What Did You Use Your Multitool For Today?
-
@50ft-trad said:
Cleaned out the trap in the walk-in shower. Had to go fetch my Spirit to remove the cover plate though though, the #1 Phillips on the SOG wasn't up to it
I always use the multi-purpose hook on my CyberTool for that. Probably a different type of trap:
The cover lifts up quite easily but it's secured by 3 Phillips head screws. The SOG's driver was too small, so I grabbed one of the "old faithfuls"
-
At work last night i used the awl on my paratool to make new holes on a chalkboard frame to re-fit the hooks for the string, basikly the other side had a better board on it so i reversed the board, the awl on the sog is great, i then used its pliers to tighten the hooks in

-
...yesterday I too used the awl on my SAK to make a hole in a cabinet bigger (Battery in thed rill ran out and could not be bothered to get the AC one) so that I could put in a "pin" for a shelf...
-
I used my Spirit X to help put together a Sony Blu-Ray display in a Sam's Club. I think I need to add a small adjustable wrench to my setup....
-
OR , you can get one of these

-
I might need to dust off my first gen Piranah off, either that, or start carrying one of my small 4inch adjustable wrenches, like what 3bdul3zeez pictured.

-
Bahco do a really high quality 4" shifter. Mine stays in my EDC Organiser and has come in useful more than once.

-
Bahco are good!
6''
-
Sorry I looked :-[

:D
-
:ahhh :ahhh :ahhh That's evil!
...should be here by the end of the week :-[
By the way - they've got Bahco Laplanders for only £15

... that should be here at the same time :-[ :-[ (Beats buying replacement blades though)
-
lol, you are so easily lead. :D Thankfully my Laplander is perfectly sharp enough ATM.
-
Mine still works, but you can tell it's not working at it's best anymore. Now is the right time to be getting one ready to replace it. I can't believe how much work that thing has done
-
I used my Gerber MP600 today to remove the bodyside clips for a rocker molding on a Toyota highlander. I was thankful for my blast when my boss decided he wanted to use my gerber and snatched it up off the floor while I was pulling off the actual molding. Then, in my frustration at one particularly stubborn clip, I was lining up my pliers on it with my finger and they slipped off, catching my finger in the large gripping area and giving me this painful little bugger:

-
That's a doozy! I actually gave myself a bit of a pinch with my Wave earlier today, but nothing near as nasty as that one. :(
-
I've used awl on my P4 to drill a hole near bottom of plastic 2lit bottle. There is no water at my current demolition site and I need to wash my hands. So improvised tap. The screw is just to mark the hole, you actualy unscrew lid to depressurize bottle and start water...


Sent from my Android Paranoid
-
@edcgear said:
I've used awl on my P4 to drill a hole near bottom of plastic 2lit bottle. There is no water at my current demolition site and I need to wash my hands. So improvised tap. The screw is just to mark the hole, you actualy unscrew lid to depressurize bottle and start water...

Sent from my Android Paranoid
That is awesome! Great idea and nicely done!
@Gareth said:
That's a doozy! I actually gave myself a bit of a pinch with my Wave earlier today, but nothing near as nasty as that one. :(Mine is healing quite nicely; I drained it by making a small incision with a fresh razor, then covered it with neosporin and a bandaid until this morning. It is just a bit tender now with no bleeding, but it did bleed for the rest of the day when I did it, and until i bled it, it hurt like mad. I don't often care too much about cuts, and I usually ignore them after cleaning them but this hurt!
How did you get yourself with your wave?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


