What Did You Use Your Multitool For Today?
-
I've been using my sideclip like crazy today for opening boxes, cutting up my lunch, and prying things.
-
Some electrical DIY stuff... all with my old buddy swisschamp, a portable bit driver and a few rolls of tape.
First I converted an UK mains plug of a cable to a Schuko, to use it without need of an adapter.

Then, lights time. I had a simple lamp directly hanged on the ceiling and it was lacking some power. So I merged three holders into a single power connection.

Attached the stuff on the ceiling

Lamps on

And let there be light :-)

Much better. Plenty of light now. In fact I think I went a little overboard :ahhh
EDIT: I've checked the lamps specs from the maker's (philips) site and each lamp gives about 1500 lumen. So I have there 4500 lumen for an area of 23m² / 250 square feet.

-
Cleaned out the trap in the walk-in shower. Had to go fetch my Spirit to remove the cover plate though though, the #1 Phillips on the SOG wasn't up to it
-
I used the pliers on my paratool and the pliers on my SL pliers to undo the bolts on my youngests little MT and add a large washer as i removed the blade
its all nice and tight now and smooth 
-
I am using one jaw of the P4 pliers head as a poker to push things out. It is the right size for the job.
-
I used the saw on my Swiss Champ for a bit of tree pruning while out dog walking and the again to saw a paddy whack dog treat in two, excellent little saw

-
@50ft-trad said:
Cleaned out the trap in the walk-in shower. Had to go fetch my Spirit to remove the cover plate though though, the #1 Phillips on the SOG wasn't up to it
I always use the multi-purpose hook on my CyberTool for that. Probably a different type of trap:
The cover lifts up quite easily but it's secured by 3 Phillips head screws. The SOG's driver was too small, so I grabbed one of the "old faithfuls"
-
At work last night i used the awl on my paratool to make new holes on a chalkboard frame to re-fit the hooks for the string, basikly the other side had a better board on it so i reversed the board, the awl on the sog is great, i then used its pliers to tighten the hooks in

-
...yesterday I too used the awl on my SAK to make a hole in a cabinet bigger (Battery in thed rill ran out and could not be bothered to get the AC one) so that I could put in a "pin" for a shelf...
-
I used my Spirit X to help put together a Sony Blu-Ray display in a Sam's Club. I think I need to add a small adjustable wrench to my setup....
-
OR , you can get one of these

-
I might need to dust off my first gen Piranah off, either that, or start carrying one of my small 4inch adjustable wrenches, like what 3bdul3zeez pictured.

-
Bahco do a really high quality 4" shifter. Mine stays in my EDC Organiser and has come in useful more than once.

-
Bahco are good!
6''
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




