated cardboard, etc, are much easier with a saw, even a short saw rather than a plain edge or serrated knife.
Mike
First off, congratulations on 1,500 posts!
Second off, yes I realize that saws are better for cutting hoses and so on, but all saws work on a push/pull basis. The longer the saw, the more of a cut you can make on each puch or pull, regardless of the material you are cutting and that's what gets me about this- the potential for a large saw is there, but squandered.
It's around teh same length as a PowerLock saw, which I have always berated as almost useless.
Def
LOL! I didn't even notice my post count. Thanks!
I know short saws are somewhat limited, and in many cases useless. In fact, I don't think I've ever really "had" to use a saw on a multi or SAK come to think of it.

I'd rather have an awl anyhow, it's more useful to me.
Mike
-
I don't mind the lack of scissors , never did get along well with any of the Leatherman iterations , and prefer to use a Vic. 58mm for small scissoring tasks .
I think to get a real idea on utility , you have to see/handle the beast .
Chris
-
Can they at least make the deploy mechanism for the pliers spring loaded with a button... switchplierman anyone?
-
The function of this new tool from Leatherman is great, and the quality is just fine.
I've no doubt it is as strong as Leatherman's design engineer assured us it is. But yet I'm still just not warming up to the OHT. As has been stated several times already, the proportions just don't seem right. It has 4" multitool pliers and blades, on a 4.5" frame. :-\So how about if the plier jaws were longer, and slightly wider/stronger? And we get rid of the can opener and one of those flat screwdrivers so we can have a longer knife blade, and a more useful saw? And while we're at it lets take a notch out of the handle scale, so that a full 3D phillips screwdriver would fit in there. Y'know, something like this:

A few little changes like that and I might take a hankering to this tool :)
-
Better patent that configuration quick Bob!
Def
-
I`m liking the Bob variation better.
:DThe more I look at the OHT the more I try one out. :) It still needs an awl.
-
Didn't Gerber just do the whole 'cut-out' thing to get a 3D Phillips on the new MP600? I'm sure LM wouldn't want to borrow any ideas from Gerber. ;)
Seriously though mate I do rather like the look of that, though I'd happily drop the serrated edge blade for a good file.
-
I like bob's edit there, I'd definitely buy that.

-
@J-sews said:
So how about if the plier jaws were longer, and slightly wider/stronger? And we get rid of the can opener and one of those flat screwdrivers so we can have a longer knife blade, and a more useful saw? And while we're at it lets take a notch out of the handle scale, so that a full 3D phillips screwdriver would fit in there. Y'know, something like this:A few little changes like that and I might take a hankering to this tool :)
Yea, but how do I open a beer, eh?
:D -
So how about if the plier jaws were longer, and slightly wider/stronger? And we get rid of the can opener and one of those flat screwdrivers so we can have a longer knife blade, and a more useful saw? And while we're at it lets take a notch out of the handle scale, so that a full 3D phillips screwdriver would fit in there. Y'know, something like this:
A few little changes like that and I might take a hankering to this tool :)
Yea, but how do I open a beer, eh?
:Djust like We, the students from Poland: you use another beer to open the first one. And of course then you need to buy another one to open the second one and then anoth...
-
@Fistach said:
just like We, the students from Poland: you use another beer to open the first one. And of course then you need to buy another one to open the second one and then anoth...Yeah... right.

I've never learned that trick, can't open bottles with a lighter either.
There are so many tools and SAKs out there that do open bottles and cans, that I never really needed to learn something like that
On topic: can't wait to see the production version of the OHT

-
Yuk! I don't like the OHT at all. I don't like the bulk, I hate the "stealth" military Transformers look and I dislike how small all the tools are.
The Rebar is it's opposite and a beautiful tool. The OHT is in my eyes a toy.
-
There have been some good suggestions for changes to the OHT made here. I would like to see the strap cutter left off and scissors added, but this tool is aimed at the military market and the strap cutter is important to them .
-
@MeadMaker said:
There have been some good suggestions for changes to the OHT made here. I would like to see the strap cutter left off and scissors added, but this tool is aimed at the military market and the strap cutter is important to them .Dont any military guys need scissors? What about medics?
-
Medics probably have more than one set of scissors on them already. As for other military people, I'm not sure. I'll ask my son if the Gerber MT that the Army issued him has scissors on it and whether or not he had a need for them while he was deployed.
The strap cutter is rather important. Soldiers that are currently deployed use vehicles a lot and the IED is the enemy's favorite way to attack them. Many Soldiers stopped wearing their seat belts because they believed that the belts could keep them from exiting a burning vehicle quickly. The Army"s statistics show that there Solders are much more likely to be injured because of not being secured during an explosion or roll over, but the Solders still tend to leave the seat belts off. In order to get the solders to wear the belts the Army issued strap cutters to be carried by the Soldiers. The hope was that the Soldiers would now feel that they could exit a burning vehicle quickly after cutting the belts. The use of seat belts has increased, but many soldiers do not wear them.
I learned about this seat belt issue because my son learned his seat belt lesson the hard way. While on a combat patrol the HUMVEE his squad was traveling in was blown up by an IED. He was in the turret manning the machine gun. When the bomb exploded he was thrown out of the turret and landed about 20 feet away. Luckily he only suffered a mild concussion an some cracked ribs. His buddies were all knocked unconscious and suffered minor injuries from being tossed around inside the vehicle. If they had all been wearing their seat belts they would most likely have suffered fewer injuries.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




